Publikationen 2020

Hauptstein J, Böck T, Bartolf-Kopp M, Forster L, Stahlhut P, Nadernezhad A, Blahetek G, Zernecke-Madsen A, Detsch R, Jüngst T, Groll J, Teßmar J, Blunk T (2020) Hyaluronic Acid-Based Bioink Composition Enabling 3D Bioprinting and Improving Quality of Deposited Cartilaginous Extracellular Matrix, Adv. Healthcare Mater. 2020, 9, 2000737.

Winkler S, Mutschall H, Biggemann J, Fey T, Greil P, Körner C, Weisbach V, Meyer-Lindenberg A, Arkudas A, Horch RE, Steiner D (2020) HUVEC support bone formation of ADSC-loaded and 3D-printed osteogenic matrices in the AV loop model Tissue Engineering Part A VOL. 0, NO. ja 

Bächer C, Bender M, Gekle S (2020) Flow-accelerated platelet biogenesis is due to an elasto-hydrodynamic instability, PNAS

Müller SJ, Mirzahossein E, Iftekhar EN, Bächer C, Schrüfer S, Schubert DW, Fabry B, Gekle S (2020) Flow and hydrodynamic shear stress inside a printing needle during biofabrication. PLoS ONE 15(7): e0236371.

Distler A, Sulistio D, Schneidereit O, Friedrich R, Detsch, Boccaccini AR (2020) 3D printed oxidized alginate-gelatin bioink provides guidance for C2C12muscle precursor cell orientation and differentiation viashear stress during bioprinting, Biofabrication 12 (2020)045005.

Heid S, Boccaccini AR (2020) Advancing bioinks for 3D bioprinting using reactive fillers: A review, Acta Biomater. 2020 Jul 2;S1742-7061(20)30370-6.

Mutschall H, Winkler S, Weisbach V, Arkudas A, Horch RE, Steiner D (2020) Bone tissue engineering using adipose-derived stem cells and endothelial cells: Effects of the cell ratio. J Cell Mol Med. 2020 Jun;24(12):7034-7043.

Schubert DW (2020) Novel theoretical self-consistent mean-field approach to describe the conductivity of carbon fiber filled thermoplastics—PART III—Application of the concept to mechanical properties of composites and polymer solutions. Adv. Eng. Mater. 2020

Müller-Deubert S , Ege C, Krug M, Meißner-Weigl J, Rudert M, Bischof O, Jakob F, Ebert R (2020) Phosphodiesterase 10A Is a Mediator of Osteogenic Differentiation and Mechanotransduction in Bone Marrow-Derived Mesenchymal Stromal Cells, Stem Cells International Volume 2020, Article ID 7865484, 11 pages

Schrüfer S, Sonnleitner D, Lang G, Schubert, DW (2020) A Novel Simple Approach to Material Parameters from Commonly Accessible Rheometer Data. Polymers, 12(6), 1276.

Hazur J, Detsch R, Karakaya E, Kaschta J, Tessmar J, Schneidereit D, Friedrich O, Schubert D, Boccaccini AR (2020) Improving alginate printability for biofabrication: establishment of a universal and homogeneous pre-crosslinking technique, Biofabrication in press

Kramer JPM, Aigner TB, Petzold J, Roshanbinfar K, Scheibel T, Engel FB (2020) Recombinant spider silk protein eADF4(C16)-RGD coatings are suitable for cardiac tissue engineering, Sci Rep 10, 8789

Mancini IAD, Schmidt S, Brommer H, Pouran B, Schäfer S, Tessmar J, Mensinga A, van Rijen MHP, Groll J, Blunk T, Levato R, Malda J, van Weeren PR (2020) A composite hydrogel-3D printed thermoplast osteochondral anchor as an example for a zonal approach to cartilage repair: in vivo performance in a long-term equine model; Biofabrication

Hu C, Hahn L, Yang M, Altmann A, Stahlhut P, Groll J, Luxenhofer R (2020) Improving Printability of a Thermoresponsive Hydrogel Biomaterial Ink by Nanoclay Addition, ChemRxiv. Preprint.

Mark C, Grundy TJ, Strissel PL, Böhringer D, Grummel N, Gerum R, Steinwachs J, Hack CC, Beckmann MW, Eckstein M, Strick R, O’Neill GM, Fabry B (2020) Collective forces of tumor spheroids in three-dimensional biopolymer networks, Elife. 2020 Apr 30;9. pii: e51912

Mirzaei Z, Kuth S, Schubert DW, Detsch R, Roether J, Blunk T, Kordestani SS, Boccaccini AR (2020) Preparation and Characterization of Electrospun Blend Fibrous Polyethylene Oxide:Polycaprolactone Scaffolds to Promote Cartilage Regeneration, Advanced Engineering Materials.

Mertgen AS, Trossmann VT, Guex AG, Maniura-Weber K, Scheibel T, Rottmar M (2020) Multifunctional Biomaterials: Combining Material ModificationStrategies for Engineering of Cell-Contacting Surfaces, ACS Appl. Mater. Interfaces 2020, 12, 21342−21367

Friedrich O (2020) Synthetic material could help heal injured tendons and ligaments, The University of Sydney New 14.04.2020

Nadernezhad A, Forster L, Netti F, Adler-Abramovich, L,Teßmar J, Groll J (2020) Rheological analysis of the interplay between the molecular weight, Polym J (2020)

Dalton PD, Woodfield TBF, Mironov V, Groll J (2020) Advances in Hybrid Fabrication toward Hierarchical Tissue Constructs, Adv.Sci. 2020, 1902953

Janzen D, Bakirci E, Wieland A, Martin C, Dalton PD, Villmann C (2020) Cortical Neurons form a Functional Neuronal Network in a 3D Printed Reinforced Matrix, Adv. Healthcare Mater.2020, 1901630

No YJ, Tarafder S, Reischl B, Ramaswamy Y, Dunstan C, Friedrich O, Lee C, Zreiqat H (2020) High-strength fiber-reinforced composite hydrogel scaffolds as biosynthetic tendon graft material, ACS Biomater. Sci. Eng. 2020, 6, 4, 1887-1898

Lehmann M, Müller SJ, Gekle S (2020) Efficient viscosity contrast calculation for blood flow simulations using the lattice Boltzmann method, Int J Numer Meth Fluids. 2020;1–15.

Lorson T, Ruopp M, Nadernezhad A, Eiber J, Vogel U, Juengst T, Lühmann T (2020) Sterilization Methods and Their Influence on Physicochemical Properties and Bioprinting of Alginate as a Bioink Component, ACS Omega 2020, 5, 12, 6481–6486

Hahn L, Maier M, Stahlhut P, Beudert M, Flegler V, Forster S, Altmann A, Töppke F, Fischer K, Seiffert S, Böttcher B, Lühmann T, Luxenhofer R (2020) Inverse Thermogelation of Aqueous Triblock Copolymer Solutionsinto Macroporous Shear-Thinning 3D Printable Inks, ACS Applied Materials & Interfaces

Bergera C, Bjørlykke Y, Hahn L, Mühlemann M, Kressa S, Walles H, Luxenhofer R, Ræder H, Metzger M, Zdziebloae D (2020) Matrix decoded – A pancreatic extracellular matrix with organ specific cues guiding human iPSC differentiation, Biomaterials

Herrmann M, Engelke K, Ebert R, Müller-Deubert S, Rudert M, Ziouti F, Jundt F, Felsenberg D, Jakob F (2020) Interactions between Muscle and Bone—Where Physics Meets Biology, Biomolecules 2020, 10(3), 432

Dranseikiene, D., Schrüfer, S., Schubert, D.W., Reakasame S, Boccaccini AR (2020) Cell-laden alginate dialdehyde–gelatin hydrogels formed in 3D printed sacrificial gel, J Mater Sci: Mater Med 31, 31 (2020).

Müller SJ, Weigl F, Bezold C, Bächer C, Albrecht K, Gekle S (2020) A hyperelastic model for simulating cells in flow, arXiv:2003.03130 [physics.bio-ph]

Frischholz S, Berberich O, Böck T, Meffert RH, Blunk T (2020) Resveratrol counteracts IL‐1β‐mediated impairment of extracellular matrix deposition in 3D articular chondrocyte constructs,  J Tissue Eng Regen Med. 2020;14: 897–908.

Hoefner C, Muhr C, Horder H, Wiesner M, Wittmann K, Lukaszyk D, Radeloff K, Winnefeld M, Becker M, Blunk T, Bauer-Kreisel P (2020) Human Adipose-Derived MesenchymalStromal/Stem Cell Spheroids Possess High Adipogenic Capacity and Acquire an Adipose Tissue-like Extracellular Matrix Pattern, Tissue Eng. Part A 2020 Feb 19.

Levato R, Jungst T, Scheuring RG, Blunk T, Groll J, Malda J (2020) From Shape to Function: The Next Step in Bioprinting, Adv. Mater. 2020, 1906423

Salehi S, Koeck K, Scheibel T (2020) Spider Silk for Tissue Engineering Applications, Molecules. 2020 Feb 8;25(3):737.

Sun W, Starly B, Daly AC, Burdick JA, Groll J, Skeldon G, Shu W, Sakai Y, Shinohara M, Nishikawa M (2020) The bioprinting roadmap, Biofabrication12 022002

Tolksdorf J, Horch RE, Grüner JS, Schmid R, Kengelbach-Weigand A, Schubert DW, Werner S, Schneidereit D, Friedrich O, Ludolph I (2020) Size matters-in vitro behaviour of human fibroblasts on textured silicone surfaces with different pore sizes, J Mater Sci Mater Med. 31(2):23. 

Russell CS, Mostafavi A, Quint JP, Panayi AC, Baldino K, Williams TJ, Daubendiek JG, Sánchez VH, Bonick Z, Trujillo-Miranda M, Shin SR, Pourquie O, Salehi S, Sinha I, Tamayol A (2020) In Situ Printing of Adhesive Hydrogel Scaffolds for the Treatment of Skeletal Muscle Injuries, ACS Appl. Bio Mater. 2020, 3, 3, 1568–1579

Aigner TB, Haynl C, Salehi S, O’Connor A, Scheibel T (2020) Nerve guidance conduit design based on self-rolling tubes, Materials Today Bio Volume 5, January 2020, 100042

Präsentationen 2020

Detsch R (2020) Challenges and Limits of Bioprinting to Generate Functional Tissue Models 02.07.2020, Virtuelle MedtecLIVE 2020  MedtecLIVE 2020 & MedTech Summit GO VIRTUAL! 30. Juni bis 02. Juli 2020 https://www.medteclive.com/de/aussteller-programm

Hauptstein J, Bartolf-Kopp M, Forster L, Detsch R, Jüngst T, Groll J, Teßmar J, Blunk T (2020) Hyaluronic Acid-based Bioink Composition Enabling 3D Bioprinting and ImprovingQuality of Deposited Cartilaginous Extracellular Matrix, 5th Bioinspired Materials 2020 Conference, 16 – 19 March 2020 – Web conference

Hazur J, Geske M, Esper L, Boccaccini  AR (2020) Tailoring mechanical properties and degradation behavior of alginate dialdehyde-gelatin (ADA-GEL) hydrogels, 5th Bioinspired Materials 2020 Conference, 16 – 19 March 2020 – Web conference

Nadernezhad A, Ryma M, Genc H, Cicha I, Groll J (2020) Design of pre-endothelialized microvascular structures for biofabrication of in vitro tissue models, 5th Bioinspired Materials 2020 Conference, 16 – 19 March 2020 – Web conference

Trossmann V, Esser T, Döbl A, Petzold J, Aigner T, Engel F, Scheibel  T (2020) Recombinant spider silk proteins for cardiac tissue engineering, 5th Bioinspired Materials 2020 Conference, 16 – 19 March 2020 – Web conference

Janzen D, Bakirci E, Wieland A, Strissel PL, Strick R, Dalton PD, VIllmann C (2020) Neural networks in 3D printed fiber-reinforced hydrogels, 5th Bioinspired Materials 2020 Conference, 16 – 19 March 2020 – Web conference

Lang G, Kumari S, DeSimone E, Trossmann V, Hudel M, Spengler C, Krämer N,Jacobs K, Scheibel T (2020) Recombinant Spider Silk Films and Hydrogels with intrinsic Bacteriostatic and Fungistatic Properties, 5th Bioinspired Materials 2020 Conference, 16 – 19 March 2020 – Web conference

Engel F (2020) 3D-Druck von funktionsfähigen Herzen- Wunsch und Wirklichkeit, Jahrestagung DGPK/DGTHG, 2. March 2020, Wiesbaden, Germany

Tessmar J (2020) 3D-Druck von Organen -Fiktion oder Wirklichkeit? 18.02.2020 Universitätsbund Würzburg Marktheidenfeld, im Raum 3.1 des Alten Rathauses, Marktplatz 24

Lang G, Kumari S, DeSimone E, Trossmann V, Hudel M, Spengler C, Krämer N,Jacobs K, Scheibel T (2020) Bio-selective bacteriostatic and fungistatic surfaces made of recombinant spider silk proteins, 8th International Conference on Nanoscience and Nanotechnology (ICONN 2020), 9 – 13 Febrauary 2020, Brisbane, Australia

Engel F (2020) 3D-Druck von funktionsfähigen Herzen- Wunsch und Wirklichkeit, Wintermeeting der AG17 der DGK, 24. Januar 2020, Düsseldorf

Poster 2020

Frank A, Mechau J, Bakirci E, Gumbel S, Giesa R, Groll J, Dalton PD, Schmidt HW (2020) Hydrogels based on (AB)n-segmented copolymers with polyethylene glycol segments for biofabrication, 5th Bioinspired Materials 2020 Conference, 16 – 19 March 2020 – Web conference

Schneidereit D, Distler T, Meinert C, Carlé B, Detsch R, Schürmann S, Hutmacher D, Boccaccini AR, Friedrich O (2020) Multiphoton Microscopy: A powerful tool to reveal cellular organization and morphology within bioengineered constructs in 3D, 5th Bioinspired Materials 2020 Conference, 16 – 19 March 2020 – Web conference

Forster L, Hauptstein J, Weichhold J, Nadernezhad A, Böhm TM, Zorn T, Schmidt S, Blunk T, Teßmar J (2020) Hyaluronic Acid based Hydrogel Platform with MultifuctionalCrosslinkers for the Controlled Differentiation of Mesenchymal Stem Cells, 5th Bioinspired Materials 2020 Conference, 16 – 19 March 2020 – Web conference

Horder H, Lasheras MG, Grummel N, Fabry B, Teßmar J, Bauer-Kreisel P, Blunk T (2020) 3D Bioprinting of Multicellular Adipose-derived Stromal Cell Spheroids in Hyaluronic Acid-based Bioinks, 5th Bioinspired Materials 2020 Conference, 16 – 19 March 2020 – Web conference

Karakaya E, Frank A, Forster L, Teßmar J, Schmidt HW, Boccaccini AR, Detsch R (2020) Evaluation of inkjet printing for ADA-PEG bioinks, 5th Bioinspired Materials 2020 Conference, 16 – 19 March 2020 – Web conference

Hahn L, Beudert M, Lorson T, Lühmann T, Luxenhofer R (2020) Poly(2-oxazoline)/Poly(2-oxazine) copolymers: From thermoresponsive hydrogels towards functional bioink formulations, 5th Bioinspired Materials 2020 Conference, 16 – 19 March 2020 – Web conference

Paulus I, Reineke B, Hauschild S, Förster S, Groll J (2020) Cell-loaded Microgels as mechanical Protection and controlled Microenvironment for Cells in Bioinks, 5th Bioinspired Materials 2020 Conference, 16 – 19 March 2020 – Web conference

Trossmann V, Steiner D, Heltmann-Meyer S, Winkler S, Amouei H, Wajant H, Fey T, Greil P, Scheibel T, Arkudas A, Horch RE, Establishment of a fiber-based and RGD-modified spider silk for the generation of a drug-producing tissue container, 5th Bioinspired Materials 2020 Conference, 16 – 19 March 2020 – Web conference

Döbl A, Herold H, Wohlrab S, Humenik M, Scheibel T (2020) Spider Silk-based carrier for controlled redox- and pH-triggered drug release, 5th Bioinspired Materials 2020 Conference, 16 – 19 March 2020 – Web conference

Müller C, Gensler M, Heid S, Boccaccini AR, Detsch R, Hansmann J, Salehi S (2020) Simultaneous printing of biofabricates and tailored bioreactors, 5th Bioinspired Materials 2020 Conference, 16 – 19 March 2020 – Web conference

Publikationen 2019

Liebscher J, Teßmar J, Groll J (2019) In Situ Polymer Analogue Generation of Azlactone Functions at Poly(oxazoline)s for Peptide Conjugation, Macromol. Chem. Phys. 2019, 1900500

Ortiz-Soto ME, Reising S, Schlosser A, Seibel J (2019) Structural and functional role of disulphide bonds and substrate binding residues of the human beta-galactoside alpha-2,3-sialyltransferase 1 (hST3Gal1) Scientific Reports volume 9, Article number: 17993

Hahn L, Maier M, Stahlhut P, Beudert M, Altmann A,  Töppke F, Lühmann T, Luxenhofer R (2019) Inverse Thermogelation of Aqueous Triblock Copolymer Solutions into Macroporous Shear-Thinning 3D Printable Inks, ChemRxiv. Preprint.

Lübtow MM, Lorson T, Finger T, Gröber-Becker FK, Luxenhofer R (2019) Combining ultra-high drug loaded micelles and shear-thinning, injectable hydrogel drug depots for prolonged drug-release. ChemRxiv 2019

Schmidt SK, Schmid R, Arkudas A, Kengelbach-Weigand A, Bosserhoff AK (2019) Tumor Cells Develop Defined Cellular Phenotypes After 3D-Bioprinting in Di fferent Bioinks, Cells 2019, 8, 1295

Apsite I, Uribe JM, Posada AF, Rosenfeldt S, Salehi S, Ionov L (2019) 4D Biofabrication of Skeletal Muscle Microtissues, Biofabrication. 2019 Oct 10

Schwedhelm I, Zdzieblo D, Apelt-Menzel A, Berger C, Schmitz T, Schuldt B, Franke A, Müller FJ, Pless O, Schwarz T, Wiedemann P, Walles H, Hansmann J (2019) Automated real-time monitoring of human pluripotent stem cell aggregation in stirred tank reactors, Scientific Reports volume 9, Article number: 12297

Rausch M, Böhringer D, Steinmann M, Schubert DW, Schrüfer S, Mark C, Fabry B (2019) Measurement of skeletal muscle fiber contractility with high-speed traction microscopy. bioRxiv (2019): 733451. 

Lübtow MM, Mrlik M, Hahn L, Altmann A, Beudert M, Lühmann T and Luxenhofer R (2019) Temperature-Dependent Rheological and Viscoelastic Investigation of a Poly(2-methyl-2-oxazoline)-b-poly(2-iso-butyl-2-oxazoline)-b-poly(2-methyl-2-oxazoline)-Based Thermogelling Hydrogel, J. Funct. Biomater. 2019, 10(3), 36

Distler T, Ruther F, Boccaccini AR, Detsch R (2019) Development of 3D Biofabricated Cell Laden Hydrogel Vessels and a Low-Cost Desktop Printed Perfusion Chamber for In Vitro Vessel Maturation, Macromol. Biosci.2019, 1900245

Kahl M, Gertig M, Hoyer P, Friedrich O, Gilbert DF (2019) Ultra-Low-Cost 3D Bioprinting: Modification and Application of an Off-the-Shelf Desktop 3D-Printer for Biofabrication, Front. Bioeng. Biotechnol., 31 July 2019

Roshanbinfar K, Mohammadi Z, Sheikh-Mahdi Mesgar A, Dehghan MM, Oommen OP, Hilborn J, Engel FB (2019) Carbon nanotube doped pericardial matrix derived electroconductive biohybrid hydrogel for cardiac tissue engineering, Biomater. Sci., 2019,7, 3906-3917 

Neubauer JW, Hauck N, Männel MJ, Seuss M, Fery A, Thiele J (2019) Mechanoresponsive Hydrogel Particles as a Platform for Three- Dimensional Force Sensing, ACS Applied Materials & Interfaces 2019, 11 (29), 26307-26313

Bächer C, Gekle S (2019) Computational modeling of active deformable membranes embedded in three-dimensional flows, Phys. Rev. E 99, 062418

Kengelbach-Weigand A, Tasbihi K, Strissel PL, Schmid R, Marques JM, Beier JP, Beckmann MW, Strick R, Horch RE, Boos AM (2019) Plasticity of patient-matched normal mammary epithelial cells is dependent on autologous adipose-derived stem cells. Sci Rep. 2019 Jul 24;9(1):10722.

Berberich O, Blöhbaum J,Hölscher-Doht S, Meffert RH, Teßmar J, Blunk T, Groll J (2019) Catechol-modified poly(oxazoline)s with tunable degradability facilitate cell invasion and lateral cartilage integration, Journal of Industrial and Engineering Chemistry Volume 80, 25 December 2019, Pages 757-769

Ostrovidov S, Salehi S, Costantini M, Suthiwanich K, Ebrahimi M, Sadeghian RB, Fujie T, Shi X, Cannata S, Gargioli C, Tamayol A, Dokmeci MR, Orive G, Swieszkowski W, Khademhosseini A (2019) 3D Bioprinting in Skeletal Muscle Tissue Engineering Small. 2019 Apr 23:e1805530

Schubert DW (2019) Revealing Novel Power Laws and Quantization in Electrospinning Considering Jet Splitting—Toward Predicting Fiber Diameter and Its Distribution. Macromolecular Theory and Simulations (2019): 1900006.

Condor M, Mark C, Gerum RC, Grummel NC, Bauer A, Garcia-Aznar JM, Fabry B (2019) Breast Cancer Cells Adapt Contractile Forces to Overcome Steric Hindrance. Biophys J. 116 (2019) 1305-1312.

Steiner D, Lang G, Fischer L, Winkler S, Fey T, Greil P, Scheibel T, Horch RE, Arkudas A (2019) Intrinsic Vascularization of Recombinant eADF4(C16) Spider Silkmatrices in the AV Loop Model, Tissue Engineering Part A.

McMaster R, Hoefner C, Hrynevich A, Blum C, Wiesner M, Wittmann K, Dargaville TR, Bauer-Kreisel P, Groll J, Dalton PD, Blunk T (2019) Tailored Melt Electrowritten Scaffolds for the Generation of Sheet-Like Tissue Constructs from Multicellular Spheroids, Adv. Healthcare Mater. 2019, 1801326

Ertl J, Ortiz‐Soto ME, Le TA,Bechold J, Shan J, Teßmar J, Engels B, Seibel J (2019) Tuning the Product Spectrum of a Glycoside Hydrolase Enzyme by a Combination of Site-Directed Mutagenesis and Tyrosine-Specific Chemical Modification, Chem. Eur. J. 2019, 25, 1 – 11

Ziouti F*, Ebert R*, Rummler M, Krug M, Müller-Deubert S, Lüdemann M, Jakob F, Willie BM, Jundt F (2019) NOTCH signaling is activated through mechanical strain in human bone marrow-derived mesenchymal stromal cells, Stem Cells International Volume 2019, Article ID 5150634  *equal contribution

Ryma M, Blöhbaum J, Singh R, Sancho A, Matuszak J, Cicha I, Groll J (2019) Easy-to-Prepare Coating of Standard Cell Culture Dishes for Cell-Sheet Engineering Using Aqueous Solutions of Poly(2-n-propyl-oxazoline) ACS Biomater. Sci. Eng. 2019, 5, 3, 1509-1517

Blöhbaum J, Paulus I, Pöppler AC , Tessmar J, Groll J (2019) Influence of charged groups on the cross-linking efficiency and release of guest molecules from thiol–ene cross-linked poly(2-oxazoline) hydrogels. Journal of Biomaterials Chemistry B. 2019 Feb 13

Ryma M, Blöhbaum J, Singh R, Sancho A, Matuszak J, Cicha I, Groll J (2019) Easy-to-Prepare Coating of Standard Cell Culture Dishes for Cell-Sheet Engineering Using Aqueous Solutions of Poly(2-n-propyl-oxazoline), ACS Biomater. Sci. Eng. 2019, 5, 3, 1509-1517

Madonna R, Van Laake LW, Botker HE, Davidson SM, De Caterina R, Engel FB, Eschenhagen T, Fernandez-Aviles F, Hausenloy DJ, Hulot JS, Lecour S, Leor J, Menasché P, Pesce M, Perrino C, Prunier F, Van Linthout S, Ytrehus K, Zimmermann WH, Ferdinandy P, Sluijter JPG (2019). Position paper for Cardiovascular Research. ESC Working Group on Cellular Biology of the Heart: Tissue Engineering and Cell-Based Therapies for Cardiac Repair in Ischemic Heart Disease and Heart Failure. Cardiovasc Res. 2019 Jan 17.

Schaefer N, Janzen D, Bakirci E, Hrynevich A, Dalton PD, Villmann C (2019) 3D Electrophysiological Measurements on Cells Embedded within Fiber‐Reinforced Matrigel, Advanced Healthcare Materials

Ruther F, Distler T, Boccaccini AR, Detsch R (2019) Biofabrication of vessel-like structures with alginate di-aldehyde—gelatin (ADA-GEL) bioink, J Mater Sci Mater Med. 2018 Dec 29;30(1):8. doi: 10.1007/s10856-018-6205-7. January 2019, 30:8

Groll J, Burdick JA, Cho DW, Derby B, Gelinsky M, Heilshorn SC, Jüngst T, Malda J, Mironov VA, Nakayama K, Ovsianikov A, Sun W, Takeuchi S, Yoo JJ, Woodfield TBF (2019) A definition of bioinks and their distinction from biomaterial inks, Biofabrication. 2018 Nov 23;11(1):013001.

Präsentationen 2019

Altmann S, Mut J, Wolf N, Bechold J, Jakob F, Seibel J, Ebert R (2019) Glycoengineering as a tool to control the behavior of bone marrow-derived mesenchymal stromal cells in biofabrication processes, 1st MuSkITYR Symposium 2. – 3.12.2019 (Günzburg, Germany)

Detsch R (2019) Leben aus dem 3D Drucker: Chancen, Herausforderungen und Limitationen für verschiedene medizintechnische Anwendungen, Collegium Alexandrinum der Universität Erlangen-Nürnberg – Wissenschaft für die Öffentlichkeit – Novmber, 28, 2019 (Erlangen Germany)

Schmid R, Schmidt S, Hazur J, Detsch R, Boccaccini AR, Bosserhoff A, Horch RE, Arkudas A, Kengelbach-Weigand A (2019) Analyse von Tumor Dormancy und Progression in biofabrizierten und in vivo vaskularisierten 3D Modellen; 50. Jahrestagung der Deutschen Gesellschaft der Plastischen, Rekonstruktiven und Ästhetischen Chirurgen (DGPRÄC) September 26-28, 2019 (Hamburg, Germany)

Kengelbach-Weigand A (2019) In vitro und in vivo Modelle zur Erforschung der Mammakarzinompathogenese; 50. Jahrestagung der Deutschen Gesellschaft der Plastischen, Rekonstruktiven und Ästhetischen Chirurgen (DGPRÄC) September 26-28, 2019 (Hamburg, Germany)

Hazur J, Kaschta J, Schubert DW, Detsch R, Boccaccini AR (2019) Rheologische Charakterisierung und 3D Biodrucken von vorvernetzten Alginat Biotinten, WerkstoffWoche Dresden; September 18 to 20, 2019 (Dresden, Germany)

Trossmann V (2019) Rekombinante Spinnenseidenproteine für die Regeneration von Herzgewebe, WerkstoffWoche Dresden; September 18 to 20, 2019 (Dresden, Germany)

Lang G, Kumari S, Desimone E, Spengler C, Lücker S, Hudel M, Jacobs K, Krämer N, Scheibel T (2019) Bio-selective bacteriostatic and fungistatic surfaces made of recombinant spider silk proteins, 30th Annual Conference of the European Society for Biomaterials in tandem with the 26thAnnual Conference of the German Society for Biomaterials (DGBM); September 9 to 13, 2019 (Dresden, Germany)

Detsch R, Hazur J, Karakaya E, Kuth S, Heid S, Boccaccini AR (2019) Evaluating three different extrusion-based bioprinting systems using cell-laden alginate-based bioinks, 30th Annual Conference of the European Society for Biomaterials in tandem with the 26thAnnual Conference of the German Society for Biomaterials (DGBM); September 9 to 13, 2019 (Dresden, Germany)

Ryma M, Tylek T, Blöhbaum J, Fernandez R, Groll J (2019) Melt-Electrowritten 3D Scaffolds Based on Aligned Nano-Structured Microfibers for Topography-Mediated Immunomodulation of Human Macrophages, 30th Annual Conference of the European Society for Biomaterials in tandem with the 26thAnnual Conference of the German Society for Biomaterials (DGBM); September 9 to 13, 2019 (Dresden, Germany)

Shan J, Böck TC, Tessmar J, Groll J (2019) EMPO Oxidation of Hyaluronic Acid for Stable Hydrogel Formation via Schiff Base Chemistry, 30th Annual Conference of the European Society for Biomaterials in tandem with the 26thAnnual Conference of the German Society for Biomaterials (DGBM); September 9 to 13, 2019 (Dresden, Germany)

Trujillo Miranda M, Uribe J, Apsite I, DeSimone E, Salehi S, Ionov L (2019) Fabrication of tubular structure to mimic the osteon structure, 30th Annual Conference of the European Society for Biomaterials in tandem with the 26thAnnual Conference of the German Society for Biomaterials (DGBM); September 9 to 13, 2019 (Dresden, Germany)

Hahn L, Maier M, Sochor B, Beudert M, Lühmann T, Luxenhofer R (2019) Poly(2-oxazoline)/Poly(2-oxazine) based Copolymers: Physical gelation and related properties, 30th Annual Conference of the European Society for Biomaterials in tandem with the 26thAnnual Conference of the German Society for Biomaterials (DGBM); September 9 to 13, 2019 (Dresden, Germany)

Wieland A, Strissel PL, Bakirci E, Dalton PD, Feigenspan A, Villmann C, Strick R (2019) Soft matrix composites as three-dimensional models mimicking Glioblastoma in vitro, 30th Annual Conference of the European Society for Biomaterials in tandem with the 26thAnnual Conference of the German Society for Biomaterials (DGBM); September 9 to 13, 2019 (Dresden, Germany)

Genç H, Ryma M, Schneidereit D, Nadernezhad A, Groll J, Cicha I (2019) Pre-endothelialization of sacrificial microvessel structures for biofabrication of tissue models, 30th Annual Conference of the European Society for Biomaterials in tandem with the 26thAnnual Conference of the German Society for Biomaterials (DGBM); September 9 to 13, 2019 (Dresden, Germany)

Heid S, Detsch R, Boccaccini AR (2019) New Alginate-Based Composite Bioinks for Enhanced 3D Bioprinting; TERMIS EU Workshop 2019, August, 26 to 27 2019, (Nantes, France)

Kengelbach-Weigand A, Schmid R, Tasbihi K, Strissel PL, Strick R, Al-Abboodi M, An R, Robering JW, Eckstein M, Bäuerle T, Detsch R, Boccaccini AR, Dalton PD, Youssef A, Wolf K, Kremer AE, Boos AM, Bosserhoff A, Arkudas A, Horch RE (2019) The arteriovenous loop as 3D model for studying the interaction of ADSC and breast cancer cells, TERMIS EU Workshop 2019, 26th-27th Aug 2019, (Nantes, France)

Winkler S, Steiner D, Biggemann J, Fey T, Greil P, Körner C, Weisbach V, Meyer-Lindenberg A, Mutschall H, Arkudas A and Horch RE (2019) Intrinsic vascularization of ADSC-loaded hydrogel scaffolds in the rat AV loop model, The 11th EPSRC Meeting, 23-25 August 2019, Munich, Germany, Klinikum rechts der Isar, Technische Universität München (München, Germany)

Detsch R (2019) From the Fundamentals of Biofabrication towards Functional Tissue Models, 1st Heidelberg Workshop on 3D-Bioprinting, 18 July 2019 (Heidelberg, Germany).

Seibel J (2019) Bioorthogonal conjugation reactions for studying biological events, Gordon Research Conference Carbohydrates, Carbohydrate Synthesis and Research to Advance Glycobiology and Biomedicine June 23 – 28, 2019 (Hong Kong, China)

Jüngst T, Teßmar J, Dalton P, Groll J (2019) Bionik Development and Melt Electrowriting, Deutsches Zentrum für Luft-und Raumfahrt in Bonn, Workshop Additive Fertigung in der Raumfahrt. 28 May 2019 (Bonn, Germany)

Detsch R, Boccaccini AR (2019) Challenges in biofabrication of alginate-based bioinks for different biomedical approaches, Deutsches Zentrum für Luft-und Raumfahrt in Bonn, Workshop Additive Fertigung in der Raumfahrt. 28 May 2019 (Bonn, Germany)

Roshanbinfar K, Vogt L, Greber B, Diecke S, Boccaccini AR, Mohammadi Z, Mesgar AS, Dehghan MM, Oommen OP, Scheibel T, Hilborn J, Engel FB (2019) Electroconductive materials enhance maturation of hiPSC-derived cardiomyocytes in engineered cardiac tissues, TERMIS European Chapter Meeting 2019 27th – 31st May 2019, Rhodes, Greece Tissue Engineering Therapies: From Concept to Clinical Translation & Commercialisation

Salehi S (2019) Mimicking the osteon structure by biofabrication techniques, TERMIS European Chapter Meeting 2019 27th – 31st May 2019, Rhodes, Greece Tissue Engineering Therapies: From Concept to Clinical Translation & Commercialisation

Groll J (2019) 3D Printable Hydrogel-Bioinks: Rheological Implications and the Importance of Controlled Network Formation, TERMIS European Chapter Meeting 2019 27th -31st May 2019, Rhodes, Greece Tissue Engineering Therapies: From Concept to Clinical Translation & Commercialisation

Groll J (2019) Biofabrication – Chances, Challenges and Limits, Euro BioMAT 2019, 08 – 09 May 2019 (Jena-Weimar, Germany)

Kengelbach-Weigand A (2019) Das arteriovenöse Gefäßschleifenmodell als Tool für die Untersuchung der Interaktion von ADSC und Mammakarzinomzellen, 3. DAM Wissenschaftsakademie, 12 – 13 April 2019 (Erlangen, Germany)

Schmid R (2019) Analyse von Tumor dormancy und Progression in biofabrizierten und in vivo vaskularisierten 3D-Modellen, 3. DAM Wissenschaftsakademie, 12 – 13 April 2019 (Erlangen, Germany)

Heltmann-Meyer S (2019) Biofabrikation zellularisierter und im AV Loop vaskularisierter Gewebecontainer für die Transplantation wirkstoffproduzierender Zellen, 3. DAM Wissenschaftsakademie, 12 – 13 April 2019 (Erlangen, Germany)

Schrüfer S (2019) Rheology of alginates – some new insights, 9th Scientific Seminar of the North Bavarian Biomaterials Alliance (NBBA) was held at the Department of Materials Science and Engineering, University of Erlangen-Nuremberg, 21 February 2019 (Erlangen, Germany)

Schrüfer S (2019) Rheology on alginates, DGM Regionalforum Erlangen, „Metallische Werkstoffe für die Mobilität“ 4 February 2019, (Erlangen, Germany)

Salehi S, Kharaziha M, Ionov L, Scheibel T (2019) Composite ink development from bioceramic nanoparticles for bone tissue regeneration, 9th biennial Australian Colloid and Interface Symposium (ACIS) 3 – 7 February 2019 (Hobart, Tasmania, Australia)

Scheibel T (2019) Drug delivery vehicles based on engineered spider silk protein, 9th biennial Australian Colloid and Interface Symposium (ACIS) 3 – 7 February 2019 (Hobart, Tasmania, Australia)

Lang G (2019) Bio-selective bacteriostatic and fungistatic surfaces made of recombinant spider silk proteins, 9th biennial Australian Colloid and Interface Symposium (ACIS) 3 – 7 February 2019 (Hobart, Tasmania, Australia)

Trossmann V (2019) Recombinant spider silk proteins for cardiac tissue engineering, 9th biennial Australian Colloid and Interface Symposium (ACIS) 3 – 7 February 2019 (Hobart, Tasmania, Australia)

Sonnleitner D (2019) Poly-ε-caprolactone (PCL) particle – hydrogel colloid system for enhanced cell interaction, 9th biennial Australian Colloid and Interface Symposium (ACIS) 3 – 7 February 2019 (Hobart, Tasmania, Australia)

Poster 2019Fischer L, Karakaya E, Müller S, Schrüfer S, Distler T, Schubert DW, Gekle S, Fabry B, Boccaccini AR, Detsch R, Thievessen I (2019) Shear stress and cellular behaviour in 3 D biofabrication assays, Goodbye Flat Biology: Advancing 3D-based Models for Cancer Biology and Drug Discovery – 10.-13.11.2019 (Berlin, Germany)

Heid S, Detsch R, Boccaccini AR (2019) Is There an Optimum in the Design of Alginate-Based Composite Bioinks for 3D Bioprinting Regarding the Filler Concentration? Annual Conference of the International Society for Biofabrication (ISBF), 20-22 October 2019 (Columbus, Ohio, USA)

Karakaya E, Hazur J, Teßmar J, Boccaccini AR, Detsch R(2019) How to Determine a Suitable Sodium Alginate for the Fabrication of Standardized Alginatedialdehyde-Gelatin crosslinked Hydrogels in Biofabrication Approaches? Annual Conference of the International Society for Biofabrication (ISBF), 20-22 October 2019 (Columbus, Ohio, USA)

Altmann S, Mut J, Wolf N, Bechold J, Jakob F, Seibel J, Ebert R (2019) Glycoengineering as a tool to control the behavior of mesenchymal stem cells in biofabrication processes, 22nd European Congress on Alternatives to Animal Testing, 10-13 October 2019 (Linz, Austria)

Schmidt S, Mancini IAD, Boeck T, Abinzano F, Mensinga F, Hauptstein J, Tessmar J, van Weeren PR , Malda J, Groll J, Levato R, Blunk T (2019) EUREKA! Symposium, 9th and 10th October, 2019, Rudolf Virchow Center, (Würzburg, Germany)

Müller SJ, Bezold C, Gekle S (2019) Numerical Investigation of Cell Deformation during Bioprinting Processes, Annual workshop of the Franco-German Doctoral School, University of Bayreuth, 30th Sep and 1st Oct 2019 (Bayreuth, Germany)

Grummel N, Mark C, Böhringer D, Horder H, Strissel P, Strick R , Blunk T, Fabry B (2019) Invasion, migration and force generation of primary epithelial and mesenchymal breast cancer cells, 10th Physics of Cancer –  25-27 September 2019 (Leipzig, Germany)

Schrüfer S, Schubert DW (2019) Revealing critical model parameters for predicting the bioprintability of hydrogel systems, 16th biennial Bayreuth Polymer Symposium 2019 – 22.-24.09.2019 (Bayreuth, Germany)

Scheuring RG, Dogan L, Groll J, Ergün S (2019) 3D Printing of vascular wall-resident stem cells into tubular structures, 30th Annual Conference of the European Society for Biomaterials in tandem with the 26thAnnual Conference of the German Society for Biomaterials (DGBM); September 9 to 13, 2019 (Dresden, Germany)

Paulus I, Bloehbaum J, Tessmar J, Groll J (2019) Visible Light Cross-linked Poly(2-oxazoline) (POx)-based Hydrogels via Thiol-Ene Reaction, 30th Annual Conference of the European Society for Biomaterials in tandem with the 26thAnnual Conference of the German Society for Biomaterials (DGBM); September 9 to 13, 2019 (Dresden, Germany)

Herbig J, Shan J, Jüngst T, Albrecht K, Groll J (2019) Microgel based bioinks, 30th Annual Conference of the European Society for Biomaterials in tandem with the 26thAnnual Conference of the German Society for Biomaterials (DGBM); September 9 to 13, 2019 (Dresden, Germany)

Allen V, Gunselmann U, Schubert DW (2019) Revealing novel power laws and quantization in electrospinning considering jet splitting – Experimental, 30th Annual Conference of the European Society for Biomaterials in tandem with the 26thAnnual Conference of the German Society for Biomaterials (DGBM); September 9 to 13, 2019 (Dresden, Germany)

Janzen D, Bakirci E, Wieland A, Strissel PL, Strick R, Dalton PD, Villmann C (2019) Neuronal Networks in 3D Matrix Composites, 30th Annual Conference of the European Society for Biomaterials in tandem with the 26thAnnual Conference of the German Society for Biomaterials (DGBM); September 9 to 13, 2019 (Dresden, Germany)

Altmann S, Mut J, Wolf N, Bechold J, Jakob F, Seibel J, Ebert R (2019) Glycoengineering as a tool to control the behavior of mesenchymal stem cells in biofabrication processes, 30th Annual Conference of the European Society for Biomaterials in tandem with the 26thAnnual Conference of the German Society for Biomaterials (DGBM); September 9 to 13, 2019 (Dresden, Germany)

Schrüfer S, Schubert DW (2019) Revealing critical model parameters for predicting the bioprintability of hydrogel systems, 30th Annual Conference of the European Society for Biomaterials in tandem with the 26thAnnual Conference of the German Society for Biomaterials (DGBM); September 9 to 13, 2019 (Dresden, Germany)

Hazur J, Kaschta J, Schubert DW, Detsch R, Boccaccini AR (2019) Rheological examintation and 3D bioprinting of internally pre-crosslinked alginate bioinks, 30th Annual Conference of the European Society for Biomaterials in tandem with the 26thAnnual Conference of the German Society for Biomaterials (DGBM); September 9 to 13, 2019 (Dresden, Germany)

Heid S, Detsch R, Boccaccini AR (2019) Alginate-Based Composite Bioinks for 3D Biofabrication, 30th Annual Conference of the European Society for Biomaterials in tandem with the 26thAnnual Conference of the German Society for Biomaterials (DGBM); September 9 to 13, 2019 (Dresden, Germany)

Karakaya E, Teßmar J, Boccaccini AR, Detsch R (2019) Evaluation of the Biopolymer Modification for the Reproducible Production of Alginate-based Bioinks, 30th Annual Conference of the European Society for Biomaterials in tandem with the 26thAnnual Conference of the German Society for Biomaterials (DGBM); September 9 to 13, 2019 (Dresden, Germany)

Schrüfer S, Schubert DW (2019) Shear rheology of hydrogels – some new insights, 6th international symposium Interface Biology of Implants – IBI2019, 8 – 10 May 2019 (Warnemünde, Germany)

Schrüfer S, Schubert DW (2019)  Revealing critical model parameters for predicting the bioprintability of hydrogel systems, Nordic Polymer Days 2019 5 – 7 June 2019 (Trondheim, Norway)

Bakirci E, Dahri O, Ceballos E, Hrynevich A, Groll J, Schäfer N, Villmann C, Dalton PD(2019) Design and Development of a Melt Electrowritten in vitro Radial Migration Assay, TeRMIS European Chapter Meeting 2019 27th-31st May 2019, Tissue Engineering Therapies: From Concept to Clinical Translation & Commercialisation (Rhodes, Greece)

Salehi S (2019) Electrospun Stimuli-Responsive Mats for Muscle Tissue Regeneration, TeRMIS European Chapter Meeting 2019 27th-31st May 2019, Tissue Engineering Therapies: From Concept to Clinical Translation & Commercialisation (Rhodes, Greece)

Altmann S, Mut J, Wolf N, Bechold J, Jakob F, Seibel J, Ebert R (2019) Glycoengineering as a tool to control the behavior of mesenchymal stem cells in biofabrication processes, 46th European Calcified Tissue Society Congress, 11 – 14 May 2019 (Budapest, Hungary)

Hahn L, Beudert M, Lorson T, Lühmann T, Luxenhofer R (2019) Post-polymerization modification of thermogelling poly(2-oxazoline)/poly(2-oxazine) based hydrogels ensuring biocompatibility and temporal mechanical control, European Polymer Federation (EPF) Congress 9-14 June 2019 (Hersonissos, Crete, Greece)

Müller SJ, Bezold C, Gekle S (2019) Numerical Investigation of Cell Deformation during Bioprinting Processes, DPG-Frühjahrstagung 2019, 31 March – 5 April 2019, (Regensburg, Germany)

Publikationen 2018

Esser TU, Roshanbinfar K, Engel FB (2018) Promoting vascularization for tissue engineering constructs: current strategies focusing on HIF-regulating scaffolds Expert Opin Biol Ther. 2018 Dec 20.

Schneidereit D, Schürmann S, Friedrich O (2018) PiezoGRIN: a high-pressure chamber incorporating GRIN lenses for high-resolution 3D-microscopy of living cells and tissues, Advanced Science, Volume6, Issue4, February 20, 2019

Nait-Ouhra, A, Guckenberger, A, Farutin, A, Ez-Zahraouy, H, Benyoussef, A, Gekle, S and Misbah, C (2018) Lateral vesicle migration in a bounded shear flow: Viscosity contrast leads to off-centered solutions. Phys. Rev. Fluids 3, 123601

Gutmann M, Bechold J, Seibel J, Meinel L, Lühmann T  (2018) Metabolic Glycoengineering of Cell-Derived Matrices and Cell Surfaces: A Combination of Key Principles and Step-by-Step Procedures, ACS Biomater. Sci. Eng., Article ASAP

Rottensteiner-Brandl U, Detsch R, Sarker B, Lingens L, Köhn K, Kneser U, Bosserhoff AK, Horch RE, Boccaccini AR, Arkudas A. (2018) Encapsulation of Rat Bone Marrow Derived Mesenchymal Stem Cells in Alginate Dialdehyde/Gelatin Microbeads with and without Nanoscaled Bioactive Glass for In Vivo Bone Tissue Engineering. Materials (Basel). 2018 Oct 1;11(10). pii: E1880.

Weis M, Shan J, Kuhlmann M, Jungst T, Tessmar J, Groll J. (2018) Evaluation of Hydrogels Based on Oxidized Hyaluronic Acid for Bioprinting. Gels 2018, 4(4), 82.

Wicklein VJ, Singer BB, Scheibel T, Salehi S (2018) Nanoengineered biomaterials for corneal regeneration, anoengineered Biomaterials for Regenerative Medicine
A volume in Micro and Nano Technologies – Book Chapter 17; Pages 379-415, ISBN 978-0-12-813355-2 2019 Elsevier Inc., 2018 Sep 20

Lorson T, Lübtow MM, Wegener E, Haider MS, Borova S, Nahm D, Jordan R, Sokolski-Papkov M, Kabanov AV, Luxenhofer R. (2018) Poly(2-oxazoline)s based biomaterials: A comprehensive and critical update. Biomaterials. 2018 Sep;178:204-280.

Weigand A, Horch RE, Boos AM, Beier JP, Arkudas A. (2018) The Arteriovenous Loop: Engineering of Axially Vascularized Tissue, Eur Surg Res. 2018 Sep 21;59(3-4):286-299.

Roshanbinfar K, Vogt L, Greber B, Diecke S, Boccaccini A, Scheibel T, Engel FB. (2018) Electroconductive Biohybrid Hydrogel for Enhanced Maturation and Beating Properties of Engineered Cardiac Tissues, Adv Funct Mater, 2018 Sep 06

Engel FB (2018) Funktionale Gewebemodelle: Neue Materialien für die Herzgewebeersatztherapie, connexi – das Konferenzmagazin, connexi Kardiologie, Ausgabe 8-2018 The Paideia Group GmbH

Böck T, Schill V, Krähnke M, Steinert AF, Tessmar J, Blunk T, Groll J. (2018) TGF-β1-Modified Hyaluronic Acid/Poly(glycidol) Hydrogels for Chondrogenic Differentiation of Human Mesenchymal Stromal Cells, Macromol Biosci. 2018 Jul;18(7):e1700390.

Stafiej P, Küng F, Kruse FE, Schubert DW, Fuchsluger TA (2018) Mechanical and Optical Properties of PCL Nanofiber Reinforced Alginate Hydrogels for Application in Corneal Wound Healing, A SciTechnol Journal, Biomater Med Appl 2018, 2:2,

An R, Schmid R, Klausing A, Robering JW, Weber M, Bäuerle T, Detsch R, Boccaccini AR, Horch RE, Boos AM, Weigand A. (2018) Proangiogenic effects of tumor cells on endothelial progenitor cells vary with tumor type in an in vitro and in vivo rat model. FASEB J. 2018 Oct;32(10):5587-5601

Ortiz-Soto ME, Ertl J, Mut J, Ackermann J, Le TA, Shan J, Teßmar J, Schlosser A, Engels B, Seibel J. (2018) Product-oriented chemical surface modification of a levansucrase (SacB) via an ene-type reaction, Chem. Sci., 2018, Advance Article. 2018 May 22.   Front Cover Picture for Chemical Science              Press Release

Steiner D, Lingens L, Fischer L, Köhn K, Detsch R, Boccaccini AR, Fey T, Greil P, Weis C, Beier J, Horch RE, Arkudas A. (2018) Encapsulation of mesenchymal stem cells improves vascularization of alginate-based scaffolds. Tissue Eng Part A. 2018 Mar 20.    Front Cover for Tissue Engineering Part A

Hochleitner G, Fürsattel E, Giesa R, Groll J, Schmidt HW, Dalton PD. (2018). Melt Electrowriting of Thermoplastic Elastomers, Macromol. Rapid Commun. 2018 Apr 14:e1800055, 1800055.

Gutmann M, Braun A, Seibel J, Lühmann T. (2018). Bioorthogonal Modification of Cell Derived Matrices by Metabolic Glycoengineering. ACS Biomater. Sci. Eng. 2018 Mar 13

Präsentationen 2018

Friedrich O (2018) Taking a deep look‘ – Advanced 2-Photon Technologies to study Cell-Matrix Architecture in Tissue Engineering, Regenerative Medicine and  Organ Disease, Special Seminar, The University of Sydney, invited speaker, 12 December 2018 (Sydney, Autralia)

Groll J (2018) Biofabrication research at FMZ: from solution electrospun meshes to thiol-ene cross-linked hydrogel-bioinks, International Conference on Additive Manufacturing and Biomanufacturing,  2-4 December 2018 (Beijing, China)

Boccaccini AR (2018) Bioinks containing reactive fillers in biofabrication approaches, Invited presentation at West Pomeranian University of Technology, 22 November 2018 (Szczecin, Poland)

Boccaccini AR (2018) Bioactive Materials and Biofabrication for Biomedical Applications: Progress and Challenges, Invited speaker at Scientific Workshop 2018, Rostock University Medicine (Universitätsmedizin Rostock), 16 November 2018 (Rostock, Germany)

Groll J (2018) Bio-ink development for Biofabrication, International Conference on Emerging Healthcare Materials, 15-16 November 2018 (Seoul, South-Korea)

Engel FB (2018) TRR 225: Biofabrikation von funktionalen Gewebemodellen, Invited speaker at 27. Jahrestagung der Deutschen Transplantationsgesellschaft (DTG 2018), on 7-10 November 2018 (Berlin, Germany)

Boccaccini AR (2018) Bioactive materials and biofabrication for tissue engineering: achievements and challenges, Invited presentation at Polytechnic School (Escuela Politecnica Superior, EPS), University of Seville, 31 October 2018 (Seville, Spain)

Groll J (2018) SFB/TRR 225: From the Fundamentals of Biofabrication to Functional Tissue Models, International Conference on Biofabrication (ISBF) 2018, 28-31 October 2018 (Würzburg, Germany)

Engel FB (2018) New scaffolds for cardiac repair, Invited presentation at: International Conference on Biofabrication (ISBF) 2018, 28-31 October 2018 (Würzburg, Germany)

Roshanbinfar K (2018) Electroconductive Biohybrid Hydrogel for Enhanced Maturation and Beating Properties of Engineered Cardiac Tissues, Invited presentation at: International Conference on Biofabrication (ISBF) 2018, 28-31 October 2018 (Würzburg, Germany)

Ryma M, Blöhbaum J, Böhm C, Genc H, Dalton P, Cicha I, Groll J (2018) Prevascularization of Tissue Engineered Constructs via Melt Electrowriting of Thermoresponsive Poly(2-Oxazoline)s, International Conference on Biofabrication (ISBF) 2018, 28-31 October 2018 (Würzburg, Germany)

Luxenhofer R (2018) Pseudo-polypeptides forming thermoresponsive, biocompatible bioinks, International Conference on Biofabrication (ISBF) 2018, 28-31 October 2018 (Würzburg, Germany)

Boccaccini AR (2018) Development of composite bioinks incorporating bioreactive inorganic particles, Invited presentation at: International Conference on Biofabrication (ISBF) 2018, 28-31 October 2018 (Würzburg, Germany)

Detsch R, Distler T, Ruther F, Boccaccini AR (2018) Engineering of Vessel Grafts using Alginate di-aldehyde – Gelatin Bioink, International Conference on Biofabrication (ISBF) 2018, 28-31 October 2018 (Würzburg, Germany)

Scheibel T (2018) Biopolymer-based materials, Gesellschaft Deutscher Chemiker e.V. GDCh-Vortrag/Hamburg 25-26 October 2018 (Hamburg, Germany)

Scheibel T (2018) Was Spider-Man besser wissen sollte… , Landesamt für Gesundheit 23 October 2018 (Erlangen, Germany)

Scheibel T (2018) Biofabrication with bioinks made of rekombinant spider silk, N.I.C.E. Conference 2018, The 4th International Conference on Bioinspired and Biobased Chemistry & Materials, 14-17 October 2018 (Nice, France)

Boccaccini AR (2018) Biofabrication with alginate di-aldehyde / gelatin (ADA/GEL) hydrogels: progress, applications and challenges, Oral presentation at: Biomaterials and Novel Technologies for Healthcare, 2nd International Biennial Conference BioMaH, Frascati, 8-11 October, 2018 (Rome, Italy)

Lühmann T (2018) Nanomechanics of fibroblast growth factor 2 – heparin at physiological and pathophysiological conditions: Implications for drug delivery, Annual meeting of the DPhG. Hamburg, 4-6 October 2018 (Hamburg, Germany)

Scheibel T (2018) Siemens Healthcare GmbH 1 October 2018 (Kemnath, Germany)

Groll J (2018) Hydrogels as Bioinks for Biofabrication, MSE conference, 26-28 September 2018, (Darmstadt, Germany)

Detsch R, Liverani L, Boccaccini AR (2018) Biomaterials research in Erlangen: from bioactive materials to tissue scaffolds and biofabrication, UMN-FAU Workshop, 19-20 September 2018 (University Minnesota, USA)

Weigand A, Boos AM, An R, Strissel PL, Schmid R, Robering JW, Al-Abboodi M, Detsch R, Dalton PD, Youssef A , Boccaccini AR, Beckmann MW, Bäuerle T, Strick R, Horch RE (2018) Vom Tissue Engineering zum Tumor Engineering, 49. Jahrestagung der Deutsche Gesellschaft der Plastischen, Rekonstruktiven und Ästhetischen Chirurgen DGPRÄC & 23. Jahrestagung der Vereinigung der Deutschen Ästhetisch Plastischen Chirurgen (VDÄPC), 13-15 September 2018 (Bochum, Germany)

Groll J (2018) Melt Electro Writing at the Department of Functional Materials in Medicine and Dentistry, Annual Meeting of the European Society for Biomaterials,  10-13 September2018 (Maastricht, Netherlands)

Luxenhofer, R (2018) Pseudo-Polypeptides: From surface modification to drug delivery and 3D bioprinting, Tomas Bata University, 19 September 2018 (Zlín, Czech Republic)

Weigand A, Beier JP, Schmid R, Robering JW, Cai A, Arkudas A, Horch RE, Boos A (2018) Vascularized Tissue Engineering Using the Arteriovenous Loop – The Path from the Small Animal Model to the Preclinical Large Animal Model, 2018 TERMIS World Congress, 4-7 September 2018 (Kyoto, Japan)

Boccaccini AR (2018) Bioactive materials and biofabrication for tissue engineering applications. Invited seminar at: CONICET Laboratory of Integration of Cellular Signals at the Institute for Histology and Embryology, Faculty of Medicine, National University of Cuyo (UNCUYO), 27 August 2018 (Mendoza, Argentina)

Engel FB (2018) New scaffolds for cardiac repair, ESC Congress 2018 (European Cardiac Society) 25-29 August 2018 (Munich, Germany)

Peddi A, Steiner D, Weigand A, Lingens L, Fischer L, Köhn K, Detsch R, Boccaccini AR, Fey T, Greil P, Weis C, Beier JP, Horch RE, Arkudas A. (2018) Encapsulation of mesenchymal stem cells improves vascularization of alginate-based scaffolds,  The 10th EPSRC Meeting, 23-25 August 2018 (Hamburg, Germany)

Heltmann-Meyer S, Steiner D, Lang G, Winkler S, Fischer L, Fey T, Greil P, Scheibel T, Horch RE, Arkudas A. (2018) Intrinsic Vascularization of Recombinant eADF4(C16) Spider Silk fibrous matrices in the Arteriovenous Loop Model, The 10th EPSRC Meeting, 23-25 August 2018 (Hamburg, Germany)

Boccaccini AR (2018) Bioactive materials and biofabrication for bone and soft tissue engineering, Invited lecture at: Justus-Liebig-University Giessen, Medical School, 19 July 2018 (Giessen, Germany)

Groll J (2018) Biofabrication: Status of the field and translational perspective, 3D-BioNET-working-event, 18 July 2018 (Freiburg im Breisgau, Germany)

Lühmann T (2018) Tissue painting: Methods and application, Living materials meeting, Tufts University, European centre, 9-12 July 2018 (Talloires, France)

Boccaccini AR (2018) Bioactive materials and biofabrication for tissue engineering: progress and challenges. Invited speaker at: Junior EUROMAT 2018 Conference, 8-12 July 2018 (Budapest, Hungary)

Scheibel T (2018) Engineering, processing and applications of structural proteins, UPAC und Büroeröffnung 1-5 July 2018 (Melbourne Cairns, Australia)

Seibel J (2018) Glycoengineering as a tool for visualizing and redesigning the human and bacterial cell surfaces, GlykoT 2018, The 11th International Symposium on Glycosyltransferases, 19-23 June 2018 (Qingdao, China)

Groll J (2018) Biotinten: 3D-Druckbare Hydrogele als Schlüssel zum BioPrinting, Materialinnovationen 2018 – Vom Material zur Innovation, Konferenz zur Materialforschung des BMBF, 4-6 June 2018, (München, Germany)

Luxenhofer, R (2018) Poly(2-oxazoline) amphiphiles: From ultra-high loaded polymer micelles to 3D bioprinting, Invited speaker at Advanced Functional Polymers for Medicine, 16-18 May (Montpellier, France)

Groll J (2018) Hydrogels as “Bio-inks” for Biofabrication, 2nd Theodore von Kármán – Discussion Conference on Materials for Life: Bioinspired and Biomimetic Hydrogels, 15-18 April 2018, (Bensberg, Germany).

Groll J (2018) Bioinks: Concepts, Rheological Considerations and Recent Trends, TERMIS workshop on 3D Printing in Musculoskeletal Tissue Engineering: Bioprinting in Action, 23 March 2018 (Warsaw, Poland)

Boccaccini AR (2018) Enhancing alginate based bioinks for biofabrication: the composites approach, Invited speaker at: 1st TERMIS-EU Workshop on „3D Printing in Musculoskeletal Tissue Engineering”, 22-23 March 2018 (Warsaw, Poland)

Lorson T, Jaksch S, Jüngst T, Groll J, Lühmann T, Luxenhofer R. (2018)  Nanostructured, thermoresponsive and biocompatible hydrogels based on Poly(2-oxazoline)s for 3D bioprinting and biofabrication, Joint DIPC, JCNS & SoftComp Workshop 2018: Functional Polymers, 19-21 March 2018 (San Sebastian, Spain)

Boccaccini A. (2018) Bioactive materials and biofabrication approaches for hard tissue regeneration, Invited speaker at: 2nd Sino-German Symposium on Reconstruction and Repair of Musculoskeletal Tissues, Mainz University Medical Center, 13-14 March 2018 (Mainz, Germany).

Groll J (2018) 3D-Druckbare Hydrogele als Tinten für die Biofabrikation, Thüringer Biomaterial Kolloquium, 13- 15 March 2018 (Zeulenroda, Germany)

Bezold C, Bächer C, Gekle S. (2018) Simulations of stem cells in microjets, Deutsche Physikalische Gesellschaft (DPG), DPG Spring Meeting Berlin, March 11-16, 2018 (Berlin, Germany)

Poster 2018

Reineke B, Hauschild S, Förster S (2018) Development of microfluidic devices for the encapsulation of cells, Jülich Soft Matter Days 2018 20-23 November 2018 (Jülich, Germany)

Detsch R, Boccaccini AR (2018) Advances in Biomaterials for Biofabrication: 3D Printing with Bioinks, „Tag der Technischen Fakultät“ of the FAU Erlangen 16 November 2018 (Erlangen, Germany)

Schrüfer S, Himmler M, Schubert DW (2018) Shear rheology of nanofiber reinforced alginate solutions for bioprinting – establishing a basis , Jahrestagung der DGBM in Braunschweig 8-10 November 2018 (Braunschweig, Germany)

Beudert M, Hahn L, Lorson T, Deiwiks A, Luxenhofer R, Lühmann T (2018) Implementation of cell adhesion in thermogelling poly(2-oxazoline)-based hydrogels for their use as bioinks in bioprinting 6th Galenus Workshop.  6-8 November 2018 (Wuerzburg, Germany)

Salehi S, Ionov L, Scheibel T (2018) Bioactive Composite Ink for Bone Tissue Regeneration, Annual Conference of the International Society for Biofabrication (ISBF), 28-31 October 2018 (Würzburg, Germany)

Janzen D, Schaefer N, Bakirci E, Dalton PD, Strissel PL, Villmann C (2018) 3D Electrophysiology in Matrix Composites, Annual Conference of the International Society for Biofabrication (ISBF), 28-31 October 2018 (Würzburg, Germany)

Mechau J, Frank A, Böhm C, Giesa R, Dalton PD, Schmidt HW (2018) Melt Electrowriting of water-swelling (AB)n segmented block copolymers, Annual Conference of the International Society for Biofabrication (ISBF), 28-31 October 2018 (Würzburg, Germany)

Schmidt S, Mancini IAD, Boeck T, Abinzano F, Mensinga A, Martini J, Tessmar J, van Weeren PR, Malda J, Groll J, Levato R, Blunk T (2018) Chondrogenic Differentiation of Mesenchymal Stem Cells and Articular Cartilage Progenitor Cells in a 3D Printable Hyaluronic Acid Hydrogel, Annual Conference of the International Society for Biofabrication (ISBF), 28-31 October 2018 (Würzburg, Germany)

Schneidereit D, Sulistio AA, Bröllochs A, Lu K, Distler T, Schürmann S, Detsch R, Dendorfer A, Boccaccini AR, Friedrich O (2018) 3D Tissue Substructure: Using Multi-Photon Excitation to Reveal Cellular 3D Morphology of Natural and Engineered Tissue in Depth, Annual Conference of the International Society for Biofabrication (ISBF), 28-31 October 2018 (Würzburg, Germany)

Beudert M, Hahn L, Lorson T, Deiwiks A, Luxenhofer R, Lühmann T (2018) Biofunctionalization of thermogelling poly(2-oxazoline)-based hydrogels by Diels Alder chemistry, Annual Conference of the International Society for Biofabrication (ISBF), 28-31 October 2018 (Würzburg, Germany)

Hahn L, Hüttner N, Deiwiks A, Lorson T, Lühmann T, Luxenhofer R (2018) Poly-(2-methyl-2-oxazoline) and thermoresponsive poly(-2-n-propyl-oxazine): Different architecture same viscoelastic profile?, Annual Conference of the International Society for Biofabrication (ISBF), 28-31 October 2018 (Würzburg, Germany)

Fischer L, Karakaya E, Distler T, Boccaccini AR, Fabry B, Detsch R, Thievessen I (2018) Concept studies of the application of reporter cells in biofabrication approaches, Annual Conference of the International Society for Biofabrication (ISBF), 28-31 October 2018 (Würzburg, Germany)

Gensler M, Komma M, Heid S, Detsch R, Salehi S, Boccaccini AR, Hansmann J (2018) Bioreactor concepts for simultaneousprinting of bioreactor and tissue equivalent, Annual Conference of the International Society for Biofabrication (ISBF), 28-31 October 2018 (Würzburg, Germany)

Fischer L, Karakaya E, Distler T, Grummel N, Boccaccini AR, Fabry B, Detsch R, Thievessen I (2018) Shear stress and cellular behaviour in 3 D biofabrication assays, 9th Annual Symposium „Physics of Cancer“ 24-26 September 2018 (Leipzig, Germany)

Weigand A, Boos AM, An R, Strissel PL, Schmid R, Robering JW, Al-Abboodi M, Detsch R, Dalton PD, Youssef A , Boccaccini AR, Beckmann MW, Bäuerle T, Strick R, Horch RE (2018) From Tissue Engineering to Tumor Engineering –  Application of the arteriovenous loop model for the generation of a fully vascularized tumor in an animal model, 2018 TERMIS World Congress, 4-7 September 2018 (Kyoto, Japan)

Wieland A, Janzen D, Bakirci E, Schäfer N, Strissel PL, Strick R, Villmann C, Dalton P (2018) Ultra-soft Matrix Composites for 3D Neuroglia in vitro Research, Summer School “3D Printing Technologies”, 16-20 Jul 2018 (Würzburg, Germany)

Lorson T, Jüngst T, Jaksch S, Lühmann T, Luxenhofer R. (2018)  Biocompatible,Thermoresponsive, and Printable Poly(2-Oxazoline) Gels. Polymers: Design, Function and Application, 22-23 Mar 2018 (Barcelona, Spain)

Müller S, Gekle S. (2018) Multiple-relaxation-time Lattice Boltzmann Implementation of Non-Newtonian Fluids, Deutsche Physikalische Gesellschaft (DPG), DPG Spring Meeting Berlin,  11-16 March 2018 (Berlin, Germany)