Publications 2023

Ahmadi Soufivand A, Faber J, Hinrichsen J, Budday S, Multilayer 3D bioprinting and complex mechanical properties of alginate-gelatin mesostructures, Sci Rep 13(1) (2023) 11253. (B09)

Andrade Mier MS, Dalton PD, Stahlhut P, Bakirci E, Blum R, Villmann C, Primary Glial Cell and Glioblastoma Morphology in Cocultures Depends on Scaffold Design and Hydrogel Composition, Adv Biol (Weinh) doi:10.1002/adbi.202300029  (2023) e2300029. (B01, C05)

Chayanun S, Soufivand AA, Faber J, Budday S, Lohwongwatana B, Boccaccini AR, Reinforcing tissue‐engineered cartilage: Nano fibrillated cellulose enhances mechanical properties of Alginate Dialdehyde‐Gelatin (ADA‐GEL) hydrogel, Advanced Engineering Materials doi:10.1002/adem.202300641  (2023). (B09)

Czerwinski T, Bischof L, Böhringer D, Kara S, Wittmann E, Winterl A, Gerum R, Nusser G, Wiesinger M, Budday S, Lux A, Voskens C, Fabry B, Mark C, doi:10.1101/2023.04.20.537658  (2023). (A01, B09, C02)

Genc H, Cianciosi A, Lohse R, Stahlhut P, Groll J, Alexiou C, Cicha I, Jungst T, Adjusting Degree of Modification and Composition of gelAGE-Based Hydrogels Improves Long-Term Survival and Function of Primary Human Fibroblasts and Endothelial Cells in 3D Cultures, Biomacromolecules doi:10.1021/acs.biomac.2c01536  (2023). (B02, B09)

Grossbacher G, Bartolf-Kopp M, Gergely C, Bernal PN, Florczak S, de Ruijter M, Rodriguez NG, Groll J, Malda J, Jungst T, Levato R, Volumetric Printing across Melt Electrowritten Scaffolds Fabricates Multi-Material Living Constructs with Tunable Architecture and Mechanics, Adv Mater doi:10.1002/adma.202300756  (2023) e2300756. (Z01)

Gruhn T, Ortiz-Monsalve C, Salehi S, Structure formation of rod-like fillers in a contraction flow, Physics of Fluids doi:10.1063/5.0143006  (2023). (B03)

Hahn L, Zorn T, Kehrein J, Kielholz T, Ziegler AL, Forster S, Sochor B, Lisitsyna ES, Durandin NA, Laaksonen T, Aseyev V, Sotriffer C, Saalwachter K, Windbergs M, Poppler AC, Luxenhofer R, Unraveling an Alternative Mechanism in Polymer Self-Assemblies: An Order-Order Transition with Unusual Molecular Interactions between Hydrophilic and Hydrophobic Polymer Blocks, ACS Nano doi:10.1021/acsnano.3c00722  (2023). (A03)

Hazur J, Röder J, Czwalinna J, Schubert DW, Boccaccini AR, Pre‐Crosslinking with Hydrogel Microparticles Enhances the Printability of Alginate‐Based Inks, Macromolecular Materials and Engineering doi:10.1002/mame.202200675  (2023). (A01, A07)

Heinritz C, Ng XJ, Scheibel T, Bio‐inspired Protein‐Based and Activatable Adhesion Systems, Advanced Functional Materials doi:10.1002/adfm.202303609  (2023). (A08, C01)

Kahl M, Schneidereit D, Meinert C, Bock N, Hutmacher DW, Friedrich O, A fluorescence-based opto-mechatronic screening module (OMSM) for automated 3D cell culture workflows, Biosensors and Bioelectronics: X 14 (2023). (B08 (Z02))

Karakaya E, Schobel L, Zhong Y, Hazur J, Heid S, Forster L, Tessmar J, Boccaccini AR, Detsch R, How to Determine a Suitable Alginate for Biofabrication Approaches using an Extensive Alginate Library?, Biomacromolecules doi:10.1021/acs.biomac.2c01282  (2023). (B06, A02, A01)

Khadem E, Kharaziha M, Salehi S, Colorimetric pH-responsive and hemostatic hydrogel-based bioadhesives containing functionalized silver nanoparticles, Mater Today Bio 20 (2023) 100650. (B03)

Kockelmann J, Zentel R, Nuhn L, Post‐Polymerization Modifications to Prepare Biomedical Nanocarriers with Varying Internal Structures, their Properties and Impact on Protein Corona Formation, Macromolecular Chemistry and Physics doi:10.1002/macp.202300199  (2023). (B05)

Lang G, Sonnleitner D, Biomimetic Protein‑based Elastomers – Processing and Properties of regenerated B. mori silk and recombinant spider silk fibers, Royal Society of Chemistry doi: (2022). (A07)

Lamberger Z, Zainuddin S, Scheibel T, Lang G, Polymeric Janus Fibers, Chempluschem 88(2) (2023) e202200371. (A07)

Martinez-Sanchez LDC, Ngo PA, Pradhan R, Becker LS, Boehringer D, Soteriou D, Kubankova M, Schweitzer C, Koch T, Thonn V, Erkert L, Stolzer I, Gunther C, Becker C, Weigmann B, Klewer M, Daniel C, Amann K, Tenzer S, Atreya R, Bergo M, Brakebusch C, Watson AJM, Guck J, Fabry B, Atreya I, Neurath MF, Lopez-Posadas R, Epithelial RAC1-dependent cytoskeleton dynamics controls cell mechanics, cell shedding and barrier integrity in intestinal inflammation, Gut 72(2) (2023) 275-294. (A01)

Mueller JPJ, Dobosz M, O’Brien N, Abdoush N, Giusti AM, Lechmann M, Osl F, Wolf A-K, Arellano-Viera E, Shaikh H, Sauer M, Rosenwald A, Herting F, Umaña P, Colombetti S, Pöschinger T, Beilhack A, ROCKETS – a novel one-for-all toolbox for light sheet microscopy in drug discovery, Frontiers in Immunology 14 (2023). (B08)

Mut J, Altmann S, Reising S, Meissner-Weigl J, Driessen MD, Ebert R, Seibel J, SiaNAl can be efficiently incorporated in glycoproteins of human mesenchymal stromal cells by metabolic glycoengineering, ACS Biomater Sci Eng doi:10.1021/acsbiomaterials.2c01534  (2023). (B05)

Pantawane S, Mueller S, Gekle S, Effect of particle insertion on Poly(3-hexylthiophene) brush’s π-π stacking, Computational Materials Science 226 (2023). (B07)

Peters G, Jakubass B, Weidenfeller K, Kniesburges S, Bohringer D, Wendler O, Mueller SK, Gostian AO, Berry DA, Dollinger M, Semmler M, Synthetic mucus for an ex vivo phonation setup: Creation, application, and effect on excised porcine larynges, J Acoust Soc Am 152(6) (2022) 3245. (A01)

Polley C, Distler T, Scheufler C, Detsch R, Lund H, Springer A, Schneidereit D, Friedrich O, Boccaccini AR, Seitz H, 3D printing of piezoelectric and bioactive barium titanate-bioactive glass scaffolds for bone tissue engineering, Materials Today Bio doi:10.1016/j.mtbio.2023.100719  (2023). (Z02)

Rockel AF, Wagner N, Spenger P, Ergun S, Worsdorfer P, Neuro-mesodermal assembloids recapitulate aspects of peripheral nervous system development in vitro, Stem Cell Reports doi:10.1016/j.stemcr.2023.03.012  (2023). (B04)

Roshanbinfar K, Kolesnik-Gray M, Angeloni M, Schruefer S, Fiedler M, Schubert DW, Ferrazzi F, Krstic V, Engel FB, Collagen Hydrogel Containing Polyethylenimine-Gold Nanoparticles for Drug Release and Enhanced Beating Properties of Engineered Cardiac Tissues, Adv Healthc Mater doi:10.1002/adhm.202202408  (2023) e2202408. (C01)

Schaefer N, Andrade Mier MS, Sonnleitner D, Murenu N, Ng XJ, Lamberger Z, Buechner M, Trossmann VT, Schubert DW, Scheibel T, Lang G, Rheological and Biological Impact of Printable PCL-Fibers as Reinforcing Fillers in Cell-Laden Spider-Silk Bio-Inks, Small Methods doi:10.1002/smtd.202201717  (2023) e2201717. (A07, C01, C05)

Schöbel L, Karakaya E, Detsch R, Boccaccini AR, Preparation of Compact Alginate Films for 2D in vitro Studies: Challenges and Strategies for Improvement, Materials Letters doi:10.1016/j.matlet.2023.134103  (2023). (A01, B06)

Schulik J, Salehi S, Boccaccini AR, Schrüfer S, Schubert DW, Arkudas A, Kengelbach-Weigand A, Horch RE, Schmid R, Comparison of the Behavior of 3D-Printed Endothelial Cells in Different Bioinks, Bioengineering 10(7) (2023). (C03, A07, C04, B03)

Sommer KP, Krolinski A, Mirkhalaf M, Zreiqat H, Friedrich O, Vielreicher M, Protocol for Cell Colonization and Comprehensive Monitoring of Osteogenic Differentiation in 3D Scaffolds Using Biochemical Assays and Multiphoton Imaging, International Journal of Molecular Sciences 24(3) (2023). (B08)

Sternstein C, Bohm TM, Fink J, Meyr J, Ludemann M, Krug M, Kriukov K, Gurdap CO, Sezgin E, Ebert R, Seibel J, Development of an Effective Functional Lipid Anchor for Membranes (FLAME) for the Bioorthogonal Modification of the Lipid Bilayer of Mesenchymal Stromal Cells, Bioconjug Chem doi:10.1021/acs.bioconjchem.3c00091  (2023). (B05)

Ter Mors B, Spieler V, Merino Asumendi E, Gantert B, Luhmann T, Meinel L, Bioresponsive Cytokine Delivery Responding to Matrix Metalloproteinases, ACS Biomater Sci Eng doi:10.1021/acsbiomaterials.2c01320  (2023). (B06)

Trossmann VT, Lentz S, Scheibel T, Factors Influencing Properties of Spider Silk Coatings and Their Interactions within a Biological Environment, Journal of Functional Biomaterials 14(8) (2023). (A08, C01)

Trossmann VT, Scheibel T, Design of Recombinant Spider Silk Proteins for Cell Type Specific Binding, Adv Healthc Mater 12(9) (2023) e2202660. (C01)

Unalan I, Schruefer S, Schubert DW, Boccaccini AR, 3D-Printed Multifunctional Hydrogels with Phytotherapeutic Properties: Development of Essential Oil-Incorporated ALG-XAN Hydrogels for Wound Healing Applications, ACS Biomater Sci Eng doi:10.1021/acsbiomaterials.3c00406  (2023). (A07)

Vaghela R, Arkudas A, Gage D, Korner C, von Horsten S, Salehi S, Horch RE, Hessenauer M, A Novel Window into Angiogenesis-Intravital Microscopy in the AV-Loop-Model, Cells 12(2) (2023). (B03, C03, C04)

Wörsdörfer P, Ergün S, “Organoids”: Insights from the First Issues, Organoids 2(2) (2023) 79-81. (B04)

Wolkersdorfer AM, Jugovic I, Scheller L, Gutmann M, Hahn L, Diessner J, Luhmann T, Meinel L, PEGylation of Human Vascular Endothelial Growth Factor, ACS Biomater Sci Eng doi:10.1021/acsbiomaterials.3c00253  (2023). (B06)

Publications 2022

An R, Strissel PL, Al-Abboodi M, Robering JW, Supachai R, Eckstein M, Peddi A, Hauck T, Bäuerle T, Boccaccini AR, Youssef A, Sun J, Strick R, Horch RE, Boos AM, Kengelbach-Weigand A, An Innovative Arteriovenous (AV) Loop Breast Cancer Model Tailored for Cancer Research, Bioengineering 9(7) (2022). (C03, B01, A01)

Apsite I, Salehi S, Ionov L, Materials for Smart Soft Actuator Systems, Chem Rev 122(1) (2022) 1349-1415. (B03)

Bednarzig V, Schrufer S, Schneider TC, Schubert DW, Detsch R, Boccaccini AR, Improved 3D Printing and Cell Biology Characterization of Inorganic-Filler Containing Alginate-Based Composites for Bone Regeneration: Particle Shape and Effective Surface Area Are the Dominant Factors for Printing Performance, Int J Mol Sci 23(9) (2022). (A07)

Beudert M, Gutmann M, Luhmann T, Meinel L, Fibrin Sealants: Challenges and Solutions, ACS Biomater Sci Eng doi:10.1021/acsbiomaterials.1c01437  (2022). (A03)

Beudert M, Hahn L, Horn AHC, Hauptstein N, Sticht H, Meinel L, Luxenhofer R, Gutmann M, Luhmann T, Merging bioresponsive release of insulin-like growth factor I with 3D printable thermogelling hydrogels, J Control Release 347 (2022) 115-126 (A03)

Bider F, Karakaya E, Mohn D, Aldo R, Boccaccini, Advantages of nanoscale bioactive glass as inorganic filler in alginate hydrogels for drug delivery and biofabrication, European Journal of Materials 2(1) (2022) 33-53. (B03)

Brand JS, Forster L, Bock T, Stahlhut P, Tessmar J, Groll J, Albrecht K, Covalently Cross-Linked Pig Gastric Mucin Hydrogels Prepared by Radical-Based Chain-Growth and Thiol-ene Mechanisms, Macromol Biosci 22(4) (2022) e2100274. (B07, A02, A06)

Ergün S, Wörsdörfer P, Organoids, Assembloids and Embryoids: New Avenues for Developmental Biology, Disease Modeling, Drug Testing and Toxicity Assessment without Animal Experimentation, Organoids 1(1) (2022) 37-40.

Ertekin O, Monavari M, Kruger R, Fuentes-Chandia M, Parma B, Letort G, Tripal P, Boccaccini AR, Bosserhoff AK, Ceppi P, Kappelmann-Fenzl M, Leal-Egana A, 3D hydrogel-based microcapsules as an in vitro model to study tumorigenicity, cell migration and drug resistance, Acta Biomater 142 (2022) 208-220. (C03)

Faber J, Hinrichsen J, Greiner A, Reiter N, Budday S, Tissue-Scale Biomechanical Testing of Brain Tissue for the Calibration of Nonlinear Material Models, Curr Protoc 2(4) (2022) e381. (B09)

Fischer L, Nosratlo M, Hast K, Karakaya E, Strohlein N, Esser T, Gerum RC, Richter S, Engel FB, Detsch R, Fabry B, Thievessen I, Calcium supplementation of bioinks reduces shear stress-induced cell damage during bioprinting, Biofabrication doi:10.1088/1758-5090/ac84af (2022). (A01, B06, C01, C02)

Gerum R, Mirzahossein E, Eroles M, Elsterer J, Mainka A, Bauer A, Sonntag S, Winterl A, Bartl J, Fischer L, Abuhattum S, Goswami R, Girardo S, Guck J, Schrufer S, Strohlein N, Nosratlo M, Herrmann H, Schultheis D, Rico F, Muller SJ, Gekle S, Fabry B, Viscoelastic properties of suspended cells measured with shear flow deformation cytometry, Elife 11 (2022). (A01, A07, B07)

Haag H, Sonnleitner D, Lang G, Dalton PD, Melt electrowriting to produce microfiber fragments, Polymers for Advanced Technologies doi:10.1002/pat.5641  (2022). (A04, A07)

Hauptstein J, Forster L, Nadernezhad A, Horder H, Stahlhut P, Groll J, Blunk T, Tessmar J, Bioink Platform Utilizing Dual-Stage Crosslinking of Hyaluronic Acid Tailored for Chondrogenic Differentiation of Mesenchymal Stromal Cells, Macromol Biosci 22(2) (2022) e2100331. (A02, A06, B02, C02)

Hauptstein J, Forster L, Nadernezhad A, Groll J, Teßmar J, Blunk T, Tethered TGF-β1 in a Hyaluronic Acid-Based Bioink for Bioprinting Cartilaginous Tissues, International Journal of Molecular Sciences 23(2) (2022). (A02, A06, B02)

Hazur J, Endrizzi N, Schubert DW, Boccaccini AR, Fabry B, Stress relaxation amplitude of hydrogels determines migration, proliferation, and morphology of cells in 3-D culture, Biomater Sci, 10, 270-280  (2022). (A01, A07, C02)

Heid S, Becker K, Byun J, Biermann I, Neščáková Z, Zhu H, Groll J, Boccaccini AR, Bioprinting with bioactive alginate dialdehyde-gelatin (ADA-GEL) composite bioinks: Time-dependent in-situ crosslinking via addition of calcium-silicate particles tunes in vitro stability of 3D bioprinted constructs, Bioprinting doi:10.1016/j.bprint.2022.e00200  (2022). (B03, A01, A06)

Hu C, Ahmad T, Haider MS, Hahn L, Stahlhut P, Groll J, Luxenhofer R, A thermogelling organic-inorganic hybrid hydrogel with excellent printability, shape fidelity and cytocompatibility for 3D bioprinting, Biofabrication 14(2) (2022). (A03)

Janzen D, Bakirci E, Faber J, Mier MA, Hauptstein J, Pal A, Forster L, Hazur J, Boccaccini AR, Detsch R, Tessmar J, Budday S, Blunk T, Dalton PD, Villmann C, Reinforced Hyaluronic acid-based Matrices promote 3D Neuronal Network Formation, Adv Healthc Mater doi:10.1002/adhm.202201826  (2022) e2201826. (A01, A02, B06, B09, B01/C05)

Kara A, Distler T, Polley C, Schneidereit D, Seitz H, Friedrich O, Tihminlioglu F, Boccaccini AR, 3D printed gelatin/decellularized bone composite scaffolds for bone tissue engineering: Fabrication, characterization and cytocompatibility study, Materials Today Bio 15 (2022). (B08, Z02)

Karakaya E, Bider F, Frank A, Teßmar J, Schöbel L, Forster L, Schrüfer S, Schmidt H-W, Schubert DW, Blaeser A, Boccaccini AR, Detsch R, Targeted Printing of Cells: Evaluation of ADA-PEG Bioinks for Drop on Demand Approaches, Gels 8(4) (2022). (B06, A02, A04, A07)

Kitana W, Apsite I, Hazur J, Boccaccini AR, Ionov L, 4D Biofabrication of T‐Shaped Vascular Bifurcation, Advanced Materials Technologies doi:10.1002/admt.202200429  (2022). (A01, A08)

Kleefeldt F, Upcin B, Bommel H, Schulz C, Eckner G, Allmanritter J, Bauer J, Braunger B, Rueckschloss U, Ergun S, Bone marrow-independent adventitial macrophage progenitor cells contribute to angiogenesis, Cell Death Dis 13(3) (2022) 220. (B04)

Kratzer S, Arkudas A, Himmler M, Schubert DW, Schneidereit D, Bauer J, Friedrich O, Horch RE, Cai A, Vascularization of Poly-epsilon-Caprolactone-Collagen I-Nanofibers with or without Sacrificial Fibers in the Neurotized Arteriovenous Loop Model, Cells 11(23) (2022). (Z02)

Lang G, Sonnleitner D, Biomimetic Protein‑based Elastomers – Processing and Properties of regenerated B. mori silk and recombinant spider silk fibers, Royal Society of Chemistry (2022). (A07)

Lechner A, Trossmann VT, Scheibel T, Impact of Cell Loading of Recombinant Spider Silk Based Bioinks on Gelation and Printability, Macromol Biosci 22(3) (2022) e2100390. (C01)

Lentz S, Trossmann VT, Borkner CB, Beyersdorfer V, Rottmar M, Scheibel T, Structure-Property Relationship Based on the Amino Acid Composition of Recombinant Spider Silk Proteins for Potential Biomedical Applications, ACS Appl Mater Interfaces doi:10.1021/acsami.2c09590  (2022). (C01)

Lentz S, Trossmann VT, Scheibel T, Selective Topography Directed Cell Adhesion on Spider Silk Surfaces, Advanced Materials Interfaces doi:10.1002/admi.202201936  (2022). (C01)

Mair V, Paulus I, Groll J, Ryma M, Freeform printing of thermoresponsive poly(2-cyclopropyl-oxazoline) as cytocompatible and on-demand dissolving template of hollow channel networks in cell-laden hydrogels, Biofabrication doi:10.1088/1758-5090/ac57a7  (2022). (B02)

Martinez-Sanchez LDC, Ngo PA, Pradhan R, Becker LS, Boehringer D, Soteriou D, Kubankova M, Schweitzer C, Koch T, Thonn V, Erkert L, Stolzer I, Gunther C, Becker C, Weigmann B, Klewer M, Daniel C, Amann K, Tenzer S, Atreya R, Bergo M, Brakebusch C, Watson AJM, Guck J, Fabry B, Atreya I, Neurath MF, Lopez-Posadas R, Epithelial RAC1-dependent cytoskeleton dynamics controls cell mechanics, cell shedding and barrier integrity in intestinal inflammation, Gut doi:10.1136/gutjnl-2021-325520  (2022). (A01)

Mehnert M, Faber J, Hossain M, Chester SA, Steinmann P, Experimental and numerical investigation of the electro-mechanical response of particle filled elastomers – Part I: Experimental investigations, European Journal of Mechanics – A/Solids 96 (2022). (B09)

Mehnert M, Faber J, Hossain M, Chester SA, Steinmann P, Experimental and numerical investigations of the electro-mechanical response of particle filled elastomers—Part II: Continuum modeling approach, European Journal of Mechanics – A/Solids 96 (2022). (B09)

Nadernezhad A, Groll J, Machine Learning Reveals a General Understanding of Printability in Formulations Based on Rheology Additives, Adv Sci (Weinh) doi:10.1002/advs.202202638  (2022) e2202638. (B04, A06)

Neubauer VJ, Hüter F, Wittmann J, Trossmann VT, Kleinschrodt C, Alber-Laukant B, Rieg F, Scheibel T, Flow Simulation and Gradient Printing of Fluorapatite- and Cell-Loaded Recombinant Spider Silk Hydrogels, Biomolecules 12(10) (2022). (C01)

Peters G, Jakubass B, Weidenfeller K, Kniesburges S, Bohringer D, Wendler O, Mueller SK, Gostian AO, Berry DA, Dollinger M, Semmler M, Synthetic mucus for an ex vivo phonation setup: Creation, application, and effect on excised porcine larynges, J Acoust Soc Am 152(6) (2022) 3245. (A01)

Pien N, Bartolf‐Kopp M, Parmentier L, Delaey J, De Vos L, Mantovani D, Van Vlierberghe S, Dubruel P, Jungst T, Melt Electrowriting of a Photo‐Crosslinkable Poly( ε ‐Caprolactone)‐Based Material into Tubular Constructs with Predefined Architecture and Tunable Mechanical Properties, Macromolecular Materials and Engineering doi:10.1002/mame.202200097  (2022). (Z01)

Ritter P, Cai A, Reischl B, Fiedler M, Prol G, Frie B, Kretzschmar E, Michael M, Hartmann K, Lesko C, Salti H, Arkudas A, Horch R, Paulsen F, Friedrich O, Haug M, MyoBio: An automated bioreactor system technology for standardized perfusion-decellularization of whole skeletal muscle, IEEE Trans Biomed Eng PP (2022). (B08, C04)

Ryma M, Genc H, Nadernezhad A, Paulus I, Schneidereit D, Friedrich O, Andelovic K, Lyer S, Alexiou C, Cicha I, Groll J, A print-and-fuse Strategy for Sacrificial Filaments Enables Biomimetically Structured Perfusable Microvascular Networks with Functional Endothelium Inside 3D Hydrogels, Adv Mater doi:10.1002/adma.202200653  (2022) e2200653. (B02, B08, A06)

Schaefer N, Harvey RJ, Villmann C, Startle Disease: New Molecular Insights into an Old Neurological Disorder, Neuroscientist doi:10.1177/10738584221104724  (2022) 10738584221104724. (B01, A07, C05)

Schmid R, Schmidt SK, Detsch R, Horder H, Blunk T, Schrufer S, Schubert DW, Fischer L, Thievessen I, Heltmann-Meyer S, Steiner D, Schneidereit D, Friedrich O, Gruneboom A, Amouei H, Wajant H, Horch RE, Bosserhoff AK, Arkudas A, Kengelbach-Weigand A, A New Printable Alginate/Hyaluronic Acid/Gelatin Hydrogel Suitable for Biofabrication of In Vitro and In Vivo Metastatic Melanoma Models, Advanced Functional Materials 32(2) (2022). (C03, A01, A07, B06, B08, C02, C04)

Schubert DW, Simple Model for the Spreading of Inks in Bioprinting-Revealing Relevant Scaling Laws-Part I Theory, Macromolecular Theory and Simulations 31(1) (2022). (A07)

Sivakumar S, Schmid R, Wieland A, Strissel PL, Strick R, Fischer L, Thievessen I, Kataev E, Arkudas A, Horch RE, Schubert DW, Kengelbach‐Weigand A, Role of Fiber Thickness and Surface Treatment of Electrospun Polycaprolactone Matrices on the Growth of Different Breast Cancer‐Associated Cells, Advanced Materials Interfaces doi:10.1002/admi.202101808  (2022). (B01,  B06,  C03)

Sörgel CA, Schmid R, Stadelmann N, Weisbach V, Distel L, Horch RE, Kengelbach-Weigand A, IGF-I and Hyaluronic Acid Mitigate the Negative Effect of Irradiation on Human Skin Keratinocytes, Cancers 14(3) (2022). (C03, C04)

Sporrer M, Kah D, Gerum RC, Reischl B, Huraskin D, Dessalles CA, Schneider W, Goldmann WH, Herrmann H, Thievessen I, Clemen CS, Friedrich O, Hashemolhosseini S, Schroder R, Fabry B, The desmin mutation R349P increases contractility and fragility of stem cell-generated muscle micro-tissues, Neuropathol Appl Neurobiol 48(3) (2022) e12784. (A01, B08, C02)

Steiner D, Reinhardt L, Fischer L, Popp V, Korner C, Geppert CI, Bauerle T, Horch RE, Arkudas A, Impact of Endothelial Progenitor Cells in the Vascularization of Osteogenic Scaffolds, Cells 11(6) (2022). (C04)

Trossmann VT, Heltmann-Meyer S, Amouei H, Wajant H, Horch RE, Steiner D, Scheibel T, Recombinant Spider Silk Bioinks for Continuous Protein Release by Encapsulated Producer Cells, Biomacromolecules doi:10.1021/acs.biomac.2c00971  (2022). (C01, C04)

Trossmann VT, Scheibel T, Design of Recombinant Spider Silk Proteins for Cell Type Specific Binding, Adv Healthc Mater doi:10.1002/adhm.202202660  (2022) e2202660. (C01)

Vaghela R, Arkudas A, Gage D, Korner C, von Horsten S, Salehi S, Horch RE, Hessenauer M, Microvascular development in the rat arteriovenous loop model in vivo-A step by step intravital microscopy analysis, J Biomed Mater Res A doi:10.1002/jbm.a.37395 (2022). (B03, C04)

Presentations 2022

Natascha Schäfer “Why do we need 3D neuronal tissue models? Looking beyond molecular pathomechanisms of rare diseases” Invited talk im Rahmen der Veranstaltung „GBM Luchtalk” der Gesellschaft für Biochemie und Molekularbiologie, 15.06.2022 (online) (A07)

Oliver Friedrich “Bioprinting of micro-vasculature for Tissue Engineering: Truth or Dare?” Invited Seminar presentation 31.08.2022 Victor Chang Cardiac Research Institute (VCCRI), Sydney, Australia (Z02)

Oliver Friedrich (zoom) “Tissue Regeneration 4.0 – ‘Rise of the Machines’” Invited Seminar presentation 05.07.2022 University Rostock, Fraunhofer IZI, HOGEMA lecture (Z02)

Ivana Jeremic, Julian Bauer, Joachim Schenk, Oliver Friedrich, Matthias Weiss, Katrin Heinze “SFB/TRR 225 Project Z02: Quantitative imaging and analysis of biofabricate quality and maturation”   Symposium “Biofabrication meets Infection” Würzburg on 25-28- September 2022 (Z02)

Jurgen Groll “CRC225 “Biofabrication”: 4 years of large scale integrated biofabrication research in Germany” Meeting of The International Society for Biofabrication 2022, Montecatini Terme (Italy) on 25-28- September 2022 https://www.biofabrication2022.org/ (A06, B02, B04)

Leonid Ionov “Possibilities and limitations of 4D biofabrication” (Keynote) Meeting of The International Society for Biofabrication 2022, Montecatini Terme (Italy) on 25-28- September 2022 https://www.biofabrication2022.org/ (A08)

Matthias Ryma “Generation of Perfusable Microvascular Networks for 3D-Tissue Models via Sacrificial Thermoresponsive Poly(2-oxazoline)s” Meeting of The International Society for Biofabrication 2022, Montecatini Terme (Italy) on 25-28- September 2022 https://www.biofabrication2022.org/ (B02)

Sven Heilig “Adaption of perfusable microvascular networks with functional endothelium from rocking perfusion to biomimetic monodirectional perfusion” Meeting of The International Society for Biofabrication 2022, Montecatini Terme (Italy) on 25-28- September 2022 https://www.biofabrication2022.org/ (B02)

Heid Susanne “ADA-GEL-BIF composite bioinks: Development, characterization, rheological modelling, 3D bioprinting and dynamic perfusion in an inline printed bioreactor” Meeting of The International Society for Biofabrication 2022, Montecatini Terme (Italy) on 25-28- September 2022 https://www.biofabrication2022.org/ (B03)

Sahar Salehi-Müller “Hydrogel-based biomimetic films for corneal stroma engineering” Sicca Förderpreise, DOG Congress, Berlin, 29.09-02.10.2022 (B03)

Sahar Salehi, K.S. Koeck, Martin Humenik, Thomas Scheibel “Continuous non-crosslinked collagen fibers as building blocks of the musculotendinous junction”  Materials Science and Engineering MSE congress 27-29 September 2022 Darmstadt (B03, C01, A08)

Ruben Gerrit Scheuring “Mind the Process – How to Boost Reproducibility, Precision & Printing Time of Gelatin-based Bioinks”  Meeting of The International Society for Biofabrication 2022, Montecatini Terme (Italy) on 25-28- September 2022 https://www.biofabrication2022.org/ (B04)

Regina Ebert “Bone marrow mesenchymal stromal cells: good or bad guys?” ACHILLES Retreat Würzburg, 25.03.2022 (B05)

Rainer Detsch “Processing and chemical modifications of alginate-based bioinks for DoD applications” Meeting of The International Society for Biofabrication 2022, Montecatini Terme (Italy) on 25-28- September 2022 https://www.biofabrication2022.org/ (B06)

Stephan Gekle “Predicting cell stress and deformation at the exit of a printing needle” Meeting of The International Society for Biofabrication 2022, Montecatini Terme on 25-28- September 2022 https://www.biofabrication2022.org/ (B07)

Tomasz Jungst “Developing tissue models to study vascular diseases” Meeting of The International Society for Biofabrication 2022, Montecatini Terme (Italy) on 25-28- September 2022 https://www.biofabrication2022.org/ (B09)

Jessica Faber “Tissue-scale biomechanical testing of brain tissue for the calibration of nonlinear material models” GAMM 2022 – 92nd GAMM Annual Meeting of the International Association of Applied Mathematics and Mechanics (B09)

Felix Engel “3D-bioprinting of functional human cardiac ventricles using a collagen-based bioink” Meeting of The International Society for Biofabrication 2022, Montecatini Terme (Italy) on 25-28- September 2022 https://www.biofabrication2022.org/ (C01)

Dieter Janzen, Ezgi Bakirci, Leonard Forster, Jörg Teßmar, Paul D. Dalton, Carmen Villmann ” Neuronal network formation in 3D reinforced hyaluronic-based hydrogels using MEW frames” 6th Bioinspired Materials, Kloster Kostenz 2022 (C05, A02)

Thomas Scheibel, Invited speaker: Bioproscale, Berlin, 29.03.2022 (A08, C01)

Thomas Scheibel, Invited speaker: 3DMM2O, Schöntal Monastry, 07.04.2022 (A08, C01)

Thomas Scheibel, Invited speaker: ASBTE, Melbourne, 20.04.2022 (A08, C01)

Thomas Scheibel, Invited speaker: ICRI-BioM lecture, 10.06.2022 (A08, C01)

Thomas Scheibel, Invited speaker: CIMTEC, Perugia 22.06.2022 (A08, C01)

Thomas Scheibel, Invited speaker: Bioinspired Materials Andermatt, 09.08.2022 (A08, C01)

Thomas Scheibel, Invited speaker: Monash Biofabrication lecture, 25.08.2022 (A08, C01)

Thomas Scheibel, Invited speaker: CRC 1459 Summer School Biofabrication, 19.09.2022 (A08, C01)

Thomas Scheibel, Invited speaker: 3rd International Workshop on Insect Bio-inspired Technologies 18.11.2022 (A08, C01)

Ruben Gerrit Scheuring “Mind the Process – How to Boost Reproducibility, Precision & Printing Time of Gelatin-based Bioinks” Meeting of The International Society for Biofabrication 2022, Montecatini Terme (Italy) on 25-28- September 2022 https://www.biofabrication2022.org/ (B04)

Sonja K. Schmidt, Melanie Kappelmann-Fenzl, Stefan Fischer, Rafael Schmid, Andreas Arkudas, Annika Kengelbach-Weigand, Anja K. Bosserhoff “Molecular analysis of tumor dormancy in a 3D printed melanoma model” 19th International Congress of the Society for Melanoma Research https://smrcongress.org/ (C03)

Poster 2022

Nicoletta Murenu, Impact of Dumbbell shaped nanofibers on cells behaviour #93, EUREKA!, Würzburg (Germany) on 5-6 October 2022, A07

David Böhringer, Lars Bischof, Tina Czerwinski, Mar Cóndor, Sibel Kara, Anja Lux, Silvia Budday, Richard Gerum, Ben Fabry, Christoph Mark   SFB/TRR 225 Project A01: Traction forces of migrating immune cells       Symposium “Biofabrication meets Infection” Würzburg on 25-28- September 2022  A01

Joerg Teßmar    Dual-Stage Crosslinking HA-based Bioink Platform for Bioprinting Advanced Cartilaginous Tissues B&B_057             Meeting of The International Society for Biofabrication 2022, Montecatini Terme (Italy) on 25-28- September 2022 https://www.biofabrication2022.org/ A02

Paula Büttner, Jeanette Weigelt, Torsten Blunk, Jörg Teßmar      SFB/TRR 225 Project A02: Hyaluronic acid based bioink platform with multi-funcitonal crosslinkers for the controlled differentiation of MSC      Symposium “Biofabrication meets Infection” Würzburg on 25-28- September 2022  A02

Raphael Lohse, Robin Dai, Hatice Genc, Leonard Forster, Joerg Tessmar, Iwona Cicha     Development of experimental set-up for embedding human endothelial cells and fibroblasts in thiolated hyaluronic acid hydrogels      Meeting of The International Society for Biofabrication 2022, Montecatini Terme (Italy) on 25-28- September 2022 https://www.biofabrication2022.org/   A02, B02

Sophia Löffelsend           SFB/TRR 225 Project A06: Cell-Loaded Microgels as Mechanical Protection and Controlled Microenvironment for Cells in Bioinks    Symposium “Biofabrication meets Infection” Würzburg on 25-28- September 2022      A06

Stefan Schrüfer, Vera Bednarzig , T. C. Schneider, Dirk W. Schubert, Rainer Detsch, Aldo R. Boccaccini  Improving 3D printability of inorganic-filler containing alginate based bio ink composites: Influence of filler activity and specific surface area       Nordic Polyer Days 2022, 01.06-03.06.2022. Poster Prize              A07

Zan Lamberger, Christina Heinritz, K. Kocourková, H. Bargel, A. Minařík, Martin Humenik             Microstructuring of DNA Functionalized Fibrous Networks for Spatially Controlled Cell Attachment                 A07

Gregor Lang       Composite Bio-Inks: Multi-Tasking Biofabrication B&B_037          Meeting of The International Society for Biofabrication 2022, Montecatini Terme (Italy) on 25-28- September 2022 https://www.biofabrication2022.org/                A07

Nicoletta Murenu            Dumbbell shaped nanofibers induce changes in cell Characteristics B&B_047      Meeting of The International Society for Biofabrication 2022, Montecatini Terme (Italy) on 25-28- September 2022 https://www.biofabrication2022.org/   A07

Zan Lamberger Microstructuring of DNA Functionalized Fibrous Networks for Spatially Controlled Cell Attachment IVM_045             Meeting of The International Society for Biofabrication 2022, Montecatini Terme (Italy) on 25-28- September 2022 https://www.biofabrication2022.org/ A07

Zan Lamberger, Nicoletta Murenu, Margitta Büchner, Gregor Lang, Natascha Schäfer, Dirk Schubert       SFB/TRR 225 Project A07: Influence of anisotropic fiber-reinforcement on cell behavior and printability of bioinks      Symposium “Biofabrication meets Infection” Würzburg on 25-28- September 2022  A07

Margitta Büchner            Development of a Capillary Rheometer for Characterization of Bioinks during 3D Bioprinting NTB_045             Meeting of The International Society for Biofabrication 2022, Montecatini Terme (Italy) on 25-28- September 2022 https://www.biofabrication2022.org/ A07

Saskia Roth, Christina Heinritz, Leonid Ionov, Thomas Scheibel  SFB/TRR 225 Project A08: Vascular supply for 3D tissue based on shape-changing polymers and recombinant spider silk               Symposium “Biofabrication meets Infection” Würzburg on 25-28- September 2022     A08

Robin Dai, Sven Heilig, Hatice Genc, Matthias Ryma, Iwona Cicha, Jürgen Groll   Development of experimental set-up for embedding human endothelial cells and fibroblasts in thiolated hyaluronic acid Hydrogels B&B_041        Meeting of The International Society for Biofabrication 2022, Montecatini Terme (Italy) on 25-28- September 2022 https://www.biofabrication2022.org/ B02

Robin Dai, Sven Heilig, Hatice Genc, Matthias Ryma, Iwona Cicha, Jürgen Groll   SFB/TRR 225 Project B02: Endothelialized perfusable microvascular networks for biofabrication of standardised in vitro tissue models                Symposium “Biofabrication meets Infection” Würzburg on 25-28- September 2022         B02

Raphael Lohse, Robin Dai, Hatice Genc, Leonard Forster, Joerg Tessmar, Iwona Cicha     Development of experimental set-up for embedding human endothelial cells and fibroblasts in thiolated hyaluronic acid hydrogels      Meeting of The International Society for Biofabrication 2022, Montecatini Terme (Italy) on 25-28- September 2022 https://www.biofabrication2022.org/   A02, B02

Johann Schorzmann, Lys Sprenger, Hsuan-Heng Lu, Sahar Salehi, Aldo Boccaccini, Frank Döpper               SFB/TRR 225 Project B03: Printing of biofabricates and customized bioreactors for skeletal muscle tissue (B03)            Symposium “Biofabrication meets Infection” Würzburg on 25-28- September 2022  B03

Hsuan-Heng Lu , Aldo R. Boccaccini         Advances in the design of composite inks based on ADA-GEL and bioactive inorganic fillers  Meeting of The International Society for Biofabrication 2022, Montecatini Terme (Italy) on 25-28- September 2022 https://www.biofabrication2022.org/ B03

Hsuan-Heng Lu Advances in the design of composite bioinks based on ADA- GEL and bioactive inorganic fillers B&B_036             Meeting of The International Society for Biofabrication 2022, Montecatini Terme (Italy) on 25-28- September 2022 https://www.biofabrication2022.org/ B03

Nathaly Chicaiza Cabezas, Leyla Dogan, Ruben Scheuring1, Philipp Wörsdörfer, Jürgen Groll, Süleyman Ergün                SFB/TRR 225 Project B04: 3D Bioprinting of Vascular Structures using Vascular Wall-Resident Stem Cells and Human iPSC-derived Multipotent Progenitor Cells           Symposium “Biofabrication meets Infection” Würzburg on 25-28- September 2022       B04

Leyla Dogan       3D Bioprinting of Vascular Structures using Vascular Wall-Resident Stem Cells and Human iPSC-derived Multipotent Progenitor Cells NTB_050   Meeting of The International Society for Biofabrication 2022, Montecatini Terme (Italy) on 25-28- September 2022 https://www.biofabrication2022.org/ B04

Marcel Groß1    SFB/TRR 225 Project B05: Membrane engineering as a tool to control the behaviour of mesenchymal stem cells in biofabrication processes    Meeting of The International Society for Biofabrication 2022, Montecatini Terme (Italy) on 25-28- September 2022 https://www.biofabrication2022.org/ B05

Kirilo Krjukov, Marcel Groß, Stephan Altmann, Denitsa Docheva, Jürgen Mut, Jürgen Seibel, Regina Ebert            Glycoengineering as a tool to control the behavior of mesenchymal stromal cells in biofabrication process                Achilles conference, 25-27.05.2022         B05

Kirilo Krjukov     Glycoengineering as a tool to control the behavior of mesenchymal stromal cells in biofabrication processes NTB_059                        B05

Kirilo Krjukov, Stephan Altmann, Marcel Groß, Jürgen Mut, Jürgen Seibel, Regina Ebert Membrane-Engineering as a Tool to Control the Behavior of Mesenchymal Stem Cells in Biofabrication Processes     Meeting of The International Society for Biofabrication 2022, Montecatini Terme (Italy) on 25-28- September 2022 https://www.biofabrication2022.org/   B05

Kirilo Krjukov, Stephan Altmann, Marcel Groß, Jürgen Mut, Jürgen Seibel, Regina Ebert Membrane-Engineering as a Tool to Control the Behavior of Mesenchymal Stem Cells in Biofabrication Processes     Symposium “Biofabrication meets Infection” Würzburg on 25-28- September 2022  B05

Kirilo Krjukov, Stephan Altmann, Marcel Groß, Jürgen Mut, Jürgen Seibel, Regina Ebert Glycoengineering as a Tool to Control the Behavior of Mesenchymal Stem Cells in Biofabrication Processes     Final Achilles Conference, Guimaraes, Portugal 25.-27.05.22     B05

Mateo Andrade Mier, Carmen Villmann, Reiner Strick, Anna Reinert, Esra Türker              SFB/TRR 225 Project B06: Reporter-conjugated Alginate dialdehyde (ADA) to investigate cell metabolism in biofabrication               Symposium “Biofabrication meets Infection” Würzburg on 25-28- September 2022  B06

Rainer Detsch, Emine Karakaya, Aldo R. Boccaccini           Multiple hydrogel constructs engineering for the use in biofabrication approaches          Annual Conference of the German Society for Biomaterials (DGBM); September 15 to 17, 2022 (Essen, Germany)         B06

 

Katinka Theis, Steffen Trippmacher, Richard Kellnberger, Krystyna Albrecht, Georg Papastavrou, Stephan Gekle                SFB/TRR 225 Project B07: Mechanically defined sensor particles for bioprinting Symposium “Biofabrication meets Infection” Würzburg on 25-28- September 2022  B07

Richard Kellnberger, F. Häusl, M. Lehmann, Stephan Gekle         Modelling internal cell structure for bioprinting processes           DPG       B07

Katinka Theis     Mechanosensitive sensor particles for bioprinting processes NTB_037   Meeting of The International Society for Biofabrication 2022, Montecatini Terme (Italy) on 25-28- September 2022 https://www.biofabrication2022.org/   B07

Jessica Faber, Florian Hofmann, Silvia Budday, Tomasz Jüngst    SFB/TRR 225 Project B09: Biofabricated gradients for functional tissue models              Symposium “Biofabrication meets Infection” Würzburg on 25-28- September 2022                B09

Florian Hofmann              Microfluidic printheads for multi-material mixing NTB_058         Meeting of The International Society for Biofabrication 2022, Montecatini Terme (Italy) on 25-28- September 2022 https://www.biofabrication2022.org/   B09

Jessica Faber, Florian Hofmann, Silvia Budday, Tomasz Jüngst    SFB/TRR 225 Project C01: Recombinant spider-silk-based hydrogels for cardiac tissue engineering  Meeting of The International Society for Biofabrication 2022, Montecatini Terme (Italy) on 25-28- September 2022 https://www.biofabrication2022.org/       C01

Tilman U. Esser, Xuen J. Ng, Vanessa Trossmann, Felix B. Engel, Thomas Scheibel             SFB/TRR 225 Project C02: Biofabrication of 3D models for functional investigations of stromal parameters affecting the behaviour of breast cancer cells        Symposium “Biofabrication meets Infection” Würzburg on 25-28- September 2022          C02

Sabrina Stecher, Thabang Matseke, Hannes Horder, David Böhringer, Franziska Dusi, Petra Bauer-Kreisel, Ben Fabry, Torsten Blunk    SFB/TRR 225 Project C02: Interleukin-2 stimulated natural killer cells fail to respond to chemoattractants           Symposium “Biofabrication meets Infection” Würzburg on 25-28- September 2022         C02

Hannes Horder 3D Bioprinted Co-Culture Models to Investigate Breast Cancer-Adipose Tissue Interactions IVM_047                Meeting of The International Society for Biofabrication 2022, Montecatini Terme (Italy) on 25-28- September 2022 https://www.biofabrication2022.org/        C02

Thabang Matseke, Tina Czerwinski, David Boehringer, Christoph Mark, Caroline Bosch-Voskens, Ben Fabry                SFB/TRR 225 Project C03: Analysis of tumor dormancy and progression in biofabricated vascularized 3D models Symposium “Biofabrication meets Infection” Würzburg on 25-28- September 2022         C03

Evelin Sandor, Tannaz Karimi, Carolin Eckert, Andreas Arkudas, Anja Bosserhoff, Rafael Schmid, Sonja Schmidt, Annika Kengelbach-Weigand    SFB/TRR 225 Project C04: Biofabrication of cellularized and by the AV loop vascularized tissue container for the transplantation of cells producing therapeutic proteins             Symposium “Biofabrication meets Infection” Würzburg on 25-28- September 2022               C03

Sonja K. Schmidt, Melanie Kappelmann-Fenzl, Stefan Fischer, Rafael Schmid, Andreas Arkudas, Annika Kengelbach-Weigand, Anja K. Bosserhoff      Molekulare Analyse der Tumor Dormancy des malignen Melanoms im 3D-gedruckten Modell ADO Hautkrebs Kongress 2022, Hannover https://www.ado-kongress.de/           C03

Sonja K. Schmidt, Melanie Kappelmann-Fenzl, Stefan Fischer, Rafael Schmid, Andreas Arkudas, Annika Kengelbach-Weigand, Anja K. Bosserhoff      Molecular analysis of tumor dormancy in a 3D printed melanoma model              19th International Congress of the Society for Melanoma Research https://smrcongress.org/              C03

Rafael Schmid, Sonja K. Schmidt, Rainer Detsch, Hannes Horder, Torsten Blunk, Stefan Schrüfer, Dirk W. Schubert, Lena Fischer, Ingo Thievessen, Stefanie Heltmann-Meyer, Dominik Steiner, Dominik Schneidereit, Oliver Friedrich, Anika Grüneboom, Hanna Amouei, Harald Wajant, Raymund E. Horch, Anja K. Bosserhoff, Andreas Arkudas, Annika Kengelbach-Weigand    A New Printable Alginate/Hyaluronic Acid/Gelatin Hydrogel Suitable for Biofabrication of In Vitro and In Vivo Metastatic Melanoma Models TERMIS EU 2022               C03 and A01, A07, B06, B08, C02, C04

Raymund Horch, Harald Wajant, Isabell Lang, Yvonne Kulicke     SFB/TRR 225 Project C05: Ultraweak hydrogels for molecular and biological functional analyses of cell-matrix and cell-cell 3D networks in neuronal cell culture systems                Symposium “Biofabrication meets Infection” Würzburg on 25-28- September 2022         C05

Mateo Andrade Mier     Scaffold design and matrix composition affect the cellular morphology of native glial cells and glioma cells IVM_008     Meeting of The International Society for Biofabrication 2022, Montecatini Terme (Italy) on 25-28- September 2022 https://www.biofabrication2022.org/         C05

Camilla Mussoni, Anna Laptii, Janina Müller-Deile, Taufiq Ahmad             SFB/TRR 225 Project C06: Biofabrication of a glomerular ex vivo model by stepwise mimicking functional core components   Symposium “Biofabrication meets Infection” Würzburg on 25-28- September 2022               C06

Camilla Mussoni, Anna Laptii, Janina Müller-Deile, Taufiq Ahmad             Fabrication of an in-vivo model of the Glomerular Filtration Barrier      Meeting of The International Society for Biofabrication 2022, Montecatini Terme (Italy) on 25-28- September 2022 https://www.biofabrication2022.org/               C06

Camilla Mussoni               Fabrication of an in vitro model of the glomerular filtration barrier IVM_071      Meeting of The International Society for Biofabrication 2022, Montecatini Terme (Italy) on 25-28- September 2022 https://www.biofabrication2022.org/   C06

Julian Bauer, Ivana Jeremic, Joachim Schenk       SFB/TRR225 Project Z02: Quantitative imaging and analysis of biofabricate quality and maturation        Symposium “Biofabrication meets Infection” Würzburg on 25-28- September 2022      Z02

Julian Bauer, Ivana Jeremic, Joachim Schenk, Oliver Friedrich, Matthias Weiss, Katrin Heinze      SFB/TRR 225 Project Z02: Quantitative imaging and analysis of biofabricate quality and maturation   Symposium “Biofabrication meets Infection” Würzburg on 25-28- September 2022               Z02

Publications 2021

Altmann S, Mut J, Wolf N, Meissner-Weigl J, Rudert M, Jakob F, Gutmann M, Luhmann T, Seibel J, Ebert R, Metabolic Glycoengineering in hMSC-TERT as a Model for Skeletal Precursors by Using Modified Azide/Alkyne Monosaccharides, Int. J. Mol. Sci. 22(6) (2021) 2820. (B05, A03)

Apsite I, Salehi S, Ionov L, Materials for Smart Soft Actuator Systems, Chem Rev doi:10.1021/acs.chemrev.1c00453  (2021). (B03)

Bächer C, Graessel K, Gekle S, Rayleigh–Plateau instability of anisotropic interfaces. Part 2. Limited instability of elastic interfaces, J. Fluid Mech. 910 (2021) A47. (B07)

Bauer A, Prechova M, Fischer L, Thievessen I, Gregor M, Fabry B, pyTFM: A tool for traction force and monolayer stress microscopy, PLoS Comput Biol 17(6) (2021) e1008364. (A01, B06)

Bednarzig V, Karakaya E, Egana AL, Teßmar J, Boccaccini AR, Detsch R, Advanced ADA-GEL bioink for bioprinted artificial cancer models, Bioprinting doi:10.1016/j.bprint.2021.e00145  (2021) 00145. (B06, A01, A02)

Blum C, Taskin MB, Shan J, Schilling T, Schlegelmilch K, Tessmar J, Groll J, Appreciating the First Line of the Human Innate Immune Defense: A Strategy to Model and Alleviate the Neutrophil Elastase-Mediated Attack toward Bioactivated Biomaterials, Small 17(13) (2021) 2007551. (A06, A02)

Brand JS, Forster L, Bock T, Stahlhut P, Tessmar J, Groll J, Albrecht K, Covalently Crosslinked Pig Gastric Mucin Hydrogels Prepared by Radical-based Chain-Growth and Thiol-ene Mechanisms, Macromol Biosci doi:10.1002/mabi.202100274  (2021) e2100274. (B07, A02, A06)

Cai FF, Heid S, Boccaccini AR, Potential of Laponite(R) incorporated oxidized alginate-gelatin (ADA-GEL) composite hydrogels for extrusion-based 3D printing, J. Biomed. Mater. Res., Part B doi:10.1002/jbm.b.34771  (2021) 1 – 15. (B03)

Constante G, Apsite I, Alkhamis H, Dulle M, Schwarzer M, Caspari A, Synytska A, Salehi S, Ionov L, 4D Biofabrication Using a Combination of 3D Printing and Melt-Electrowriting of Shape-Morphing Polymers, ACS Appl Mater Interfaces 13(11) (2021) 12767-12776. (B03)

Distler T, Kretzschmar L, Schneidereit D, Girardo S, Goswami R, Friedrich O, Detsch R, Guck J, Boccaccini AR, Budday S, Mechanical properties of cell- and microgel bead-laden oxidized alginate-gelatin hydrogels, Biomater. Sci. 9(8) (2021) 3051-3068. (B06, B08)

Distler T, Polley C, Shi F, Schneidereit D, Ashton MD, Friedrich O, Kolb JF, Hardy JG, Detsch R, Seitz H, Boccaccini AR, Electrically Conductive and 3D-Printable Oxidized Alginate-Gelatin Polypyrrole:PSS Hydrogels for Tissue Engineering, Adv Healthc Mater 10 (2021) 2001876. (B08)

Dogan L, Scheuring R, Wagner N, Ueda Y, Wörsdörfer P, Groll J, Ergün S, Human iPSC-derived mesodermal progenitor cells preserve their vasculogenesis potential after extrusion and form hierarchically organized blood vessels, Biofabrication 13(4)  (2021). (B04)

Esser TU, Trossmann VT, Lentz S, Engel FB, Scheibel T, Designing of spider silk proteins for hiPSC-based cardiac tissue engineering, Mater Today Bio doi:10.1016/j.mtbio.2021.100114  (2021). (C01)

Farasatkia A, Kharaziha M, Ashrafizadeh F, Salehi S, Transparent silk/gelatin methacrylate (GelMA) fibrillar film for corneal regeneration, Mater Sci Eng C Mater Biol Appl 120 (2021) 111744. (B03)

Fischhaber N, Faber J, Bakirci E, Dalton PD, Budday S, Villmann C, Schaefer N, Spinal Cord Neuronal Network Formation in a 3D Printed Reinforced Matrix-A Model System to Study Disease Mechanisms, Adv Healthc Mater doi:10.1002/adhm.202100830  (2021) e2100830. (B01, Z01)

Förster S, Groll J, Reineke B, Hauschild S, Paulus I, Hazur J, Vollmer M, Tamgüney G, Boccacini A, On-chip-fabrication-and-in-flow-3d-printing-of-cell-laden-microgel-constructs-from-chip-to-scaffold-materials-in-one-integral-process, doi:10.26434/chemrxiv.14564508.v1  (2021). (A06)

Friedrich RP, Cicha I, Alexiou C, Iron Oxide Nanoparticles in Regenerative Medicine and Tissue Engineering, Nanomaterials 11(9) (2021). (B02)

Fuentes-Chandia M, Vierling A, Kappelmann-Fenzl M, Monavari M, Letort G, Hone L, Parma B, Antara SK, Ertekin O, Palmisano R, Dong M, Bopple K, Boccaccini AR, Ceppi P, Bosserhoff AK, Leal-Egana A, 3D Spheroids Versus 3D Tumor-Like Microcapsules: Confinement and Mechanical Stress May Lead to the Expression of Malignant Responses in Cancer Cells, Adv. Biol. doi:10.1002/adbi.202000349  (2021) 2000349. (C03, A01)

Genc H, Hazur J, Karakaya E, Dietel B, Bider F, Groll J, Alexiou C, Boccaccini AR, Detsch R, Cicha I, Differential Responses to Bioink-Induced Oxidative Stress in Endothelial Cells and Fibroblasts, Int. J. Mol. Sci. 22(5) (2021) 2358. (B02, A01, B06)

Hahn L, Beudert M, Gutmann M, Kessler L, Stahlhut P, Fischer L, Karakaya E, Lorson T, Thievessen I, Detsch R, Luhmann T, Luxenhofer R, From Thermogelling Hydrogels toward Functional Bioinks: Controlled Modification and Cytocompatible Crosslinking, Macromol. Biosci. doi:10.1002/mabi.202100122  (2021) e2100122. (A03, B06)

Hahn L, Keßler L, Polzin L, Fritze L, Forster S, Helten H, Luxenhofer R, ABA Type Amphiphiles with Poly(2‐benzhydryl‐2‐oxazine) Moieties: Synthesis, Characterization and Inverse Thermogelation, Macromol. Chem. Phys. doi:10.1002/macp.202100114  (2021). (A03)

Hahn L, Karakaya E, Zorn T, Sochor B, Maier M, Stahlhut P, Forster S, Fischer K, Seiffert S, Poppler AC, Detsch R, Luxenhofer R, An Inverse Thermogelling Bioink Based on an ABA-Type Poly(2-oxazoline) Amphiphile, Biomacromolecules doi:10.1021/acs.biomac.1c00427  (2021). (A03, B06)

Hahn L, Zorn T, Kehrein J, Kielholz T, Ziegler A-L, Forster S, Sochor B, Lisitsyna ES, Durandin N, Laaksonen T, Aseyev V, Sotriffer C, Windbergs M, Pöppler A-C, Luxenhofer R, Unravelling-a-novel-mechanism-in-polymer-self-assemblies-an-order-order-transition-based-on-molecular-interactions-between-hydrophilic-and-hydrophobic-polymer-blocks, doi:10.33774/chemrxiv-2021-mjd8n-v2  (2021). (A03)

Haider MS, Ahmad T, Yang M, Hu C, Hahn L, Stahlhut P, Groll J, Luxenhofer R, Tuning the Thermogelation and Rheology of Poly(2-Oxazoline)/Poly(2-Oxazine)s Based Thermosensitive Hydrogels for 3D Bioprinting, Gels 7(3) (2021). (A03)

Hasselmann S, Hahn L, Lorson T, Schatzlein E, Sebastien I, Beudert M, Luhmann T, Neubauer JC, Sextl G, Luxenhofer R, Heinrich D, Freeform direct laser writing of versatile topological 3D scaffolds enabled by intrinsic support hydrogel, Mater Horiz doi:10.1039/d1mh00925g (2021). (A03)

Hauptstein J, Forster L, Nadernezhad A, Horder H, Stahlhut P, Groll J, Blunk T, Teßmar J, Bioink Platform Utilizing Dual-stage Crosslinking of Hyaluronic Acid Tailored for Chondrogenic Differentiation of Mesenchymal Stromal Cells, Macromolecular Bioscience n/a(n/a)  2100331. (A02, A06, B02, C02)

Hazur J, Endrizzi N, Schubert DW, Boccaccini AR, Fabry B, Stress relaxation amplitude of hydrogels determines migration, proliferation, and morphology of cells in 3-D doi:10.1101/2021.07.08.451608  (2021). (A01, A07, C02)

Heltmann-Meyer S, Steiner D, Muller C, Schneidereit D, Friedrich O, Salehi S, Engel FB, Arkudas A, Horch RE, Gelatin methacryloyl is a slow degrading material allowing vascularization and long-term usein vivo, Biomed Mater 16(6) (2021). (B03, B08, C01, C04)

Hesselbarth R, Esser TU, Roshanbinfar K, Schrufer S, Schubert DW, Engel FB, CHIR99021 Promotes hiPSC-Derived Cardiomyocyte Proliferation in Engineered 3D Microtissues, Adv Healthc Mater doi:10.1002/adhm.202100926  (2021) e2100926. (C01, A07)

Hessenauer MET, Vaghela R, Korner C, von Horsten S, Pobel C, Gage D, Muller C, Salehi S, Horch RE, Arkudas A, Watching the vessels grow – establishment of intravital microscopy in the AV-loop rat model, Tissue Eng Part C Methods doi:10.1089/ten.TEC.2021.0024  (2021). (C04, B03)

Horder H, Guaza Lasheras M, Grummel N, Nadernezhad A, Herbig J, Ergun S, Tessmar J, Groll J, Fabry B, Bauer-Kreisel P, Blunk T, Bioprinting and Differentiation of Adipose-Derived Stromal Cell Spheroids for a 3D Breast Cancer-Adipose Tissue Model, Cells 10(4) (2021) 803. (C02, A02, B02, B04)

Horvat S, Yu Y, Manz H, Keller T, Beilhack A, Groll J, Albrecht K, Nanogels as Antifungal‐Drug Delivery System Against Aspergillus Fumigatus, Advanced NanoBiomed Research 1(5) (2021) 2000060. (B07, B08)

Hu C, Hahn L, Yang MS, Altmann A, Stahlhut P, Groll J, Luxenhofer R, Improving printability of a thermoresponsive hydrogel biomaterial ink by nanoclay addition, J. Mater. Sci. 56(1) (2021) 691-705. (A03)

Hu C, Haider MS, Hahn L, Yang M, Luxenhofer R, Development of a 3D printable and highly stretchable ternary organic-inorganic nanocomposite hydrogel, J Mater Chem B 9(22) (2021) 4535-4545. (A03)

Kah D, Winterl A, Přechová M, Schöler U, Schneider W, Friedrich O, Gregor M, Fabry B, A low-cost uniaxial cell stretcher for six parallel wells, HardwareX 9 (2021). (A01, B08, C02)

Kahl M, Schneidereit D, Bock N, Friedrich O, Hutmacher DW, Meinert C, MechAnalyze – an algorithm for standardization and automation of compression test analysis, Tissue Eng Part C Methods doi:10.1089/ten.TEC.2021.0170  (2021). (B08)

Kappelmann-Fenzl M, Schmidt SK, Fischer S, Schmid R, Lammerhirt L, Fischer L, Schrufer S, Thievessen I, Schubert DW, Matthies A, Detsch R, Boccaccini AR, Arkudas A, Kengelbach-Weigand A, Bosserhoff AK, Molecular Changes Induced in Melanoma by Cell Culturing in 3D Alginate Hydrogels, Cancers (Basel) 13(16) (2021). (C03, A01, A07, B06)

Kim J, Bakirci E, O’Neill KL, Hrynevich A, Dalton PD, Fiber Bridging during Melt Electrowriting of Poly(ε‐Caprolactone) and the Influence of Fiber Diameter and Wall Height, Macromol. Mater. Eng. 306(3) (2021). (B01)

Lechner A, Trossmann VT, Scheibel T, Impact of Cell Loading of Recombinant Spider Silk Based Bioinks on Gelation and Printability, Macromol Biosci doi:10.1002/mabi.202100390  (2021) e2100390. (C01)

Mueller C, Trujillo-Miranda M, Maier M, Heath DE, O’Connor AJ, Salehi S, Effects of External Stimulators on Engineered Skeletal Muscle Tissue Maturation, Adv. Mater. Interfaces 8(1) (2021) 2001167. (B03)

Muller SJ, Weigl F, Bezold C, Bacher C, Albrecht K, Gekle S, A hyperelastic model for simulating cells in flow, Biomech Model Mechanobiol 20(2) (2021) 509-520. (B07)

Muir VG, Qazi TH, Shan J, Groll J, Burdick JA, Influence of Microgel Fabrication Technique on Granular Hydrogel Properties, ACS Biomater Sci Eng doi:10.1021/acsbiomaterials.0c01612  (2021). (A02, A06)

Munawar MA, Schubert DW, Highly Oriented Electrospun Conductive Nanofibers of Biodegradable Polymers-Revealing the Electrical Percolation Thresholds, ACS Applied Polymer Materials doi:10.1021/acsapm.0c01332  (2021). (A07)

Munawar MA, Schubert DW, Revealing Electrical and Mechanical Performances of Highly Oriented Electrospun Conductive Nanofibers of Biopolymers with Tunable Diameter, Int J Mol Sci 22(19) (2021). (A07)

Nadernezhad A, Ryma M, Genç H, Cicha I, Jüngst T, Groll J, Melt Electrowriting of Isomalt for High‐Resolution Templating of Embedded Microchannels, Advanced Materials Technologies doi:10.1002/admt.202100221  (2021). (B02)

Neubauer VJ, Dobl A, Scheibel T, Silk-Based Materials for Hard Tissue Engineering, Materials (Basel) 14(3) (2021) 674. (C01)

Neubauer VJ, Trossmann VT, Jacobi S, Dobl A, Scheibel T, Recombinant Spider Silk Gels Derived from Aqueous-Organic Solvents as Depots for Drugs, Angew. Chem., Int. Ed. doi:10.1002/anie.202103147  (2021). (C01)

Pinzner F, Keller T, Mut J, Bechold J, Seibel J, Groll J, Polyoxazolines with a Vicinally Double-Bioactivated Terminus for Biomacromolecular Affinity Assessment, Sensors 21(9) (2021). (A06, B05)

Reakasame S, Dranseikiene D, Schrüfer S, Zheng K, Schubert DW, Boccaccini AR, Development of alginate dialdehyde-gelatin based bioink with methylcellulose for improving printability, Mat Sci Eng C-Mater doi:10.1016/j.msec.2021.112336  (2021) (B03, A07)

Ritter P, Bye LJ, Finol-Urdaneta RK, Lesko C, Adams DJ, Friedrich O, Gilbert DF, A method for high-content functional imaging of intracellular calcium responses in gelatin-immobilized non-adherent cells, Exp Cell Res 395(2) (2020) 112210. (B08)

Ryma M, Tylek T, Bloehbaum J, Fernandez R, Boehm C, Blum C, Kastenmueller W, Gasteiger G, Groll J, Translation of Collagen Ultrastructure to Biomaterial Fabrication for Material Independent but Highly Efficient Topographic Immunomodulation, Adv. Mater. doi:10.1002/adma.202101228  (2021). (B02)

Schmid R, Schmidt SK, Detsch R, Horder H, Blunk T, Schrüfer S, Schubert DW, Fischer L, Thievessen I, Heltmann‐Meyer S, Steiner D, Schneidereit D, Friedrich O, Grüneboom A, Amouei H, Wajant H, Horch RE, Bosserhoff AK, Arkudas A, Kengelbach‐Weigand A, A New Printable Alginate/Hyaluronic Acid/Gelatin Hydrogel Suitable for Biofabrication of In Vitro and In Vivo Metastatic Melanoma Models, Adv. Funct. Mater. doi:10.1002/adfm.202107993 (2021). (C03, A01, A07, B06, B08, C02, C04)

Schneidereit D, Brollochs A, Ritter P, Kreiss L, Mokhtari Z, Beilhack A, Kronke G, Ackermann JA, Faas M, Gruneboom A, Schurmann S, Friedrich O, An advanced optical clearing protocol allows label-free detection of tissue necrosis via multiphoton microscopy in injured whole muscle, Theranostics 11(6) (2021) 2876-2891. (B08)

Schubert DW, Simple Model for the Spreading of Inks in Bioprinting—Revealing Relevant Scaling Laws—Part I Theory, Macromol. Theory Simul. doi:10.1002/mats.202100032  (2021). (A07)

Schubert DW, Allen V, Dippel U, Revealing Novel Power Laws and Quantization in Electrospinning Considering Jet Splitting-Toward Predicting Fiber Diameter and Its Distribution Part II Experimental, Adv. Eng. Mater. 23(3) (2021). (A07)

Shafiee A, Cavalcanti AS, Saidy NT, Schneidereit D, Friedrich O, Ravichandran A, De-Juan-Pardo EM, Hutmacher DW, Convergence of 3D printed biomimetic wound dressings and adult stem cell therapy, Biomaterials 268 (2021) 120558. (B08)

Shan J, Bock T, Keller T, Forster L, Blunk T, Groll J, Tessmar J, TEMPO/TCC as a Chemo Selective Alternative for the Oxidation of Hyaluronic Acid, Molecules 26(19) (2021). (A02)

Sonnleitner D, Schäfer N, Wieland A, Fischer L, Pasberg P, Thievessen I, Lang G, PCL micro-dumbbells – A new class of polymeric particles reveals morphological biofunctionality, Applied Materials Today 24 (2021). (A07, B06)

Sonnleitner D, Sommer C, Scheibel T, Lang G, Approaches to inhibit biofilm formation applying natural and artificial silk-based materials, Mat Sci Eng C-Mater 131 (2021). (A07, C01)

Sonnleitner D, Schrüfer S, Berglund L, Schubert DW, Lang G, Correlating rheology and printing performance of fiber-reinforced bioinks to assess predictive modelling for biofabrication, Journal of Materials Research doi:10.1557/s43578-021-00276-5  (2021). (A07)

Spörrer M, Kah D, Gerum RC, Reischl B, Huraskin D, Dessalles CA, Schneider W, Goldmann WH, Herrmann H, Thievessen I, Clemen CS, Friedrich O, Hashemolhosseini S, Schröder R, Fabry B, doi:10.1101/2021.07.23.453481  (2021). (A01, B08, C02)

Steiner D, Mutschall H, Winkler S, Horch RE, Arkudas A, The Adipose-Derived Stem Cell and Endothelial Cell Coculture System-Role of Growth Factors?, Cells 10(8) (2021). (C04)

Steiner D, Winkler S, Heltmann-Meyer S, Trossmann V, Fey T, Scheibel T, Horch RE, Arkudas A, Enhanced vascularization andde novotissue formation in hydrogels made of engineered RGD-tagged spider silk proteins in the arteriovenous loop model, Biofabrication doi:10.1088/1758-5090/ac0d9b  (2021). (C01, C04)

Uribe-Gomez J, Posada-Murcia A, Shukla A, Ergin M, Constante G, Apsite I, Martin D, Schwarzer M, Caspari A, Synytska A, Salehi S, Ionov L, Shape-Morphing Fibrous Hydrogel/Elastomer Bilayers Fabricated by a Combination of 3D Printing and Melt Electrowriting for Muscle Tissue Regeneration, ACS Appl. Bio Mater. 4(2) (2021) 1720-1730. (B03)

Vielreicher M, Bozec A, Schett G, Friedrich O, Murine Metatarsus Bone and Joint Collagen-I Fiber Morphologies and Networks Studied With SHG Multiphoton Imaging, Front. Bioeng. Biotechnol. 9 (2021) 608383. (B08)

Wieland A, Strissel PL, Schorle H, Bakirci E, Janzen D, Beckmann MW, Eckstein M, Dalton PD, Strick R, Brain and Breast Cancer Cells with PTEN Loss of Function Reveal Enhanced Durotaxis and RHOB Dependent Amoeboid Migration Utilizing 3D Scaffolds and Aligned Microfiber Tracts, Cancers (Basel) 13(20) (2021). (B01)

Winkler S, Mutschall H, Biggemann J, Fey T, Greil P, Korner C, Weisbach V, Meyer-Lindenberg A, Arkudas A, Horch RE, Steiner D, Human Umbilical Vein Endothelial Cell Support Bone Formation of Adipose-Derived Stem Cell-Loaded and 3D-Printed Osteogenic Matrices in the Arteriovenous Loop Model, Tissue Eng Part A 27(5-6) (2021) 413-423. (C04, C03)

Zahoranova A, Luxenhofer R, Poly(2-oxazoline)- and Poly(2-oxazine)-Based Self-Assemblies, Polyplexes, and Drug Nanoformulations-An Update, Adv Healthc Mater 10(6) (2021) 2001382. (A03)

Presentations 2021

Reineke B, Paulus I, Hauschild S, Groll, J, Förster S,(2021) All-in-one: On-chip fabrication and in-flow bioprinting of perfusable cell-laden microgel constructs, 6th World Congress 202, Tissue Engineering and Regenerative Medicine International Society (TERMIS2021) 15 – 19 November 2021 (virtual)

Müller SJ, Gekle S (2021) Numerical investigation of cell stress and deformation during Bioprinting, Biofabrication 2021 Online Conference, 27th to 29th Sep 2021 (virtual)

Müller SJ, Gekle S (2021) Numerical investigation of cell stress and deformation during Bioprinting, Annual workshop of the Franco-German Doctoral School, 23rd Sep 2021 (virtual)

Bakirci E, Janzen D, Wieland A, Hrynevich A, Tandon B, Schaefer N, Strissel PL, Strick R, Villmann C, Dalton PD (2021) Melt electrowritten fiber scaffolds as in vitro culture systems for nervous tissue engineering, 31st Annual Conference of the European Society for Biomaterials (ESB 2021), 5 to 9 September 2021 (B01)

Genc H, Hazur J, Karakaya E, Dietel B, Bider F, Groll J, Alexiou C, Boccaccini AR, Detsch R, Cicha I (2021) Alginate di-Aldehyde-Induced Oxidative Stress in Endothelial Cells and Fibroblasts: Cell-specific Responses, 31st Annual Conference of the European Society for Biomaterials (ESB 2021), 5 to 9 September 2021 (A01, B02, B06)

Hauptstein J, Forster L, Nadernezhad A, Groll J, Blunk T, Teßmar J (2021) Dual-stage Crosslinked Hyaluronic Acid-based Bioink Tailored for Chondrogenic Differentiation of Mesenchymal Stromal Cells, 31st Annual Conference of the European Society for Biomaterials (ESB 2021), 5 to 9 September 2021 (A02, A06, B02)

Hazur J, Grummel N, Schubert DW, Fabry B, Boccaccini AR (2021) Cell proliferation and morphology of NIH/3T3 cells are influenced by stress-relaxation behavior which can be modified by pre-crosslinking in alginate-gelatin-based hydrogels, 31st Annual Conference of the European Society for Biomaterials (ESB 2021), 5 to 9 September 2021 (virtual) (A01)

Heid S, Becker K, Byun J, Lu HH, Boccaccini AR (2021) Advanced modification of alginate dialdehyde-gelatine composite bioinks with bioactive inorganic fillers for 3D bioprinting approaches, 31st Annual Conference of the European Society for Biomaterials (ESB 2021), 5 to 9 September 2021 (B03)

Horder H, Guaza Lasheras M, Grummel N, Nadernezhad A, Herbig J, Ergün S, Teßmar J, Groll J, Fabry B, Bauer-Kreisel P, Blunk T (2021) Development of a 3D Bioprinted Breast Cancer-Stroma Co-Culture Model Utilizing Adipose-Derived Stroma Cell Spheroids, 18th Annual IFATS Conference, 18 to 20 September 2021 (A02, B02, B04, C02)

Horder H, Guaza Lasheras M, Grummel N, Nadernezhad A, Herbig J, Ergün S, Teßmar J, Groll J, Fabry B, Bauer-Kreisel P, Blunk T (2021) A 3D Bioprinted Breast Cancer-Adipose Tissue Model Utilizing Adipose-Derived Stromal Cell Spheroids, 31st Annual Conference of the European Society for Biomaterials (ESB 2021), 5 to 9 September 2021 (A02, B02, B04, C02)

Janzen D, Bakirci E, Hauptstein J, Forster L, Teßmar J, Blunk T, Dalton PD, Villmann C (2021) Neuronal Networks in a Fiber-Reinforced Hyaluronic Acid-Based Matrix, 31st Annual Conference of the European Society for Biomaterials (ESB 2021), 5 to 9 September 2021 (B01)

Paulus I, Reineke B, Shan J, Hauschild S, Teßmar J, Förster S, Groll J (2021) Bioprinting of microfluidic generated microgels based on a degradable and bioactivated POx/GelPA hybrid system, 31st Annual Conference of the European Society for Biomaterials (ESB 2021), 5 to 9 September 2021 (virtual) (A06, A02)

Mair VT, Paulus I, Groll J, Ryma M (2021) Sacrificial thermoresponsive Poly(2-cyclopropyl-oxazoline) as a beneficial material for freeform 3D printing and channel network generation in hydrogels, 31st Annual Conference of the European Society for Biomaterials (ESB 2021), 5 to 9 September 2021 (B02)

Munawar MA, Schubert DW (2021) Highly Oriented Electrospun Conductive Nanofibers of Biodegradable Polymers-Revealing the Electrical Percolation Thresholds, 31st Annual Conference of the European Society for Biomaterials (ESB 2021), 5 to 9 September 2021 (A07)

Munawar MA, Schubert DW (2021) Time-Temperature Superposition in Highly Oriented Electrospun Conductive Nanofibers of Biodegradable Polymers, 31st Annual Conference of the European Society for Biomaterials (ESB 2021), 5 to 9 September 2021 (A07)

Schmid R, Schmidt SK, Detsch R, Horder H, Blunk T, Schrüfer S, Schubert DW, Fischer L, Thievessen I, Heltmann-Meyer S, Steiner D, Schneidereit D, Friedrich O, Grüneboom A, Amouei H, Wajant H, Horch RE, Bosserhoff AK, Arkudas A, Kengelbach-Weigand A (2021) A new printable alginate / hyaluronic acid / gelatin hydrogel suitable for biofabrication of in vitro and in vivo metastatic melanoma models, 31st Annual Conference of the European Society for Biomaterials (ESB 2021), 5 to 9 September 2021 (C03, A01, A07, B06, B08, C02, C04)

Sonnleitner D, Lang G, Pasberg P, Schäfer N, Fischer L, Thievessen I (2021) PCL Micro-Dumbbells – A New Class of Polymeric Particles Reveals Morphological Biofunctionality, 31st Annual Conference of the European Society for Biomaterials (ESB 2021), 5 to 9 September 2021 (A07, B06)

Schruefer S, Schubert DW (2021) Strut spreading measurements as shape fidelity prediction tool, 31st Annual Conference of the European Society for Biomaterials (ESB 2021), 5 to 9 September 2021 (A07)

Wieland A, Strissel PL, Schorle H, Bakirci E, Dalton PD, Janzen D, Eckstein M, Villmann C, Strick R (2021) Aligned melt electrowritten fiber tracts and PTEN dysfunction reveal an alternating morphology mechanism for migrating brain tumor cells, 31st Annual Conference of the European Society for Biomaterials (ESB 2021), 5 to 9 September 2021 (B01)

Reineke B, Förster S, Groll, J, Hauschild S, Paulus I (2021) Advanced Microfluidics for Biofabrication, 6th European Symposium on Biomaterials (6th Euro BioMAT 2021), 05 – 06 May 2021 (virtual)

 

Posters 2021

Janzen D, Bakirci E, Hauptstein J, Forster L, Teßmar J, Blunk T, Dalton PD, Villmann C (2021) Neuronal Networks in a Fiber-Reinforced Hyaluronic Acid-Based Matrix, 31st Conference of the European Society for Biomaterials (ESB); September 5 to 9, 2021 (virtual)

Sivakumar S, Schmid R, Wieland A, Strissel PL, Strick R, Fischer L, Thievessen I, Kataev E, Arkudas A, Horch RE, Schubert DW, Kengelbach-Weigand A, “Role of Fiber Thickness and Surface Treatment of Electrospun Polycaprolactone Matrices on the Growth of Different Breast Cancer-Associated Cells” 31st Annual SBAOI meeting and 14th STERMI annual meeting and International conference on Biomaterials-based therapeutics, engineering and medicine (BIOTEM-2021), December 17-20, 2021.

Schmidt SK, Kappelmann-Fenzl M, Fischer S, Schmid R, Lämmerhirt L, Fischer L, Schrüfer S, Thievessen I, Schubert DW, Matthies A, Detsch R, Boccaccini AR, Arkudas A, Kengelbach-Weigand A, Bosserhoff AK (2021) Analyse molekularer Veränderungen im Melanom, induziert durch Zellkultivierung in 3D Alginat-Hydrogelen, 31. Deutscher Hautkrebskongress der Arbeitsgemeinschaft Dermatologische Onkologie (ADO), 08.-11. September 2021

Schmid R, Schmidt SK, Detsch R, Horder H, Blunk T, Schrüfer S, Schubert DW, Fischer L, Thievessen I, Heltmann-Meyer S, Steiner D, Schneidereit D, Friedrich O, Grüneboom A, Amouei H, Wajant H, Horch RE, Bosserhoff AK, Arkudas A, Kengelbach-Weigand A (2021) A new printable alginate / hyaluronic acid / gelatin hydrogel suitable for biofabrication of in vitro and in vivo metastatic melanoma models, 31st Annual Conference of the European Society for Biomaterials (ESB 2021), 5 to 9 September 2021 (C03, A01, A07, B06, B08, C02, C04)

Schmidt SK, Kappelmann-Fenzl M, Fischer S, Schmid R, Lämmerhirt L, Fischer L, Schrüfer S, Thievessen I, Schubert DW, Matthies A, Detsch R, Boccaccini AR, Arkudas A, Kengelbach-Weigand A, Bosserhoff AK (2021) Molecular changes induced in melanoma by cell culturing in 3D alginate hydrogels. 31st Annual Conference of the European Society for Biomaterials (ESB 2021), 5.-9. September 2021

Publications 2020

Aigner TB, Haynl C, Salehi S, O’Connor A, Scheibel T, Nerve guidance conduit design based on self-rolling tubes, Mater Today Bio 5 (2020) 100042. (C01, B03)

Amich J, Mokhtari Z, Strobel M, Vialetto E, Sheta D, Yu Y, Hartweg J, Kalleda N, Jarick KJ, Brede C, Jordan-Garrote AL, Thusek S, Schmiedgen K, Arslan B, Pinnecker J, Thornton CR, Gunzer M, Krappmann S, Einsele H, Heinze KG, Beilhack A, Three-Dimensional Light Sheet Fluorescence Microscopy of Lungs To Dissect Local Host Immune-Aspergillus fumigatus Interactions, mBio 11(1) (2020) 02752-19. (B08)

Apsite I, Constante G, Dulle M, Vogt L, Caspari A, Boccaccini AR, Synytska A, Salehi S, Ionov L, 4D Biofabrication of fibrous artificial nerve graft for neuron regeneration, Biofabrication 12(3) (2020) 035027. (B03)

Bacher C, Bender M, Gekle S, Flow-accelerated platelet biogenesis is due to an elasto-hydrodynamic instability, Proc. Natl. Acad. Sci. U. S. A. 117(32) (2020) 18969-18976. (B07)

Bachmann J, Ehlert E, Becker M, Otto C, Radeloff K, Blunk T, Bauer-Kreisel P, Ischemia-Like Stress Conditions Stimulate Trophic Activities of Adipose-Derived Stromal/Stem Cells, Cells 9(9) (2020) 1935. (C02)

Bakirci E, Schaefer N, Dahri O, Hrynevich A, Strissel P, Strick R, Dalton PD, Villmann C, Melt Electrowritten In Vitro Radial Device to Study Cell Growth and Migration, Adv Biosyst 4(10) (2020) 2000077. (B01)

Berger C, Bjorlykke Y, Hahn L, Muhlemann M, Kress S, Walles H, Luxenhofer R, Raeder H, Metzger M, Zdzieblo D, Matrix decoded – A pancreatic extracellular matrix with organ specific cues guiding human iPSC differentiation, Biomaterials 244 (2020) 119766. (A03)

Bohme I, Bosserhoff A, Extracellular acidosis triggers a senescence-like phenotype in human melanoma cells, Pigm. Cell Melanoma Res. 33(1) (2020) 41-51. (C03)

Cordes S, Mokhtari Z, Bartosova M, Mertlitz S, Riesner K, Shi Y, Mengwasser J, Kalupa M, McGeary A, Schleifenbaum J, Schrezenmeier J, Bullinger L, Diaz-Ricart M, Palomo M, Carrreras E, Beutel G, Schmitt CP, Beilhack A, Penack O, Endothelial damage and dysfunction in acute graft-versus-host disease, Haematologica doi:10.3324/haematol.2020.253716  (2020). (B08)

Dalton PD, Woodfield TBF, Mironov V, Groll J, Advances in Hybrid Fabrication toward Hierarchical Tissue Constructs, Adv Sci (Weinh) 7(11) (2020) 1902953. (A04, B02)

Distler T, Solisito AA, Schneidereit D, Friedrich O, Detsch R, Boccaccini AR, 3D printed oxidized alginate-gelatin bioink provides guidance for C2C12 muscle precursor cell orientation and differentiation via shear stress during bioprinting, Biofabrication 12(4) (2020) 045005. (A01, B06, B08)

Dranseikiene D, Schrufer S, Schubert DW, Reakasame S, Boccaccini AR, Cell-laden alginate dialdehyde-gelatin hydrogels formed in 3D printed sacrificial gel, J. Mater. Sci.: Mater. Med. 31(3) (2020) 31. (A01, A07)

Frischholz S, Berberich O, Bock T, Meffert RH, Blunk T, Resveratrol counteracts IL-1beta-mediated impairment of extracellular matrix deposition in 3D articular chondrocyte constructs, J. Tissue Eng. Regener. Med. 14(7) (2020) 897-908. (A02)

Gensler M, Leikeim A, Mollmann M, Komma M, Heid S, Muller C, Boccaccini AR, Salehi S, Groeber-Becker F, Hansmann J, 3D printing of bioreactors in tissue engineering: A generalised approach, PLoS One 15(11) (2020) 0242615. (B03)

Grosshaus C, Bakirci E, Berthel M, Hrynevich A, Kade JC, Hochleitner G, Groll J, Dalton PD, Melt Electrospinning of Nanofibers from Medical-Grade Poly(epsilon-Caprolactone) with a Modified Nozzle, Small 16(44) (2020) 2003471. (A04)

Hahn L, Maier M, Stahlhut P, Beudert M, Flegler V, Forster S, Altmann A, Toppke F, Fischer K, Seiffert S, Bottcher B, Luhmann T, Luxenhofer R, Inverse Thermogelation of Aqueous Triblock Copolymer Solutions into Macroporous Shear-Thinning 3D Printable Inks, ACS Appl Mater Interfaces 12(11) (2020) 12445-12456. (A03)

Hauptstein J, Bock T, Bartolf-Kopp M, Forster L, Stahlhut P, Nadernezhad A, Blahetek G, Zernecke-Madsen A, Detsch R, Jungst T, Groll J, Tessmar J, Blunk T, Hyaluronic Acid-Based Bioink Composition Enabling 3D Bioprinting and Improving Quality of Deposited Cartilaginous Extracellular Matrix, Adv Healthc Mater 9(15) (2020) 2000737. (A02, A06, B02, B06, Z01)

Hazur J, Detsch R, Karakaya E, Kaschta J, Tessmar J, Schneidereit D, Friedrich O, Schubert DW, Boccaccini AR, Improving alginate printability for biofabrication: establishment of a universal and homogeneous pre-crosslinking technique, Biofabrication 12(4) (2020) 045004. (A01, A02, A07, B06, B08)

Heid S, Boccaccini AR, Advancing bioinks for 3D bioprinting using reactive fillers: A review, Acta Biomater 113 (2020) 1-22. (B03)

Herold HM, Dobl A, Wohlrab S, Humenik M, Scheibel T, Designed Spider Silk-Based Drug Carrier for Redox- or pH-Triggered Drug Release, Biomacromolecules 21(12) (2020) 4904-4912. (C01)

Herrmann M, Engelke K, Ebert R, Muller-Deubert S, Rudert M, Ziouti F, Jundt F, Felsenberg D, Jakob F, Interactions between Muscle and Bone-Where Physics Meets Biology, Biomolecules 10(3) (2020) 432. (B05)

Hoefner C, Muhr C, Horder H, Wiesner M, Wittmann K, Lukaszyk D, Radeloff K, Winnefeld M, Becker M, Blunk T, Bauer-Kreisel P, Human Adipose-Derived Mesenchymal Stromal/Stem Cell Spheroids Possess High Adipogenic Capacity and Acquire an Adipose Tissue-like Extracellular Matrix Pattern, Tissue Eng Part A 26(15-16) (2020) 915-926. (C02)

Janzen D, Bakirci E, Wieland A, Martin C, Dalton PD, Villmann C, Cortical Neurons form a Functional Neuronal Network in a 3D Printed Reinforced Matrix, Adv Healthc Mater 9(9) (2020) 1901630. (B01)

Karakaya E, Fischer L, Hazur J, Boccaccini AR, Thievessen I, Detsch R, Strategies to evaluate alginate based bioinks applying extrusion printingfor biofabrication, Additive Manufacturing Meets Medicine, 2020. (B06, A01)

Kramer JPM, Aigner TB, Petzold J, Roshanbinfar K, Scheibel T, Engel FB, Recombinant spider silk protein eADF4(C16)-RGD coatings are suitable for cardiac tissue engineering, Sci. Rep. 10(1) (2020) 8789. (C01)

Kumari S, Lang G, DeSimone E, Spengler C, Trossmann VT, Lucker S, Hudel M, Jacobs K, Kramer N, Scheibel T, Engineered spider silk-based 2D and 3D materials prevent microbial infestation, Mater. Today 41 (2020) 21-33. (C01, A07)

Kumari S, Lang G, DeSimone E, Spengler C, Trossmann VT, Lucker S, Hudel M, Jacobs K, Kramer N, Scheibel T, Data for microbe resistant engineered recombinant spider silk protein based 2D and 3D materials, Data Brief 32 (2020) 106305. (C01, A07)

Landry MR, DuRoss AN, Neufeld MJ, Hahn L, Sahay G, Luxenhofer R, Sun C, Low dose novel PARP-PI3K inhibition via nanoformulation improves colorectal cancer immunoradiotherapy, Mater Today Bio 8 (2020) 100082. (A03)

Lehmann M, Muller SJ, Gekle S, Efficient viscosity contrast calculation for blood flow simulations using the lattice Boltzmann method, Int. J. Numer. Methods Fluids 92(11) (2020) 1463-1477. (B07)

Levato R, Jungst T, Scheuring RG, Blunk T, Groll J, Malda J, From Shape to Function: The Next Step in Bioprinting, Adv. Mater. 32(12) (2020) 1906423. (A02, B04, Z01)

Liebscher J, Tessmar J, Groll J, In Situ Polymer Analogue Generation of Azlactone Functions at Poly(oxazoline)s for Peptide Conjugation, Macromol. Chem. Phys. 221(1) (2020) 1900500. (A06, B04)

Lorson T, Ruopp M, Nadernezhad A, Eiber J, Vogel U, Jungst T, Luhmann T, Sterilization Methods and Their Influence on Physicochemical Properties and Bioprinting of Alginate as a Bioink Component, ACS Omega 5(12) (2020) 6481-6486. (A03)

Mancini IAD, Schmidt S, Brommer H, Pouran B, Schafer S, Tessmar J, Mensinga A, van Rijen MHP, Groll J, Blunk T, Levato R, Malda J, van Weeren PR, A composite hydrogel-3D printed thermoplast osteochondral anchor as example for a zonal approach to cartilage repair: in vivo performance in a long-term equine model, Biofabrication 12(3) (2020) 035028. (A02)

Mark C, Grundy TJ, Strissel PL, Bohringer D, Grummel N, Gerum R, Steinwachs J, Hack CC, Beckmann MW, Eckstein M, Strick R, O’Neill GM, Fabry B, Collective forces of tumor spheroids in three-dimensional biopolymer networks, eLife 9 (2020) 51912. (C02, B01)

Mechau J, Frank A, Bakirci E, Gumbel S, Jungst T, Giesa R, Groll J, Dalton PD, Schmidt HW, Hydrophilic (AB)n Segmented Copolymers for Melt Extrusion‐Based Additive Manufacturing, Macromol. Chem. Phys. 222(1) (2020). (A04)

Mertgen AS, Trossmann VT, Guex AG, Maniura-Weber K, Scheibel T, Rottmar M, Multifunctional Biomaterials: Combining Material Modification Strategies for Engineering of Cell-Contacting Surfaces, ACS Appl Mater Interfaces 12(19) (2020) 21342-21367. (C01)

Mirzaei Z, Kuth S, Schubert DW, Detsch R, Roether JA, Blunk T, Kordestani SS, Boccaccini AR, Preparation and Characterization of Electrospun Blend Fibrous Polyethylene Oxide:Polycaprolactone Scaffolds to Promote Cartilage Regeneration, Adv. Eng. Mater. 22(9) (2020). (A01, A02, A07, B06)

Muller SJ, Mirzahossein E, Iftekhar EN, Bacher C, Schrufer S, Schubert DW, Fabry B, Gekle S, Flow and hydrodynamic shear stress inside a printing needle during biofabrication, PLoS One 15(7) (2020) 0236371. (B07, A01, A07)

Muller-Deubert S, Ege C, Krug M, Meissner-Weigl J, Rudert M, Bischof O, Jakob F, Ebert R, Phosphodiesterase 10A Is a Mediator of Osteogenic Differentiation and Mechanotransduction in Bone Marrow-Derived Mesenchymal Stromal Cells, Stem Cells Int. 2020 (2020) 7865484. (B05)

Mutschall H, Winkler S, Weisbach V, Arkudas A, Horch RE, Steiner D, Bone tissue engineering using adipose-derived stem cells and endothelial cells: Effects of the cell ratio, J. Cell. Mol. Med. 24(12) (2020) 7034-7043. (C04, C03)

Nadernezhad A, Forster L, Netti F, Adler-Abramovich L, Tessmar J, Groll J, Rheological analysis of the interplay between the molecular weight and concentration of hyaluronic acid in formulations of supramolecular HA/FmocFF hybrid hydrogels, Polym. J. 52(8) (2020) 1007-1012. (A02, B04)

No YJ, Tarafder S, Reischl B, Ramaswamy Y, Dunstan C, Friedrich O, Lee CH, Zreiqat H, High-Strength Fiber-Reinforced Composite Hydrogel Scaffolds as Biosynthetic Tendon Graft Material, ACS Biomater Sci Eng 6(4) (2020) 1887-1898. (B08)

Rausch M, Bohringer D, Steinmann M, Schubert DW, Schrufer S, Mark C, Fabry B, Measurement of Skeletal Muscle Fiber Contractility with High-Speed Traction Microscopy, Biophys. J. 118(3) (2020) 657-666. (A01, A07)

Roshanbinfar K, Esser TU, Engel FB, Stem Cells and Their Cardiac Derivatives for Cardiac Tissue Engineering and Regenerative Medicine, Antioxid. Redox Signaling doi:10.1089/ars.2020.8193  (2020). (C01)

Russell CS, Mostafavi A, Quint JP, Panayi AC, Baldino K, Williams TJ, Daubendiek JG, Hugo Sánchez V, Bonick Z, Trujillo-Miranda M, Shin SR, Pourquie O, Salehi S, Sinha I, Tamayol A, In Situ Printing of Adhesive Hydrogel Scaffolds for the Treatment of Skeletal Muscle Injuries, ACS Appl. Bio Mater. 3(3) (2020) 1568-1579. (B03)

Salehi S, Koeck K, Scheibel T, Spider Silk for Tissue Engineering Applications, Molecules 25(3) (2020) 737. (B03, C01)

Schmid R, Schmidt SK, Hazur J, Detsch R, Maurer E, Boccaccini AR, Hauptstein J, Tessmar J, Blunk T, Schrufer S, Schubert DW, Horch RE, Bosserhoff AK, Arkudas A, Kengelbach-Weigand A, Comparison of Hydrogels for the Development of Well-Defined 3D Cancer Models of Breast Cancer and Melanoma, Cancers 12(8) (2020) 2320. (C03, A01, A02, A07, C02)

Schmidt S, Abinzano F, Mensinga A, Tessmar J, Groll J, Malda J, Levato R, Blunk T, Differential Production of Cartilage ECM in 3D Agarose Constructs by Equine Articular Cartilage Progenitor Cells and Mesenchymal Stromal Cells, Int. J. Mol. Sci. 21(19) (2020) 7071. (A02)

Schrufer S, Sonnleitner D, Lang G, Schubert DW, A Novel Simple Approach to Material Parameters from Commonly Accessible Rheometer Data, Polymers 12(6) (2020) 1276. (A07)

Schubert DW, Novel Theoretical Self‐Consistent Mean‐Field Approach to Describe the Conductivity of Carbon Fiber‐Filled Thermoplastics: Part III—Application of the Concept to Mechanical Properties of Composites and Polymer Solutions, Adv. Eng. Mater. 22(9) (2020). (A07)

Sun W, Starly B, Daly AC, Burdick JA, Groll J, Skeldon G, Shu W, Sakai Y, Shinohara M, Nishikawa M, Jang J, Cho DW, Nie M, Takeuchi S, Ostrovidov S, Khademhosseini A, Kamm RD, Mironov V, Moroni L, Ozbolat IT, The bioprinting roadmap, Biofabrication 12(2) (2020) 022002. (B02, B04)

Tolksdorf J, Horch RE, Gruner JS, Schmid R, Kengelbach-Weigand A, Schubert DW, Werner S, Schneidereit D, Friedrich O, Ludolph I, Size matters-in vitro behaviour of human fibroblasts on textured silicone surfaces with different pore sizes, J. Mater. Sci.: Mater. Med. 31(2) (2020) 23. (C04, B08, A07, C03)

Weizel A, Distler T, Schneidereit D, Friedrich O, Brauer L, Paulsen F, Detsch R, Boccaccini AR, Budday S, Seitz H, Complex mechanical behavior of human articular cartilage and hydrogels for cartilage repair, Acta Biomater 118 (2020) 113-128. (B08)

Presentations 2020

Trujillo Miranda M, Müller C, Salehi S (2020) Effect of external stimulus on biofabricated skeletal muscle microtissues, 11th World biomaterials congress WBC 2020 11 – 15 December 2020 — Web conference

Russell CS, Mostafavi A, Quint JP, Panayi A, Udeh K, Williams TJ, Daubendiek JG, Sánchez VH, Bonick Z, Trujill-Miranda M, Ryon Shin S, Pourquie O, Salehi S, Sinha I, Tamayol A (2020) In situ printing of gelatin-based scaffolds for the treatment of muscle injuries, World biomaterials congress WBC 2020 Glasgow 11 – 15 December 2020 – Web conference

Engel, FB (2020) 3D-Druck von funktionsfähigen Herzen – Wunsch und Wirklichkeit, 29. Jahrestagung der Deutschen Transplantationsgesellschaft, 15 – 17 October 2020 Köln, Germany

Engel, FB (2020) Are 3D-printed hearts the ultimate solution?, 34th Annual Meeting of the “European Association for Cardio-Thoracic Surgery”, 8 – 10 October 2020 – Web conference

Engel, FB (2020) Heart regeneration: hopes and pitfalls, First Digital Conference of the International Giessen Graduate Centre for the Life Sciences (GGL) 29 – 30 September 2020 – Web conference

Heid S, Lu HH, Venkatraman A, Detsch R, Boccaccini AR (2020) Evaluating the 3D Printaility of ADA-GEL-based Composite Bioinks, Materials Science and Engineering (MSE), 22 – 25 September 2020 – Web conference

Karakaya E, Bider F, Frank A, Schrüfer S, Boccaccini AR, Schmidt HW, Schubert D, Detsch R (2020) Comparative studies of two different sized inkjet nozzles for several bioinks based on alginate, Materials Science and Engineering (MSE), 22 – 25 September 2020 – Web conference

Hauptstein J, Böck T, Bartolf-Kopp M, Forster L, Stahlhut P, Nadernezhad A, Blahetek G, Zernecke-Madsen A, Detsch R, Jüngst T, Groll J, Teßmar J, Blunk T (2020) Hyaluronic Acid-based Bioink Composition Enabling 3D Bioprinting and Improving Quality of Deposited Cartilaginous Extracellular Matrix,           Materials Science and Engineering (MSE), 22 – 25 September 2020 – Web conference

Karakya E, Fischer L, Hazur J, Boccaccini ARB, Thievessen I, Detsch R (2020) Strategies to evaluate alginate based bioinks applyingextrusion printing for biofabrication, AMMM – Additive Manufacturing Meets Medicine 2020, 9 – 11 September 2020 – Web conference

Detsch R (2020) Challenges and Limits of Bioprinting to Generate Functional Tissue Models 02.07.2020, Virtuelle MedtecLIVE 2020  MedtecLIVE 2020 & MedTech Summit GO VIRTUAL! 30. Juni bis 02. Juli 2020 https://www.medteclive.com/de/aussteller-programm

Hauptstein J, Bartolf-Kopp M, Forster L, Detsch R, Jüngst T, Groll J, Teßmar J, Blunk T (2020) Hyaluronic Acid-based Bioink Composition Enabling 3D Bioprinting and ImprovingQuality of Deposited Cartilaginous Extracellular Matrix, 5th Bioinspired Materials 2020 Conference, 16 – 19 March 2020 – Web conference

Hazur J, Geske M, Esper L, Boccaccini  AR (2020) Tailoring mechanical properties and degradation behavior of alginate dialdehyde-gelatin (ADA-GEL) hydrogels, 5th Bioinspired Materials 2020 Conference, 16 – 19 March 2020 – Web conference

Nadernezhad A, Ryma M, Genc H, Cicha I, Groll J (2020) Design of pre-endothelialized microvascular structures for biofabrication of in vitro tissue models, 5th Bioinspired Materials 2020 Conference, 16 – 19 March 2020 – Web conference

Trossmann V, Esser T, Döbl A, Petzold J, Aigner T, Engel F, Scheibel  T (2020) Recombinant spider silk proteins for cardiac tissue engineering, 5th Bioinspired Materials 2020 Conference, 16 – 19 March 2020 – Web conference

Janzen D, Bakirci E, Wieland A, Strissel PL, Strick R, Dalton PD, VIllmann C (2020) Neural networks in 3D printed fiber-reinforced hydrogels, 5th Bioinspired Materials 2020 Conference, 16 – 19 March 2020 – Web conference

Lang G, Kumari S, DeSimone E, Trossmann V, Hudel M, Spengler C, Krämer N,Jacobs K, Scheibel T (2020) Recombinant Spider Silk Films and Hydrogels with intrinsic Bacteriostatic and Fungistatic Properties, 5th Bioinspired Materials 2020 Conference, 16 – 19 March 2020 – Web conference

Engel F (2020) 3D-Druck von funktionsfähigen Herzen- Wunsch und Wirklichkeit, Jahrestagung DGPK/DGTHG, 2. March 2020, Wiesbaden, Germany

Tessmar J (2020) 3D-Druck von Organen -Fiktion oder Wirklichkeit? 18.02.2020 Universitätsbund Würzburg Marktheidenfeld, im Raum 3.1 des Alten Rathauses, Marktplatz 24

Salehi, S (2020) Application of micro/nano scale substrates for skeletal muscle tissue regeneration, 8th International Conference on Nanoscience and Nanotechnology (ICONN 2020) 9 – 13 February 2020, Bisbane, Australia

Lang G, Kumari S, DeSimone E, Trossmann V, Hudel M, Spengler C, Krämer N,Jacobs K, Scheibel T (2020) Bio-selective bacteriostatic and fungistatic surfaces made of recombinant spider silk proteins, 8th International Conference on Nanoscience and Nanotechnology (ICONN 2020), 9 – 13 Febrauary 2020, Brisbane, Australia

Engel F (2020) 3D-Druck von funktionsfähigen Herzen- Wunsch und Wirklichkeit, Wintermeeting der AG17 der DGK, 24. Januar 2020, Düsseldorf

Posters 2020

Müller C, Salehi S (2020) Fabrication of support structures for 3D bioprinting skeletal muscle cells, World biomaterials congress WBC 2020 Glasgow, 11 – 15 December 2020 – Web conference

Schmidt SK, Schmid R, Arkudas A, Kengelbach-Weigand A, Bosserhoff AK (2020) 3D-Druck von Melanomzellen mit kommerziell erwerblichen Hydrogelen, Digitaler 30. Deutscher Hautkrebskongress der Arbeitsgemeinschaft Dermatologische Onkologie (ADO), 10.-11. September 2020

Frank A, Mechau J, Bakirci E, Gumbel S, Giesa R, Groll J, Dalton PD, Schmidt HW (2020) Hydrogels based on (AB)n-segmented copolymers with polyethylene glycol segments for biofabrication, 5th Bioinspired Materials 2020 Conference, 16 – 19 March 2020 – Web conference

Schneidereit D, Distler T, Meinert C, Carlé B, Detsch R, Schürmann S, Hutmacher D, Boccaccini AR, Friedrich O (2020) Multiphoton Microscopy: A powerful tool to reveal cellular organization and morphology within bioengineered constructs in 3D, 5th Bioinspired Materials 2020 Conference, 16 – 19 March 2020 – Web conference

Forster L, Hauptstein J, Weichhold J, Nadernezhad A, Böhm TM, Zorn T, Schmidt S, Blunk T, Teßmar J (2020) Hyaluronic Acid based Hydrogel Platform with MultifuctionalCrosslinkers for the Controlled Differentiation of Mesenchymal Stem Cells, 5th Bioinspired Materials 2020 Conference, 16 – 19 March 2020 – Web conference

Horder H, Lasheras MG, Grummel N, Fabry B, Teßmar J, Bauer-Kreisel P, Blunk T (2020) 3D Bioprinting of Multicellular Adipose-derived Stromal Cell Spheroids in Hyaluronic Acid-based Bioinks, 5th Bioinspired Materials 2020 Conference, 16 – 19 March 2020 – Web conference

Karakaya E, Frank A, Forster L, Teßmar J, Schmidt HW, Boccaccini AR, Detsch R (2020) Evaluation of inkjet printing for ADA-PEG bioinks, 5th Bioinspired Materials 2020 Conference, 16 – 19 March 2020 – Web conference

Hahn L, Beudert M, Lorson T, Lühmann T, Luxenhofer R (2020) Poly(2-oxazoline)/Poly(2-oxazine) copolymers: From thermoresponsive hydrogels towards functional bioink formulations, 5th Bioinspired Materials 2020 Conference, 16 – 19 March 2020 – Web conference

Paulus I, Reineke B, Hauschild S, Förster S, Groll J (2020) Cell-loaded Microgels as mechanical Protection and controlled Microenvironment for Cells in Bioinks, 5th Bioinspired Materials 2020 Conference, 16 – 19 March 2020 – Web conference

Trossmann V, Steiner D, Heltmann-Meyer S, Winkler S, Amouei H, Wajant H, Fey T, Greil P, Scheibel T, Arkudas A, Horch RE, Establishment of a fiber-based and RGD-modified spider silk for the generation of a drug-producing tissue container, 5th Bioinspired Materials 2020 Conference, 16 – 19 March 2020 – Web conference

Doğan L, Scheuring RG, Groll J, Ergün S (2020) 3D Printing of Vascular Structures From Stem and Progenitor Cells, 5th Bioinspired Materials 2020 Conference, 16 – 19 March 2020 – Web conference

Döbl A, Herold H, Wohlrab S, Humenik M, Scheibel T (2020) Spider Silk-based carrier for controlled redox- and pH-triggered drug release, 5th Bioinspired Materials 2020 Conference, 16 – 19 March 2020 – Web conference

Müller C, Gensler M, Heid S, Boccaccini AR, Detsch R, Hansmann J, Salehi S (2020) Simultaneous printing of biofabricates and tailored bioreactors, 5th Bioinspired Materials 2020 Conference, 16 – 19 March 2020 – Web conference

 

Publications 2019

Apsite I, Uribe JM, Posada AF, Rosenfeldt S, Salehi S, Ionov L, 4D biofabrication of skeletal muscle microtissues, Biofabrication 12(1) (2019) 015016. (B03)

Bacher C, Gekle S, Computational modeling of active deformable membranes embedded in three-dimensional flows, Phys. Rev. E 99(6-1) (2019) 062418. (B07)

Berberich O, Blöhbaum J, Hölscher-Doht S, Meffert RH, Teßmar J, Blunk T, Groll J, Catechol-modified poly(oxazoline)s with tunable degradability facilitate cell invasion and lateral cartilage integration, J. Ind. Eng. Chem. 80 (2019) 757-769. (A06, B04)

Blohbaum J, Paulus I, Poppler AC, Tessmar J, Groll J, Influence of charged groups on the cross-linking efficiency and release of guest molecules from thiol-ene cross-linked poly(2-oxazoline) hydrogels, J Mater Chem B 7(10) (2019) 1782-1794. (A06)

Condor M, Mark C, Gerum RC, Grummel NC, Bauer A, Garcia-Aznar JM, Fabry B, Breast Cancer Cells Adapt Contractile Forces to Overcome Steric Hindrance, Biophys. J. 116(7) (2019) 1305-1312. (C02)

Daddi-Moussa-Ider A, Kurzthaler C, Hoell C, Zottl A, Mirzakhanloo M, Alam MR, Menzel AM, Lowen H, Gekle S, Frequency-dependent higher-order Stokes singularities near a planar elastic boundary: Implications for the hydrodynamics of an active microswimmer near an elastic interface, Phys. Rev. E 100(3-1) (2019) 032610. (B07)

Distler T, Ruther F, Boccaccini AR, Detsch R, Development of 3D Biofabricated Cell Laden Hydrogel Vessels and a Low-Cost Desktop Printed Perfusion Chamber for In Vitro Vessel Maturation, Macromol. Biosci. 19(9) (2019) 1900245. (B06, A01, B03)

Ertl J, Ortiz-Soto ME, Le TA, Bechold J, Shan J, Tessmar J, Engels B, Seibel J, Tuning the Product Spectrum of a Glycoside Hydrolase Enzyme by a Combination of Site-Directed Mutagenesis and Tyrosine-Specific Chemical Modification, Chem. – Eur. J. 25(26) (2019) 6533-6541. (B05)

Esser TU, Roshanbinfar K, Engel FB, Promoting vascularization for tissue engineering constructs: current strategies focusing on HIF-regulating scaffolds, Expert Opin. Biol. Ther. 19(2) (2019) 105-118. (C01)

Gutmann M, Bechold J, Seibel J, Meinel L, Luhmann T, Metabolic Glycoengineering of Cell-Derived Matrices and Cell Surfaces: A Combination of Key Principles and Step-by-Step Procedures, ACS Biomater Sci Eng 5(1) (2019) 215-233. (A03, B05)

Humenik M, Pawar K, Scheibel T, Nanostructured, Self-Assembled Spider Silk Materials for Biomedical Applications, Adv. Exp. Med. Biol. 1174 (2019) 187-221. (C01)

Kahl M, Gertig M, Hoyer P, Friedrich O, Gilbert DF, Ultra-Low-Cost 3D Bioprinting: Modification and Application of an Off-the-Shelf Desktop 3D-Printer for Biofabrication, Front. Bioeng. Biotechnol. 7 (2019) 184. (B08)

Kengelbach-Weigand A, Tasbihi K, Strissel PL, Schmid R, Marques JM, Beier JP, Beckmann MW, Strick R, Horch RE, Boos AM, Plasticity of patient-matched normal mammary epithelial cells is dependent on autologous adipose-derived stem cells, Sci. Rep. 9(1) (2019) 10722. (C03)

Lübtow MM, Lorson T, Finger T, Gröber‐Becker FK, Luxenhofer R, Combining Ultra‐High Drug‐Loaded Micelles and Injectable Hydrogel Drug Depots for Prolonged Drug Release, Macromol. Chem. Phys. 221(1) (2019). (A03)

Lubtow MM, Mrlik M, Hahn L, Altmann A, Beudert M, Luhmann T, Luxenhofer R, Temperature-Dependent Rheological and Viscoelastic Investigation of a Poly(2-methyl-2-oxazoline)-b-poly(2-iso-butyl-2-oxazoline)-b-poly(2-methyl-2-oxaz oline)-Based Thermogelling Hydrogel, J. Funct. Biomater. 10(3) (2019) 36. (A03)

Hahn L, Maier M, Stahlhut P, Beudert M, Altmann A,  Töppke F, Lühmann T, Luxenhofer R, Inverse Thermogelation of Aqueous Triblock Copolymer Solutions into Macroporous Shear-Thinning 3D Printable Inks, ChemRxiv Published elsewere (2019). (A03)

Madonna R, Van Laake LW, Botker HE, Davidson SM, De Caterina R, Engel FB, Eschenhagen T, Fernandez-Aviles F, Hausenloy DJ, Hulot JS, Lecour S, Leor J, Menasche P, Pesce M, Perrino C, Prunier F, Van Linthout S, Ytrehus K, Zimmermann WH, Ferdinandy P, Sluijter JPG, ESC Working Group on Cellular Biology of the Heart: position paper for Cardiovascular Research: tissue engineering strategies combined with cell therapies for cardiac repair in ischaemic heart disease and heart failure, Cardiovasc. Res. 115(3) (2019) 488-500. (C01)

McMaster R, Hoefner C, Hrynevich A, Blum C, Wiesner M, Wittmann K, Dargaville TR, Bauer-Kreisel P, Groll J, Dalton PD, Blunk T, Tailored Melt Electrowritten Scaffolds for the Generation of Sheet-Like Tissue Constructs from Multicellular Spheroids, Adv Healthc Mater 8(7) (2019) 1801326. (C02, A04)

Neubauer JW, Hauck N, Mannel MJ, Seuss M, Fery A, Thiele J, Mechanoresponsive Hydrogel Particles as a Platform for Three-Dimensional Force Sensing, ACS Appl Mater Interfaces 11(29) (2019) 26307-26313. (B07)

Ortiz-Soto ME, Reising S, Schlosser A, Seibel J, Structural and functional role of disulphide bonds and substrate binding residues of the human beta-galactoside alpha-2,3-sialyltransferase 1 (hST3Gal1), Sci. Rep. 9(1) (2019) 17993. (B05)

Ostrovidov S, Salehi S, Costantini M, Suthiwanich K, Ebrahimi M, Sadeghian RB, Fujie T, Shi X, Cannata S, Gargioli C, Tamayol A, Dokmeci MR, Orive G, Swieszkowski W, Khademhosseini A, 3D Bioprinting in Skeletal Muscle Tissue Engineering, Small 15(24) (2019) 1805530. (B03)

Roshanbinfar K, Mohammadi Z, Sheikh-Mahdi Mesgar A, Dehghan MM, Oommen OP, Hilborn J, Engel FB, Carbon nanotube doped pericardial matrix derived electroconductive biohybrid hydrogel for cardiac tissue engineering, Biomater. Sci. 7(9) (2019) 3906-3917. (C01)

Ryma M, Blohbaum J, Singh R, Sancho A, Matuszak J, Cicha I, Groll J, Easy-to-Prepare Coating of Standard Cell Culture Dishes for Cell-Sheet Engineering Using Aqueous Solutions of Poly(2-n-propyl-oxazoline), ACS Biomater Sci Eng 5(3) (2019) 1509-1517. (B02)

Saric M, Scheibel T, Engineering of silk proteins for materials applications, Curr. Opin. Biotechnol. 60 (2019) 213-220. (C01)

Schaefer N, Janzen D, Bakirci E, Hrynevich A, Dalton PD, Villmann C, 3D Electrophysiological Measurements on Cells Embedded within Fiber-Reinforced Matrigel, Adv Healthc Mater 8(5) (2019) 1801226. (B01)

Schmidt SK, Schmid R, Arkudas A, Kengelbach-Weigand A, Bosserhoff AK, Tumor Cells Develop Defined Cellular Phenotypes After 3D-Bioprinting in Different Bioinks, Cells 8(10) (2019) 1295. (C03)

Schneidereit D, Schurmann S, Friedrich O, PiezoGRIN: A High-Pressure Chamber Incorporating GRIN Lenses for High-Resolution 3D-Microscopy of living Cells and Tissues, Adv Sci (Weinh) 6(4) (2019) 1801453. (B08)

Schubert DW, Revealing Novel Power Laws and Quantization in Electrospinning Considering Jet Splitting-Toward Predicting Fiber Diameter and Its Distribution, Macromol. Theory Simul. 28(4) (2019). (A07)

Schwedhelm I, Zdzieblo D, Appelt-Menzel A, Berger C, Schmitz T, Schuldt B, Franke A, Muller FJ, Pless O, Schwarz T, Wiedemann P, Walles H, Hansmann J, Automated real-time monitoring of human pluripotent stem cell aggregation in stirred tank reactors, Sci. Rep. 9(1) (2019) 12297. (B03)

Steiner D, Lang G, Fischer L, Winkler S, Fey T, Greil P, Scheibel T, Horch RE, Arkudas A, Intrinsic Vascularization of Recombinant eADF4(C16) Spider Silk Matrices in the Arteriovenous Loop Model, Tissue Eng Part A 25(21-22) (2019) 1504-1513. (C04, A07, C01, C03)

Wicklein VJ, Singer BB, Scheibel T, Salehi S, Chapter 17 – Nanoengineered biomaterials for corneal regeneration, Micro and Nano Technologies (2019), pp. 379-415. (B03, C01)

Ziouti F, Ebert R, Rummler M, Krug M, Muller-Deubert S, Ludemann M, Jakob F, Willie BM, Jundt F, NOTCH Signaling Is Activated through Mechanical Strain in Human Bone Marrow-Derived Mesenchymal Stromal Cells, Stem Cells Int. 2019 (2019) 5150634. (B05)

Presentations 2019

Altmann S, Mut J, Wolf N, Bechold J, Jakob F, Seibel J, Ebert R (2019) Glycoengineering as a tool to control the behavior of bone marrow-derived mesenchymal stromal cells in biofabrication processes, 1st MuSkITYR Symposium 2. – 3.12.2019 (Günzburg, Germany)

Detsch R (2019) Leben aus dem 3D Drucker: Chancen, Herausforderungen und Limitationen für verschiedene medizintechnische Anwendungen, Collegium Alexandrinum der Universität Erlangen-Nürnberg – Wissenschaft für die Öffentlichkeit – Novmber, 28, 2019 (Erlangen Germany)

Schmid R, Schmidt S, Hazur J, Detsch R, Boccaccini AR, Bosserhoff A, Horch RE, Arkudas A, Kengelbach-Weigand A (2019) Analyse von Tumor Dormancy und Progression in biofabrizierten und in vivo vaskularisierten 3D Modellen; 50. Jahrestagung der Deutschen Gesellschaft der Plastischen, Rekonstruktiven und Ästhetischen Chirurgen (DGPRÄC) September 26-28, 2019 (Hamburg, Germany)

Kengelbach-Weigand A (2019) In vitro und in vivo Modelle zur Erforschung der Mammakarzinompathogenese; 50. Jahrestagung der Deutschen Gesellschaft der Plastischen, Rekonstruktiven und Ästhetischen Chirurgen (DGPRÄC) September 26-28, 2019 (Hamburg, Germany)

Hazur J, Kaschta J, Schubert DW, Detsch R, Boccaccini AR (2019) Rheologische Charakterisierung und 3D Biodrucken von vorvernetzten Alginat Biotinten, WerkstoffWoche Dresden; September 18 to 20, 2019 (Dresden, Germany)

Trossmann V (2019) Rekombinante Spinnenseidenproteine für die Regeneration von Herzgewebe, WerkstoffWoche Dresden; September 18 to 20, 2019 (Dresden, Germany)

Lang G, Kumari S, Desimone E, Spengler C, Lücker S, Hudel M, Jacobs K, Krämer N, Scheibel T (2019) Bio-selective bacteriostatic and fungistatic surfaces made of recombinant spider silk proteins, 30th Annual Conference of the European Society for Biomaterials in tandem with the 26thAnnual Conference of the German Society for Biomaterials (DGBM); September 9 to 13, 2019 (Dresden, Germany)

Detsch R, Hazur J, Karakaya E, Kuth S, Heid S, Boccaccini AR (2019) Evaluating three different extrusion-based bioprinting systems using cell-laden alginate-based bioinks, 30th Annual Conference of the European Society for Biomaterials in tandem with the 26thAnnual Conference of the German Society for Biomaterials (DGBM); September 9 to 13, 2019 (Dresden, Germany)

Ryma M, Tylek T, Blöhbaum J, Fernandez R, Groll J (2019) Melt-Electrowritten 3D Scaffolds Based on Aligned Nano-Structured Microfibers for Topography-Mediated Immunomodulation of Human Macrophages, 30th Annual Conference of the European Society for Biomaterials in tandem with the 26thAnnual Conference of the German Society for Biomaterials (DGBM); September 9 to 13, 2019 (Dresden, Germany)

Shan J, Böck TC, Tessmar J, Groll J (2019) EMPO Oxidation of Hyaluronic Acid for Stable Hydrogel Formation via Schiff Base Chemistry, 30th Annual Conference of the European Society for Biomaterials in tandem with the 26thAnnual Conference of the German Society for Biomaterials (DGBM); September 9 to 13, 2019 (Dresden, Germany)

Trujillo Miranda M, Uribe J, Apsite I, DeSimone E, Salehi S, Ionov L (2019) Fabrication of tubular structure to mimic the osteon structure, 30th Annual Conference of the European Society for Biomaterials in tandem with the 26thAnnual Conference of the German Society for Biomaterials (DGBM); September 9 to 13, 2019 (Dresden, Germany)

Hahn L, Maier M, Sochor B, Beudert M, Lühmann T, Luxenhofer R (2019) Poly(2-oxazoline)/Poly(2-oxazine) based Copolymers: Physical gelation and related properties, 30th Annual Conference of the European Society for Biomaterials in tandem with the 26thAnnual Conference of the German Society for Biomaterials (DGBM); September 9 to 13, 2019 (Dresden, Germany)

Wieland A, Strissel PL, Bakirci E, Dalton PD, Feigenspan A, Villmann C, Strick R (2019) Soft matrix composites as three-dimensional models mimicking Glioblastoma in vitro, 30th Annual Conference of the European Society for Biomaterials in tandem with the 26thAnnual Conference of the German Society for Biomaterials (DGBM); September 9 to 13, 2019 (Dresden, Germany)

Genç H, Ryma M, Schneidereit D, Nadernezhad A, Groll J, Cicha I (2019) Pre-endothelialization of sacrificial microvessel structures for biofabrication of tissue models, 30th Annual Conference of the European Society for Biomaterials in tandem with the 26thAnnual Conference of the German Society for Biomaterials (DGBM); September 9 to 13, 2019 (Dresden, Germany)

Heid S, Detsch R, Boccaccini AR (2019) New Alginate-Based Composite Bioinks for Enhanced 3D Bioprinting; TERMIS EU Workshop 2019, August, 26 to 27 2019, (Nantes, France)

Kengelbach-Weigand A, Schmid R, Tasbihi K, Strissel PL, Strick R, Al-Abboodi M, An R, Robering JW, Eckstein M, Bäuerle T, Detsch R, Boccaccini AR, Dalton PD, Youssef A, Wolf K, Kremer AE, Boos AM, Bosserhoff A, Arkudas A, Horch RE (2019) The arteriovenous loop as 3D model for studying the interaction of ADSC and breast cancer cells, TERMIS EU Workshop 2019, 26th-27th Aug 2019, (Nantes, France)

Winkler S, Steiner D, Biggemann J, Fey T, Greil P, Körner C, Weisbach V, Meyer-Lindenberg A, Mutschall H, Arkudas A and Horch RE (2019) Intrinsic vascularization of ADSC-loaded hydrogel scaffolds in the rat AV loop model, The 11th EPSRC Meeting, 23-25 August 2019, Munich, Germany, Klinikum rechts der Isar, Technische Universität München (München, Germany)

Detsch R (2019) From the Fundamentals of Biofabrication towards Functional Tissue Models, 1st Heidelberg Workshop on 3D-Bioprinting, 18 July 2019 (Heidelberg, Germany).

Seibel J (2019) Bioorthogonal conjugation reactions for studying biological events, Gordon Research Conference Carbohydrates, Carbohydrate Synthesis and Research to Advance Glycobiology and Biomedicine June 23 – 28, 2019 (Hong Kong, China)

Jüngst T, Teßmar J, Dalton P, Groll J (2019) Bionik Development and Melt Electrowriting, Deutsches Zentrum für Luft-und Raumfahrt in Bonn, Workshop Additive Fertigung in der Raumfahrt. 28 May 2019 (Bonn, Germany)

Detsch R, Boccaccini AR (2019) Challenges in biofabrication of alginate-based bioinks for different biomedical approaches, Deutsches Zentrum für Luft-und Raumfahrt in Bonn, Workshop Additive Fertigung in der Raumfahrt. 28 May 2019 (Bonn, Germany)

Roshanbinfar K, Vogt L, Greber B, Diecke S, Boccaccini AR, Mohammadi Z, Mesgar AS, Dehghan MM, Oommen OP, Scheibel T, Hilborn J, Engel FB (2019) Electroconductive materials enhance maturation of hiPSC-derived cardiomyocytes in engineered cardiac tissues, TERMIS European Chapter Meeting 2019 27th – 31st May 2019, Rhodes, Greece Tissue Engineering Therapies: From Concept to Clinical Translation & Commercialisation

Salehi S (2019) Mimicking the osteon structure by biofabrication techniques, TERMIS European Chapter Meeting 2019 27th – 31st May 2019, Rhodes, Greece Tissue Engineering Therapies: From Concept to Clinical Translation & Commercialisation

Groll J (2019) 3D Printable Hydrogel-Bioinks: Rheological Implications and the Importance of Controlled Network Formation, TERMIS European Chapter Meeting 2019 27th -31st May 2019, Rhodes, Greece Tissue Engineering Therapies: From Concept to Clinical Translation & Commercialisation

Groll J (2019) Biofabrication – Chances, Challenges and Limits, Euro BioMAT 2019, 08 – 09 May 2019 (Jena-Weimar, Germany)

Kengelbach-Weigand A (2019) Das arteriovenöse Gefäßschleifenmodell als Tool für die Untersuchung der Interaktion von ADSC und Mammakarzinomzellen, 3. DAM Wissenschaftsakademie, 12 – 13 April 2019 (Erlangen, Germany)

Schmid R (2019) Analyse von Tumor dormancy und Progression in biofabrizierten und in vivo vaskularisierten 3D-Modellen, 3. DAM Wissenschaftsakademie, 12 – 13 April 2019 (Erlangen, Germany)

Heltmann-Meyer S (2019) Biofabrikation zellularisierter und im AV Loop vaskularisierter Gewebecontainer für die Transplantation wirkstoffproduzierender Zellen, 3. DAM Wissenschaftsakademie, 12 – 13 April 2019 (Erlangen, Germany)

Schrüfer S (2019) Rheology of alginates – some new insights, 9th Scientific Seminar of the North Bavarian Biomaterials Alliance (NBBA) was held at the Department of Materials Science and Engineering, University of Erlangen-Nuremberg, 21 February 2019 (Erlangen, Germany)

Schrüfer S (2019) Rheology on alginates, DGM Regionalforum Erlangen, „Metallische Werkstoffe für die Mobilität“ 4 February 2019, (Erlangen, Germany)

Salehi S, Kharaziha M, Ionov L, Scheibel T (2019) Composite ink development from bioceramic nanoparticles for bone tissue regeneration, 9th biennial Australian Colloid and Interface Symposium (ACIS) 3 – 7 February 2019 (Hobart, Tasmania, Australia)

Scheibel T (2019) Drug delivery vehicles based on engineered spider silk protein, 9th biennial Australian Colloid and Interface Symposium (ACIS) 3 – 7 February 2019 (Hobart, Tasmania, Australia)

Lang G (2019) Bio-selective bacteriostatic and fungistatic surfaces made of recombinant spider silk proteins, 9th biennial Australian Colloid and Interface Symposium (ACIS) 3 – 7 February 2019 (Hobart, Tasmania, Australia)

Trossmann V (2019) Recombinant spider silk proteins for cardiac tissue engineering, 9th biennial Australian Colloid and Interface Symposium (ACIS) 3 – 7 February 2019 (Hobart, Tasmania, Australia)

Sonnleitner D (2019) Poly-ε-caprolactone (PCL) particle – hydrogel colloid system for enhanced cell interaction, 9th biennial Australian Colloid and Interface Symposium (ACIS) 3 – 7 February 2019 (Hobart, Tasmania, Australia)

Poster 2019

Fischer L, Karakaya E, Müller S, Schrüfer S, Distler T, Schubert DW, Gekle S, Fabry B, Boccaccini AR, Detsch R, Thievessen I (2019) Shear stress and cellular behaviour in 3 D biofabrication assays, Goodbye Flat Biology: Advancing 3D-based Models for Cancer Biology and Drug Discovery – 10.-13.11.2019 (Berlin, Germany)

Schmid R, Schmidt SK, Hazur J, Detsch R, Boccaccini AR, Horch RE, Bosserhoff AK, Arkudas A, Kengelbach-Weigand A (2019) Comparison of hydrogels for the development of well defined 3D cancer models of breast cancer and melanoma, 4th EACR Conference on Goodbye Flat Biology, Berlin, Germany, 10.-13. November 2019

Schmidt SK, Schmid R, Arkudas A, Kengelbach-Weigand A, Bosserhoff AK (2019) 3D-Bioprinting of melanoma cells with commercially available matrices, 4th EACR Conference on Goodbye Flat Biology, Berlin, Germany, 10.-13. November 2019

Heid S, Detsch R, Boccaccini AR (2019) Is There an Optimum in the Design of Alginate-Based Composite Bioinks for 3D Bioprinting Regarding the Filler Concentration? Annual Conference of the International Society for Biofabrication (ISBF), 20-22 October 2019 (Columbus, Ohio, USA)

Karakaya E, Hazur J, Teßmar J, Boccaccini AR, Detsch R(2019) How to Determine a Suitable Sodium Alginate for the Fabrication of Standardized Alginatedialdehyde-Gelatin crosslinked Hydrogels in Biofabrication Approaches? Annual Conference of the International Society for Biofabrication (ISBF), 20-22 October 2019 (Columbus, Ohio, USA)

Altmann S, Mut J, Wolf N, Bechold J, Jakob F, Seibel J, Ebert R (2019) Glycoengineering as a tool to control the behavior of mesenchymal stem cells in biofabrication processes, 22nd European Congress on Alternatives to Animal Testing, 10-13 October 2019 (Linz, Austria)

Schmidt S, Mancini IAD, Boeck T, Abinzano F, Mensinga F, Hauptstein J, Tessmar J, van Weeren PR , Malda J, Groll J, Levato R, Blunk T (2019) EUREKA! Symposium, 9th and 10th October, 2019, Rudolf Virchow Center, (Würzburg, Germany)

Müller SJ, Bezold C, Gekle S (2019) Numerical Investigation of Cell Deformation during Bioprinting Processes, Annual workshop of the Franco-German Doctoral School, University of Bayreuth, 30th Sep and 1st Oct 2019 (Bayreuth, Germany)

Grummel N, Mark C, Böhringer D, Horder H, Strissel P, Strick R , Blunk T, Fabry B (2019) Invasion, migration and force generation of primary epithelial and mesenchymal breast cancer cells, 10th Physics of Cancer –  25-27 September 2019 (Leipzig, Germany)

Schrüfer S, Schubert DW (2019) Revealing critical model parameters for predicting the bioprintability of hydrogel systems, 16th biennial Bayreuth Polymer Symposium 2019 – 22.-24.09.2019 (Bayreuth, Germany)

Scheuring RG, Dogan L, Groll J, Ergün S (2019) 3D Printing of vascular wall-resident stem cells into tubular structures, 30th Annual Conference of the European Society for Biomaterials in tandem with the 26thAnnual Conference of the German Society for Biomaterials (DGBM); September 9 to 13, 2019 (Dresden, Germany)

Paulus I, Bloehbaum J, Tessmar J, Groll J (2019) Visible Light Cross-linked Poly(2-oxazoline) (POx)-based Hydrogels via Thiol-Ene Reaction, 30th Annual Conference of the European Society for Biomaterials in tandem with the 26thAnnual Conference of the German Society for Biomaterials (DGBM); September 9 to 13, 2019 (Dresden, Germany)

Herbig J, Shan J, Jüngst T, Albrecht K, Groll J (2019) Microgel based bioinks, 30th Annual Conference of the European Society for Biomaterials in tandem with the 26thAnnual Conference of the German Society for Biomaterials (DGBM); September 9 to 13, 2019 (Dresden, Germany)

Allen V, Gunselmann U, Schubert DW (2019) Revealing novel power laws and quantization in electrospinning considering jet splitting – Experimental, 30th Annual Conference of the European Society for Biomaterials in tandem with the 26thAnnual Conference of the German Society for Biomaterials (DGBM); September 9 to 13, 2019 (Dresden, Germany)

Janzen D, Bakirci E, Wieland A, Strissel PL, Strick R, Dalton PD, Villmann C (2019) Neuronal Networks in 3D Matrix Composites, 30th Annual Conference of the European Society for Biomaterials in tandem with the 26thAnnual Conference of the German Society for Biomaterials (DGBM); September 9 to 13, 2019 (Dresden, Germany)

Altmann S, Mut J, Wolf N, Bechold J, Jakob F, Seibel J, Ebert R (2019) Glycoengineering as a tool to control the behavior of mesenchymal stem cells in biofabrication processes, 30th Annual Conference of the European Society for Biomaterials in tandem with the 26thAnnual Conference of the German Society for Biomaterials (DGBM); September 9 to 13, 2019 (Dresden, Germany)

Schrüfer S, Schubert DW (2019) Revealing critical model parameters for predicting the bioprintability of hydrogel systems, 30th Annual Conference of the European Society for Biomaterials in tandem with the 26thAnnual Conference of the German Society for Biomaterials (DGBM); September 9 to 13, 2019 (Dresden, Germany)

Hazur J, Kaschta J, Schubert DW, Detsch R, Boccaccini AR (2019) Rheological examintation and 3D bioprinting of internally pre-crosslinked alginate bioinks, 30th Annual Conference of the European Society for Biomaterials in tandem with the 26thAnnual Conference of the German Society for Biomaterials (DGBM); September 9 to 13, 2019 (Dresden, Germany)

Heid S, Detsch R, Boccaccini AR (2019) Alginate-Based Composite Bioinks for 3D Biofabrication, 30th Annual Conference of the European Society for Biomaterials in tandem with the 26thAnnual Conference of the German Society for Biomaterials (DGBM); September 9 to 13, 2019 (Dresden, Germany)

Karakaya E, Teßmar J, Boccaccini AR, Detsch R (2019) Evaluation of the Biopolymer Modification for the Reproducible Production of Alginate-based Bioinks, 30th Annual Conference of the European Society for Biomaterials in tandem with the 26thAnnual Conference of the German Society for Biomaterials (DGBM); September 9 to 13, 2019 (Dresden, Germany)

Schrüfer S, Schubert DW (2019) Shear rheology of hydrogels – some new insights, 6th international symposium Interface Biology of Implants – IBI2019, 8 – 10 May 2019 (Warnemünde, Germany)

Schrüfer S, Schubert DW (2019)  Revealing critical model parameters for predicting the bioprintability of hydrogel systems, Nordic Polymer Days 2019 5 – 7 June 2019 (Trondheim, Norway)

Bakirci E, Dahri O, Ceballos E, Hrynevich A, Groll J, Schäfer N, Villmann C, Dalton PD(2019) Design and Development of a Melt Electrowritten in vitro Radial Migration Assay, TeRMIS European Chapter Meeting 2019 27th-31st May 2019, Tissue Engineering Therapies: From Concept to Clinical Translation & Commercialisation (Rhodes, Greece)

Salehi S (2019) Electrospun Stimuli-Responsive Mats for Muscle Tissue Regeneration, TeRMIS European Chapter Meeting 2019 27th-31st May 2019, Tissue Engineering Therapies: From Concept to Clinical Translation & Commercialisation (Rhodes, Greece)

Altmann S, Mut J, Wolf N, Bechold J, Jakob F, Seibel J, Ebert R (2019) Glycoengineering as a tool to control the behavior of mesenchymal stem cells in biofabrication processes, 46th European Calcified Tissue Society Congress, 11 – 14 May 2019 (Budapest, Hungary)

Hahn L, Beudert M, Lorson T, Lühmann T, Luxenhofer R (2019) Post-polymerization modification of thermogelling poly(2-oxazoline)/poly(2-oxazine) based hydrogels ensuring biocompatibility and temporal mechanical control, European Polymer Federation (EPF) Congress 9-14 June 2019 (Hersonissos, Crete, Greece)

Müller SJ, Bezold C, Gekle S (2019) Numerical Investigation of Cell Deformation during Bioprinting Processes, DPG-Frühjahrstagung 2019, 31 March – 5 April 2019, (Regensburg, Germany)

 

Publications 2018

An R, Schmid R, Klausing A, Robering JW, Weber M, Bauerle T, Detsch R, Boccaccini AR, Horch RE, Boos AM, Weigand A, Proangiogenic effects of tumor cells on endothelial progenitor cells vary with tumor type in an in vitro and in vivo rat model, FASEB J. 32(10) (2018) 5587-5601. (C03)

Bock T, Schill V, Krahnke M, Steinert AF, Tessmar J, Blunk T, Groll J, TGF-beta1-Modified Hyaluronic Acid/Poly(glycidol) Hydrogels for Chondrogenic Differentiation of Human Mesenchymal Stromal Cells, Macromol. Biosci. 18(7) (2018) 1700390. (A02)

Engel FB, Funktionale Gewebemodelle: Neue Materialien für die Herzgewebeersatztherapie, connexi – das Konferenzmagazin, connexi Kardiologie, Ausgabe 8-2018 The Paideia Group GmbH 8 (2018). (C01)

Groll J, Burdick JA, Cho DW, Derby B, Gelinsky M, Heilshorn SC, Jungst T, Malda J, Mironov VA, Nakayama K, Ovsianikov A, Sun W, Takeuchi S, Yoo JJ, Woodfield TBF, A definition of bioinks and their distinction from biomaterial inks, Biofabrication 11(1) (2018) 013001. (A06, B02, B04)

Gutmann M, Braun A, Seibel J, Luhmann T, Bioorthogonal Modification of Cell Derived Matrices by Metabolic Glycoengineering, ACS Biomater Sci Eng 4(4) (2018) 1300-1306. (A03, B05)

Hochleitner G, Fursattel E, Giesa R, Groll J, Schmidt HW, Dalton PD, Melt Electrowriting of Thermoplastic Elastomers, Macromol. Rapid Commun. 39(10) (2018) 1800055. (A04)

Lorson T, Lubtow MM, Wegener E, Haider MS, Borova S, Nahm D, Jordan R, Sokolski-Papkov M, Kabanov AV, Luxenhofer R, Poly(2-oxazoline)s based biomaterials: A comprehensive and critical update, Biomaterials 178 (2018) 204-280. (A03)

Nait-Ouhra A, Guckenberger A, Farutin A, Ez-Zahraouy H, Benyoussef A, Gekle S, Misbah C, Lateral vesicle migration in a bounded shear flow: Viscosity contrast leads to off-centered solutions, Phys. Rev. Fluids 3(12) (2018) 123601. (B07)

Ortiz-Soto ME, Ertl J, Mut J, Adelmann J, Le TA, Shan J, Tessmar J, Schlosser A, Engels B, Seibel J, Product-oriented chemical surface modification of a levansucrase (SacB) via an ene-type reaction, Chem. Sci. 9(24) (2018) 5312-5321. (B05) Front Cover Picture for Chemical Science              Press Release

Roshanbinfar K, Vogt L, Greber B, Diecke S, Boccaccini AR, Scheibel T, Engel FB, Electroconductive Biohybrid Hydrogel for Enhanced Maturation and Beating Properties of Engineered Cardiac Tissues, Adv. Funct. Mater. 28(42) (2018).  (C01)

Rottensteiner-Brandl U, Detsch R, Sarker B, Lingens L, Kohn K, Kneser U, Bosserhoff AK, Horch RE, Boccaccini AR, Arkudas A, Encapsulation of Rat Bone Marrow Derived Mesenchymal Stem Cells in Alginate Dialdehyde/Gelatin Microbeads with and without Nanoscaled Bioactive Glass for In Vivo Bone Tissue Engineering, Materials (Basel) 11(10) (2018) 1880. (C04, A01, C03)

Ruther F, Distler T, Boccaccini AR, Detsch R, Biofabrication of vessel-like structures with alginate di-aldehyde-gelatin (ADA-GEL) bioink, J. Mater. Sci.: Mater. Med. 30(1) (2018) 8. (B06, A01)

Stafiej P, Küng F, Kruse FE, Schubert DW, Fuchsluger TA, Mechanical and Optical Properties of PCL Nanofiber Reinforced Alginate Hydrogels for Application in Corneal Wound Healing, Biomater Med Appl 2(2) (2018). (A07)

Steiner D, Lingens L, Fischer L, Kohn K, Detsch R, Boccaccini AR, Fey T, Greil P, Weis C, Beier JP, Horch RE, Arkudas A, Encapsulation of Mesenchymal Stem Cells Improves Vascularization of Alginate-Based Scaffolds, Tissue Eng Part A 24(17-18) (2018) 1320-1331. (C03, C04, A01, B06, B03) Front Cover for Tissue Engineering Part A

Weigand A, Horch RE, Boos AM, Beier JP, Arkudas A, The Arteriovenous Loop: Engineering of Axially Vascularized Tissue, Eur. Surg. Res. 59(3-4) (2018) 286-299. (C03, C04)

Weis M, Shan J, Kuhlmann M, Jungst T, Tessmar J, Groll J, Evaluation of Hydrogels Based on Oxidized Hyaluronic Acid for Bioprinting, Gels 4(4) (2018) 82. (A02)

Presentations 2018

Friedrich O (2018) Taking a deep look’ – Advanced 2-Photon Technologies to study Cell-Matrix Architecture in Tissue Engineering, Regenerative Medicine and  Organ Disease, Special Seminar, The University of Sydney, invited speaker, 12 December 2018 (Sydney, Autralia)

Groll J (2018) Biofabrication research at FMZ: from solution electrospun meshes to thiol-ene cross-linked hydrogel-bioinks, International Conference on Additive Manufacturing and Biomanufacturing,  2-4 December 2018 (Beijing, China)

Boccaccini AR (2018) Bioinks containing reactive fillers in biofabrication approaches, Invited presentation at West Pomeranian University of Technology, 22 November 2018 (Szczecin, Poland)

Boccaccini AR (2018) Bioactive Materials and Biofabrication for Biomedical Applications: Progress and Challenges, Invited speaker at Scientific Workshop 2018, Rostock University Medicine (Universitätsmedizin Rostock), 16 November 2018 (Rostock, Germany)

Groll J (2018) Bio-ink development for Biofabrication, International Conference on Emerging Healthcare Materials, 15-16 November 2018 (Seoul, South-Korea)

Engel FB (2018) TRR 225: Biofabrikation von funktionalen Gewebemodellen, Invited speaker at 27. Jahrestagung der Deutschen Transplantationsgesellschaft (DTG 2018), on 7-10 November 2018 (Berlin, Germany)

Boccaccini AR (2018) Bioactive materials and biofabrication for tissue engineering: achievements and challenges, Invited presentation at Polytechnic School (Escuela Politecnica Superior, EPS), University of Seville, 31 October 2018 (Seville, Spain)

Groll J (2018) SFB/TRR 225: From the Fundamentals of Biofabrication to Functional Tissue Models, International Conference on Biofabrication (ISBF) 2018, 28-31 October 2018 (Würzburg, Germany)

Engel FB (2018) New scaffolds for cardiac repair, Invited presentation at: International Conference on Biofabrication (ISBF) 2018, 28-31 October 2018 (Würzburg, Germany)

Roshanbinfar K (2018) Electroconductive Biohybrid Hydrogel for Enhanced Maturation and Beating Properties of Engineered Cardiac Tissues, Invited presentation at: International Conference on Biofabrication (ISBF) 2018, 28-31 October 2018 (Würzburg, Germany)

Ryma M, Blöhbaum J, Böhm C, Genc H, Dalton P, Cicha I, Groll J (2018) Prevascularization of Tissue Engineered Constructs via Melt Electrowriting of Thermoresponsive Poly(2-Oxazoline)s, International Conference on Biofabrication (ISBF) 2018, 28-31 October 2018 (Würzburg, Germany)

Luxenhofer R (2018) Pseudo-polypeptides forming thermoresponsive, biocompatible bioinks, International Conference on Biofabrication (ISBF) 2018, 28-31 October 2018 (Würzburg, Germany)

Boccaccini AR (2018) Development of composite bioinks incorporating bioreactive inorganic particles, Invited presentation at: International Conference on Biofabrication (ISBF) 2018, 28-31 October 2018 (Würzburg, Germany)

Detsch R, Distler T, Ruther F, Boccaccini AR (2018) Engineering of Vessel Grafts using Alginate di-aldehyde – Gelatin Bioink, International Conference on Biofabrication (ISBF) 2018, 28-31 October 2018 (Würzburg, Germany)

Scheibel T (2018) Biopolymer-based materials, Gesellschaft Deutscher Chemiker e.V. GDCh-Vortrag/Hamburg 25-26 October 2018 (Hamburg, Germany)

Scheibel T (2018) Was Spider-Man besser wissen sollte… Landesamt für Gesundheit 23 October 2018 (Erlangen, Germany)

Scheibel T (2018) Biofabrication with bioinks made of rekombinant spider silk, N.I.C.E. Conference 2018, The 4th International Conference on Bioinspired and Biobased Chemistry & Materials, 14-17 October 2018 (Nice, France)Boccaccini AR (2018) Biofabrication with alginate di-aldehyde / gelatin (ADA/GEL) hydrogels: progress, applications and challenges, Oral presentation at: Biomaterials and Novel Technologies for Healthcare, 2nd International Biennial Conference BioMaH, Frascati, 8-11 October, 2018 (Rome, Italy)

Lühmann T (2018) Nanomechanics of fibroblast growth factor 2 – heparin at physiological and pathophysiological conditions: Implications for drug delivery, Annual meeting of the DPhG. Hamburg, 4-6 October 2018 (Hamburg, Germany)

Scheibel T (2018) Development of spider silk applications, Siemens Healthcare GmbH 01 October 2018 (Kemnath, Germany)

Groll J (2018) Hydrogels as Bioinks for Biofabrication, MSE conference, 26-28 September 2018, (Darmstadt, Germany)

Detsch R, Liverani L, Boccaccini AR (2018) Biomaterials research in Erlangen: from bioactive materials to tissue scaffolds and biofabrication, UMN-FAU Workshop, 19-20 September 2018 (University Minnesota, USA)

Weigand A, Boos AM, An R, Strissel PL, Schmid R, Robering JW, Al-Abboodi M, Detsch R, Dalton PD, Youssef A , Boccaccini AR, Beckmann MW, Bäuerle T, Strick R, Horch RE (2018) Vom Tissue Engineering zum Tumor Engineering, 49. Jahrestagung der Deutsche Gesellschaft der Plastischen, Rekonstruktiven und Ästhetischen Chirurgen DGPRÄC & 23. Jahrestagung der Vereinigung der Deutschen Ästhetisch Plastischen Chirurgen (VDÄPC), 13-15 September 2018 (Bochum, Germany)

Groll J (2018) Melt Electro Writing at the Department of Functional Materials in Medicine and Dentistry, Annual Meeting of the European Society for Biomaterials,  10-13 September2018 (Maastricht, Netherlands)

Luxenhofer, R (2018) Pseudo-Polypeptides: From surface modification to drug delivery and 3D bioprinting, Tomas Bata University, 19 September 2018 (Zlín, Czech Republic)

Weigand A, Beier JP, Schmid R, Robering JW, Cai A, Arkudas A, Horch RE, Boos A (2018) Vascularized Tissue Engineering Using the Arteriovenous Loop – The Path from the Small Animal Model to the Preclinical Large Animal Model, 2018 TERMIS World Congress, 4-7 September 2018 (Kyoto, Japan)

Boccaccini AR (2018) Bioactive materials and biofabrication for tissue engineering applications. Invited seminar at: CONICET Laboratory of Integration of Cellular Signals at the Institute for Histology and Embryology, Faculty of Medicine, National University of Cuyo (UNCUYO), 27 August 2018 (Mendoza, Argentina)

Engel FB (2018) New scaffolds for cardiac repair, ESC Congress 2018 (European Cardiac Society) 25-29 August 2018 (Munich, Germany)

Peddi A, Steiner D, Weigand A, Lingens L, Fischer L, Köhn K, Detsch R, Boccaccini AR, Fey T, Greil P, Weis C, Beier JP, Horch RE, Arkudas A. (2018) Encapsulation of mesenchymal stem cells improves vascularization of alginate-based scaffolds,  The 10th EPSRC Meeting, 23-25 August 2018 (Hamburg, Germany)

Heltmann-Meyer S, Steiner D, Lang G, Winkler S, Fischer L, Fey T, Greil P, Scheibel T, Horch RE, Arkudas A. (2018) Intrinsic Vascularization of Recombinant eADF4(C16) Spider Silk fibrous matrices in the Arteriovenous Loop Model, The 10th EPSRC Meeting, 23-25 August 2018 (Hamburg, Germany)

Boccaccini AR (2018) Bioactive materials and biofabrication for bone and soft tissue engineering, Invited lecture at: Justus-Liebig-University Giessen, Medical School, 19 July 2018 (Giessen, Germany)

Groll J (2018) Biofabrication: Status of the field and translational perspective, 3D-BioNET-working-event, 18 July 2018 (Freiburg im Breisgau, Germany)

Lühmann T (2018) Tissue painting: Methods and application, Living materials meeting, Tufts University, European centre, 9-12 July 2018 (Talloires, France)

Boccaccini AR (2018) Bioactive materials and biofabrication for tissue engineering: progress and challenges. Invited speaker at: Junior EUROMAT 2018 Conference, 8-12 July 2018 (Budapest, Hungary)

Scheibel T (2018) Engineering, processing and applications of structural proteins, UPAC und Büroeröffnung 1-5 July 2018 (Melbourne Cairns, Australia)

Seibel J (2018) Glycoengineering as a tool for visualizing and redesigning the human and bacterial cell surfaces, GlykoT 2018, The 11th International Symposium on Glycosyltransferases, 19-23 June 2018 (Qingdao, China)

Groll J (2018) Biotinten: 3D-Druckbare Hydrogele als Schlüssel zum BioPrinting, Materialinnovationen 2018 – Vom Material zur Innovation, Konferenz zur Materialforschung des BMBF, 4-6 June 2018, (München, Germany)

Luxenhofer, R (2018) Poly(2-oxazoline) amphiphiles: From ultra-high loaded polymer micelles to 3D bioprinting, Invited speaker at Advanced Functional Polymers for Medicine, 16-18 May (Montpellier, France)

Groll J (2018) Hydrogels as “Bio-inks” for Biofabrication, 2nd Theodore von Kármán – Discussion Conference on Materials for Life: Bioinspired and Biomimetic Hydrogels, 15-18 April 2018, (Bensberg, Germany).

Groll J (2018) Bioinks: Concepts, Rheological Considerations and Recent Trends, TERMIS workshop on 3D Printing in Musculoskeletal Tissue Engineering: Bioprinting in Action, 23 March 2018 (Warsaw, Poland)

Boccaccini AR (2018) Enhancing alginate based bioinks for biofabrication: the composites approach, Invited speaker at: 1st TERMIS-EU Workshop on “3D Printing in Musculoskeletal Tissue Engineering”, 22-23 March 2018 (Warsaw, Poland)

Lorson T, Jaksch S, Jüngst T, Groll J, Lühmann T, Luxenhofer R. (2018)  Nanostructured, thermoresponsive and biocompatible hydrogels based on Poly(2-oxazoline)s for 3D bioprinting and biofabrication, Joint DIPC, JCNS & SoftComp Workshop 2018: Functional Polymers, 19-21 March 2018 (San Sebastian, Spain)

Boccaccini A. (2018) Bioactive materials and biofabrication approaches for hard tissue regeneration, Invited speaker at: 2nd Sino-German Symposium on Reconstruction and Repair of Musculoskeletal Tissues, Mainz University Medical Center, 13-14 March 2018 (Mainz, Germany).

Groll J (2018) 3D-Druckbare Hydrogele als Tinten für die Biofabrikation, Thüringer Biomaterial Kolloquium, 13- 15 March 2018 (Zeulenroda, Germany)

Bezold C, Bächer C, Gekle S. (2018) Simulations of stem cells in microjets, Deutsche Physikalische Gesellschaft (DPG), DPG Spring Meeting Berlin, March 11-16, 2018 (Berlin, Germany)

Posters 2018

Reineke B, Hauschild S, Förster S (2018) Development of microfluidic devices for the encapsulation of cells, Jülich Soft Matter Days 2018 20-23 November 2018 (Jülich, Germany)

Detsch R, Boccaccini AR (2018) Advances in Biomaterials for Biofabrication: 3D Printing with Bioinks, “Tag der Technischen Fakultät” of the FAU Erlangen 16 November 2018 (Erlangen, Germany)

Schrüfer S, Himmler M, Schubert DW (2018) Shear rheology of nanofiber reinforced alginate solutions for bioprinting – establishing a basis , Jahrestagung der DGBM in Braunschweig 8-10 November 2018 (Braunschweig, Germany)

Beudert M, Hahn L, Lorson T, Deiwiks A, Luxenhofer R, Lühmann T (2018) Implementation of cell adhesion in thermogelling poly(2-oxazoline)-based hydrogels for their use as bioinks in bioprinting 6th Galenus Workshop. 6-8 November 2018 (Wuerzburg, Germany)

Salehi S, Ionov L, Scheibel T (2018) Bioactive Composite Ink for Bone Tissue Regeneration, Annual Conference of the International Society for Biofabrication (ISBF), 28-31 October 2018 (Würzburg, Germany)

Gensler M, Komma M, Heid S, Detsch R, Salehi S, Boccaccini AR, Hansmann J (2018) Bioreactor concepts for simultaneous printing of bioreactor and tissue equivalent, Annual Conference of the International Society for Biofabrication (ISBF), 28-31 October 2018 (Würzburg, Germany)

Janzen D, Schaefer N, Bakirci E, Dalton PD, Strissel PL, Villmann C (2018) 3D Electrophysiology in Matrix Composites, Annual Conference of the International Society for Biofabrication (ISBF), 28-31 October 2018 (Würzburg, Germany)

Mechau J, Frank A, Böhm C, Giesa R, Dalton PD, Schmidt HW (2018) Melt Electrowriting of water-swelling (AB)n segmented block copolymers, Annual Conference of the International Society for Biofabrication (ISBF), 28-31 October 2018 (Würzburg, Germany)

Schmidt S, Mancini IAD, Boeck T, Abinzano F, Mensinga A, Martini J, Tessmar J, van Weeren PR, Malda J, Groll J, Levato R, Blunk T (2018) Chondrogenic Differentiation of Mesenchymal Stem Cells and Articular Cartilage Progenitor Cells in a 3D Printable Hyaluronic Acid Hydrogel, Annual Conference of the International Society for Biofabrication (ISBF), 28-31 October 2018 (Würzburg, Germany)

Schneidereit D, Sulistio AA, Bröllochs A, Lu K, Distler T, Schürmann S, Detsch R, Dendorfer A, Boccaccini AR, Friedrich O (2018) 3D Tissue Substructure: Using Multi-Photon Excitation to Reveal Cellular 3D Morphology of Natural and Engineered Tissue in Depth, Annual Conference of the International Society for Biofabrication (ISBF), 28-31 October 2018 (Würzburg, Germany)

Beudert M, Hahn L, Lorson T, Deiwiks A, Luxenhofer R, Lühmann T (2018) Biofunctionalization of thermogelling poly(2-oxazoline)-based hydrogels by Diels Alder chemistry, Annual Conference of the International Society for Biofabrication (ISBF), 28-31 October 2018 (Würzburg, Germany)

Hahn L, Hüttner N, Deiwiks A, Lorson T, Lühmann T, Luxenhofer R (2018) Poly-(2-methyl-2-oxazoline) and thermoresponsive poly(-2-n-propyl-oxazine): Different architecture same viscoelastic profile?, Annual Conference of the International Society for Biofabrication (ISBF), 28-31 October 2018 (Würzburg, Germany)

Fischer L, Karakaya E, Distler T, Boccaccini AR, Fabry B, Detsch R, Thievessen I (2018) Concept studies of the application of reporter cells in biofabrication approaches, Annual Conference of the International Society for Biofabrication (ISBF), 28-31 October 2018 (Würzburg, Germany)

Fischer L, Karakaya E, Distler T, Grummel N, Boccaccini AR, Fabry B, Detsch R, Thievessen I (2018) Shear stress and cellular behaviour in 3 D biofabrication assays, 9th Annual Symposium “Physics of Cancer” 24-26 September 2018 (Leipzig, Germany)

Weigand A, Boos AM, An R, Strissel PL, Schmid R, Robering JW, Al-Abboodi M, Detsch R, Dalton PD, Youssef A , Boccaccini AR, Beckmann MW, Bäuerle T, Strick R, Horch RE (2018) From Tissue Engineering to Tumor Engineering –  Application of the arteriovenous loop model for the generation of a fully vascularized tumor in an animal model, 2018 TERMIS World Congress, 4-7 September 2018 (Kyoto, Japan)

Wieland A, Janzen D, Bakirci E, Schäfer N, Strissel PL, Strick R, Villmann C, Dalton P (2018) Ultra-soft Matrix Composites for 3D Neuroglia in vitro Research, Summer School “3D Printing Technologies”, 16-20 Jul 2018 (Würzburg, Germany)

Lorson T, Jüngst T, Jaksch S, Lühmann T, Luxenhofer R. (2018)  Biocompatible,Thermoresponsive, and Printable Poly(2-Oxazoline) Gels. Polymers: Design, Function and Application, 22–23 March 2018 (Barcelona, Spain)

Müller S, Gekle S. (2018) Multiple-relaxation-time Lattice Boltzmann Implementation of Non-Newtonian Fluids, Deutsche Physikalische Gesellschaft (DPG), DPG Spring Meeting Berlin,  11-16 March 2018 (Berlin, Germany)

  • Bioreaktor zur 3D-Geweberegeneration von Skelettmuskulatur (‚Tissue Regenerator‘), inventors: Oliver Friedrich (B08, Z02) Paul Ritter, Michael Haug, application number DE 10 2021 211 875, applicant FAU.
  • Verfahren und Messanordnung zum Ermitteln einer Fließeigenschaft eines Fluids “BERIT” (Best Elongation Rheology Investigative Testing), inventors: Dirk W. Schubert (A07), Paul Dalton (A04 and B01), Stefan Schrüfer (A07), DE application number: DE 10 2020 216 545.9., applicant FAU
  • „Kombiniertes 3D-Druck-Faserspinnen“, inventor: Leonid Ionov (A08), applicant: UBT
  • „Gel bildende Block-Polymere“, inventors: Lukas Hahn, Robert Luxenhofer from A03, application number EP 3 789 424 A1, applicant JMU.
  • “Inverse Thermogelling Polyoxazoline Copolymers”, inventors: Lukas Hahn, Robert Luxenhofer from A03, application number EP 21 16 4966.0, applicant JMU